标签:
通过按钮和菜单,组合成基本的功能,菜单的功能可以编码修改,但浏览功能是菜单基本的入口,只有角色赋予了浏览功能,才能访问。
基本按钮表
菜单模块
菜单分配按钮
角色授权
下面是对一张表的基本操作
模型
using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace MyRight.Model { /// <summary> /// 流水号 /// </summary> public partial class AkIv { /// <summary> /// 流水号 /// </summary> public int Id { get; set; } /// <summary> /// 条码 /// </summary> public string BarCode { get; set; } /// <summary> /// 时间 /// </summary> public DateTime DateTime { get; set; } /// <summary> /// 电池转换效率 /// </summary> public float Eff { get; set; } /// <summary> /// 短路电流 /// </summary> public float Isc { get; set; } /// <summary> /// 开路电压 /// </summary> public float Voc { get; set; } /// <summary> /// 串联电阻 /// </summary> public float Rs { get; set; } /// <summary> /// 并联电阻 /// </summary> public float Rsh { get; set; } /// <summary> /// 最大功率 /// </summary> public float Pmax { get; set; } /// <summary> /// 最大功率时的电压 /// </summary> public float Vpm { get; set; } /// <summary> /// 最大功率时的电流 /// </summary> public float Ipm { get; set; } /// <summary> /// 填充因子 /// </summary> public float FF { get; set; } /// <summary> /// 光强 /// </summary> public float Sun { get; set; } /// <summary> /// 温度 /// </summary> public float Temp { get; set; } /// <summary> /// 档位 /// </summary> public string Class { get; set; } /// <summary> /// 人员 /// </summary> public string Employee { get; set; } /// <summary> /// 线别 /// </summary> public string LineTitle { get; set; } /// <summary> /// 工位 /// </summary> public string StationTitle { get; set; } } }
存储过程
USE [Suncome] GO /****** Object: StoredProcedure [dbo].[proc_AkIv] Script Date: 08/28/2015 11:09:36 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[proc_AkIv] ( @queryType tinyint=0, @ID bigint=null,--流水号 @BarCode nvarchar(100)=null,--条码 @DateTime datetime=null,--时间 @Eff decimal=null,--电池转换效率 @Isc decimal=null,--为短路电流 @Voc decimal=null,--开路电压 @Rs decimal=null,--串联电阻 @Rsh decimal=null,--并联电阻 @Pmax decimal=null,--最大功率 @Vpm decimal=null,--最大功率时的电压 @Ipm decimal=null,--最大功率时的电流 @FF decimal=null,--填充因子 @Sun decimal=null,--光强 @Temp decimal=null,--温度 @Class nvarchar(50)=null,--档位 @Employee nvarchar(50)=null,--人员 @LineTitle nvarchar(50)=null,--线别 @StationTitle nvarchar(50)=null,--工位 @startIndex int=0, @endIndex int=18, @searchString nvarchar(1000)=‘‘, @orderString nvarchar(1000)=‘‘ ) AS if @searchString is null set @searchString=‘‘ if @orderString is null set @orderString=‘‘ if @queryType=0 --查询单条记录 begin select * from AkIv where ID=@ID end else if @queryType=1 --插入 begin insert into AkIv (BarCode,DateTime,Eff,Isc,Voc,Rs,Rsh,Pmax,Vpm,Ipm,FF,Sun,Temp,Class,Employee,LineTitle,StationTitle) values (@BarCode,@DateTime,@Eff,@Isc,@Voc,@Rs,@Rsh,@Pmax,@Vpm,@Ipm,@FF,@Sun,@Temp,@Class,@Employee,@LineTitle,@StationTitle) end else if @queryType=2 --更新 begin update AkIv set BarCode=@BarCode, DateTime=@DateTime, Eff=@Eff, Isc=@Isc, Voc=@Voc, Rs=@Rs, Rsh=@Rsh, Pmax=@Pmax, Vpm=@Vpm, Ipm=@Ipm, FF=@FF, Sun=@Sun, Temp=@Temp, Class=@Class, Employee=@Employee, LineTitle=@LineTitle, StationTitle=@StationTitle where ID=@ID end else if @queryType=3 --删除 begin delete from AkIv where ID=@ID end else if @queryType=6 --删除 begin declare @selectStr nvarchar(1000) set @selectStr=‘delete from AkIv ‘ + @searchString exec (@selectStr) end else if @queryType=4 --查询记录数 begin declare @countStr nvarchar(max) set @countStr = ‘select COUNT(1) from AkIv ‘+@searchString execute(@countStr) end else if @queryType=5 --查询记录 begin declare @select nvarchar(max) set @select= ‘ select * from ( select ROW_NUMBER() OVER (‘+@orderString+‘) AS Row,* from AkIv ‘+@searchString+‘ ) as AkIvlist WHERE (Row BETWEEN ‘+cast(@startIndex as nvarchar)+‘ AND ‘+cast(@endIndex as nvarchar)+‘ ) ‘ execute(@select) end else if @queryType=11 --根据组件条码查询最新单条记录 begin select top 1 * from AkIv where BarCode=@BarCode order by DateTime desc end
DAL
using System; using System.Configuration; using System.Data; using System.Data.SqlClient; using System.Collections.Generic; using System.Linq; using System.Text; using MyRight.Model; using MyRight.Common; namespace MyRight.DAL { public partial class AkIvRepository { private readonly string _connonnectionString; public AkIvRepository(string connonnectionString) { _connonnectionString = connonnectionString; } public AkIv GetSingle(string Id) { SqlParameter p_queryType = new SqlParameter("@queryType", SqlDbType.Int); p_queryType.Value = 0;//操作类型 SqlParameter p_Id = new SqlParameter("@Id", SqlDbType.NVarChar); p_Id.Value = Id;//主键 SqlParameter[] para = { p_queryType, p_Id }; SqlDataReader dr = SqlHelper.ExecuteReader(_connonnectionString, CommandType.StoredProcedure, "proc_AkIv", para); AkIv tabAkIv = new AkIv(); if (dr.Read()) tabAkIv = EntityLoad(dr); dr.Close(); return tabAkIv; } public AkIv GetSingleByBarcode(string Barcode) { SqlParameter p_queryType = new SqlParameter("@queryType", SqlDbType.Int); p_queryType.Value = 11;//操作类型 SqlParameter p_Barcode = new SqlParameter("@BarCode", SqlDbType.NVarChar); p_Barcode.Value = Barcode;//主键 SqlParameter[] para = { p_queryType, p_Barcode }; SqlDataReader dr = SqlHelper.ExecuteReader(_connonnectionString, CommandType.StoredProcedure, "proc_AkIv", para); AkIv tabAkIv = new AkIv(); if (dr.Read()) tabAkIv = EntityLoad(dr); dr.Close(); return tabAkIv; } public List<AkIv> GetPageList(int startIndex, int endIndex, string searchString, string orderString) { List<AkIv> listAkIv = new List<AkIv>(); SqlParameter p_queryType = new SqlParameter("@queryType", SqlDbType.Int); p_queryType.Value = 5;//操作类型 SqlParameter p_startIndex = new SqlParameter("@startIndex", SqlDbType.Int); p_startIndex.Value = startIndex;//起始位置 SqlParameter p_endIndex = new SqlParameter("@endIndex", SqlDbType.Int); p_endIndex.Value = endIndex;//结束位置 SqlParameter p_searchString = new SqlParameter("@searchString", SqlDbType.NVarChar); p_searchString.Value = searchString;//查询条件 SqlParameter p_orderString = new SqlParameter("@orderString", SqlDbType.NVarChar); p_orderString.Value = orderString;//排序条件 SqlParameter[] para = { p_queryType, p_startIndex, p_endIndex, p_searchString, p_orderString }; SqlDataReader dr = SqlHelper.ExecuteReader(_connonnectionString, CommandType.StoredProcedure, "proc_AkIv", para); while (dr.Read()) { AkIv tabAkIv = EntityLoad(dr); listAkIv.Add(tabAkIv); } dr.Close(); return listAkIv; } public int GetCount(string searchString) { SqlParameter p_queryType = new SqlParameter("@queryType", SqlDbType.Int); p_queryType.Value = 4;//操作类型 SqlParameter p_searchString = new SqlParameter("@searchString", SqlDbType.NVarChar); p_searchString.Value = searchString;//查询条件 SqlParameter[] para = { p_queryType, p_searchString }; return (int)SqlHelper.ExecuteScalar(_connonnectionString, CommandType.StoredProcedure, "proc_AkIv", para); } public int DeleteSingle(string Id) { SqlParameter p_queryType = new SqlParameter("@queryType", SqlDbType.Int); p_queryType.Value = 3;//操作类型 SqlParameter p_Id = new SqlParameter("@Id", SqlDbType.NVarChar); p_Id.Value = Id;//主键 SqlParameter[] para = { p_queryType, p_Id }; return SqlHelper.ExecuteNonQuery(_connonnectionString, CommandType.StoredProcedure, "proc_AkIv", para); } public int DeleteMulti(string searchString) { SqlParameter p_queryType = new SqlParameter("@queryType", SqlDbType.Int); p_queryType.Value = 6;//操作类型 SqlParameter p_searchString = new SqlParameter("@searchString", SqlDbType.NVarChar); p_searchString.Value = searchString;//查询条件 SqlParameter[] para = { p_queryType, p_searchString }; return SqlHelper.ExecuteNonQuery(_connonnectionString, CommandType.StoredProcedure, "proc_AkIv", para); } public int Update(AkIv obj) { SqlParameter p_queryType = new SqlParameter("@queryType", SqlDbType.Int); p_queryType.Value = 2;//操作类型 SqlParameter p_Id = new SqlParameter("@Id", SqlDbType.Int); p_Id.Value = obj.Id;//流水号 SqlParameter p_BarCode = new SqlParameter("@BarCode", SqlDbType.NVarChar, 100); p_BarCode.Value = obj.BarCode;//条码 SqlParameter p_DateTime = new SqlParameter("@DateTime", SqlDbType.DateTime); p_DateTime.Value = obj.DateTime;//时间 SqlParameter p_Eff = new SqlParameter("@Eff", SqlDbType.Float); p_Eff.Value = obj.Eff;//电池转换效率 SqlParameter p_Isc = new SqlParameter("@Isc", SqlDbType.Float); p_Isc.Value = obj.Isc;//短路电流 SqlParameter p_Voc = new SqlParameter("@Voc", SqlDbType.Float); p_Voc.Value = obj.Voc;//开路电压 SqlParameter p_Rs = new SqlParameter("@Rs", SqlDbType.Float); p_Rs.Value = obj.Rs;//串联电阻 SqlParameter p_Rsh = new SqlParameter("@Rsh", SqlDbType.Float); p_Rsh.Value = obj.Rsh;//并联电阻 SqlParameter p_Pmax = new SqlParameter("@Pmax", SqlDbType.Float); p_Pmax.Value = obj.Pmax;//最大功率 SqlParameter p_Vpm = new SqlParameter("@Vpm", SqlDbType.Float); p_Vpm.Value = obj.Vpm;//最大功率时的电压 SqlParameter p_Ipm = new SqlParameter("@Ipm", SqlDbType.Float); p_Ipm.Value = obj.Ipm;//最大功率时的电流 SqlParameter p_FF = new SqlParameter("@FF", SqlDbType.Float); p_FF.Value = obj.FF;//填充因子 SqlParameter p_Sun = new SqlParameter("@Sun", SqlDbType.Float); p_Sun.Value = obj.Sun;//光强 SqlParameter p_Temp = new SqlParameter("@Temp", SqlDbType.Float); p_Temp.Value = obj.Temp;//温度 SqlParameter p_Class = new SqlParameter("@Class", SqlDbType.NVarChar, 50); p_Class.Value = obj.Class;//档位 SqlParameter p_Employee = new SqlParameter("@Employee", SqlDbType.NVarChar, 50); p_Employee.Value = obj.Employee;//人员 SqlParameter p_LineTitle = new SqlParameter("@LineTitle", SqlDbType.NVarChar, 50); p_LineTitle.Value = obj.LineTitle;//线别 SqlParameter p_StationTitle = new SqlParameter("@StationTitle", SqlDbType.NVarChar, 50); p_StationTitle.Value = obj.StationTitle;//工位 SqlParameter[] para = { p_queryType, p_Id, p_BarCode, p_DateTime, p_Eff, p_Isc, p_Voc, p_Rs, p_Rsh, p_Pmax, p_Vpm, p_Ipm, p_FF, p_Sun, p_Temp, p_Class, p_Employee, p_LineTitle, p_StationTitle }; return SqlHelper.ExecuteNonQuery(_connonnectionString, CommandType.StoredProcedure, "proc_AkIv", para); } public int Insert(AkIv obj) { SqlParameter p_queryType = new SqlParameter("@queryType", SqlDbType.Int); p_queryType.Value = 1;//操作类型 SqlParameter p_Id = new SqlParameter("@Id", SqlDbType.Int); p_Id.Value = obj.Id;//流水号 SqlParameter p_BarCode = new SqlParameter("@BarCode", SqlDbType.NVarChar, 100); p_BarCode.Value = obj.BarCode;//条码 SqlParameter p_DateTime = new SqlParameter("@DateTime", SqlDbType.DateTime); p_DateTime.Value = obj.DateTime;//时间 SqlParameter p_Eff = new SqlParameter("@Eff", SqlDbType.Float); p_Eff.Value = obj.Eff;//电池转换效率 SqlParameter p_Isc = new SqlParameter("@Isc", SqlDbType.Float); p_Isc.Value = obj.Isc;//短路电流 SqlParameter p_Voc = new SqlParameter("@Voc", SqlDbType.Float); p_Voc.Value = obj.Voc;//开路电压 SqlParameter p_Rs = new SqlParameter("@Rs", SqlDbType.Float); p_Rs.Value = obj.Rs;//串联电阻 SqlParameter p_Rsh = new SqlParameter("@Rsh", SqlDbType.Float); p_Rsh.Value = obj.Rsh;//并联电阻 SqlParameter p_Pmax = new SqlParameter("@Pmax", SqlDbType.Float); p_Pmax.Value = obj.Pmax;//最大功率 SqlParameter p_Vpm = new SqlParameter("@Vpm", SqlDbType.Float); p_Vpm.Value = obj.Vpm;//最大功率时的电压 SqlParameter p_Ipm = new SqlParameter("@Ipm", SqlDbType.Float); p_Ipm.Value = obj.Ipm;//最大功率时的电流 SqlParameter p_FF = new SqlParameter("@FF", SqlDbType.Float); p_FF.Value = obj.FF;//填充因子 SqlParameter p_Sun = new SqlParameter("@Sun", SqlDbType.Float); p_Sun.Value = obj.Sun;//光强 SqlParameter p_Temp = new SqlParameter("@Temp", SqlDbType.Float); p_Temp.Value = obj.Temp;//温度 SqlParameter p_Class = new SqlParameter("@Class", SqlDbType.NVarChar, 50); p_Class.Value = obj.Class;//档位 SqlParameter p_Employee = new SqlParameter("@Employee", SqlDbType.NVarChar, 50); p_Employee.Value = obj.Employee;//人员 SqlParameter p_LineTitle = new SqlParameter("@LineTitle", SqlDbType.NVarChar, 50); p_LineTitle.Value = obj.LineTitle;//线别 SqlParameter p_StationTitle = new SqlParameter("@StationTitle", SqlDbType.NVarChar, 50); p_StationTitle.Value = obj.StationTitle;//工位 SqlParameter[] para = { p_queryType, p_Id, p_BarCode, p_DateTime, p_Eff, p_Isc, p_Voc, p_Rs, p_Rsh, p_Pmax, p_Vpm, p_Ipm, p_FF, p_Sun, p_Temp, p_Class, p_Employee, p_LineTitle, p_StationTitle }; return SqlHelper.ExecuteNonQuery(_connonnectionString, CommandType.StoredProcedure, "proc_AkIv", para); } public AkIv EntityLoad(SqlDataReader dr) { return new AkIv { Id = (dr["Id"] != DBNull.Value) ? Convert.ToInt32(dr["Id"]) : 0, BarCode = (dr["BarCode"] != DBNull.Value) ? dr["BarCode"].ToString() : "", DateTime = (dr["DateTime"] != DBNull.Value) ? Convert.ToDateTime(dr["DateTime"]) : DateTime.Now, Eff = (dr["Eff"] != DBNull.Value) ? Convert.ToSingle(dr["Eff"]) : 0, Isc = (dr["Isc"] != DBNull.Value) ? Convert.ToSingle(dr["Isc"]) : 0, Voc = (dr["Voc"] != DBNull.Value) ? Convert.ToSingle(dr["Voc"]) : 0, Rs = (dr["Rs"] != DBNull.Value) ? Convert.ToSingle(dr["Rs"]) : 0, Rsh = (dr["Rsh"] != DBNull.Value) ? Convert.ToSingle(dr["Rsh"]) : 0, Pmax = (dr["Pmax"] != DBNull.Value) ? Convert.ToSingle(dr["Pmax"]) : 0, Vpm = (dr["Vpm"] != DBNull.Value) ? Convert.ToSingle(dr["Vpm"]) : 0, Ipm = (dr["Ipm"] != DBNull.Value) ? Convert.ToSingle(dr["Ipm"]) : 0, FF = (dr["FF"] != DBNull.Value) ? Convert.ToSingle(dr["FF"]) : 0, Sun = (dr["Sun"] != DBNull.Value) ? Convert.ToSingle(dr["Sun"]) : 0, Temp = (dr["Temp"] != DBNull.Value) ? Convert.ToSingle(dr["Temp"]) : 0, Class = (dr["Class"] != DBNull.Value) ? dr["Class"].ToString() : "", Employee = (dr["Employee"] != DBNull.Value) ? dr["Employee"].ToString() : "", LineTitle = (dr["LineTitle"] != DBNull.Value) ? dr["LineTitle"].ToString() : "", StationTitle = (dr["StationTitle"] != DBNull.Value) ? dr["StationTitle"].ToString() : "" }; } } }
Controller
using System; using System.Collections.Generic; using System.Configuration; using System.Data; using System.Linq; using System.Web; using System.Web.Mvc; using fastJSON; using MyRight.Common; using MyRight.DAL; using MyRight.Model; namespace MyRight.Web.Controllers { [MyAuthorize] public class AkIvController : Controller { private readonly string _conn; private readonly AkIvRepository _akIvRepository; private readonly UserOperateLogRepository _userOperateLogRepository; public AkIvController() { _conn = ConnHelper.GetConnConfig(System.Web.HttpContext.Current); _akIvRepository = new AkIvRepository(_conn); _userOperateLogRepository = new UserOperateLogRepository(_conn); } public PartialViewResult List() { try { ViewBag.MenuCode = Request["menucode"];//菜单代码 ViewBag.MenuName = Request["menuname"];//菜单名称 } catch { } return PartialView(); } public string ListProcess() { string searchString = "";//查询条件 searchString = "where BarCode like ‘%@param%‘ and (DateTime between ‘@begin‘ and ‘@end‘)"; searchString = searchString.Replace("@param", Request["searchString"]); searchString = searchString.Replace("@begin", Request["begin"]); searchString = searchString.Replace("@end", Request["end"]); string orderString = "order by Id desc";//排序条件 if (!string.IsNullOrEmpty(Request["sort"]) && !string.IsNullOrEmpty(Request["order"])) { orderString = "order by " + Request["sort"] + " " + Request["order"]; } int pageindex = 0;//当前页 int pagesize = 0;//页面大小 if (!string.IsNullOrEmpty(Request["page"]) && !string.IsNullOrEmpty(Request["rows"])) { try { pageindex = int.Parse(Request["page"]); pagesize = int.Parse(Request["rows"]); } catch { } if (SqlInjection.GetString(Request["page"]) || SqlInjection.GetString(Request["rows"])) { SaveUserLog("AkIv分页条件注入", Request["page"] + " " + Request["rows"], true); pageindex = 1; pagesize = 20; } } //分页转换 int startIndex = (pageindex - 1) * pagesize + 1; int endIndex = pageindex * pagesize; List<AkIv> pageResult = _akIvRepository.GetPageList(startIndex, endIndex, searchString, orderString); string pageJsonResult = JSON.Instance.ToJSON(pageResult, JSONConfig.GetJSONParameters()); int count = _akIvRepository.GetCount(searchString); return "{\"total\": " + count + ",\"rows\":" + pageJsonResult + "}"; } public PartialViewResult Add() { return PartialView(); } public string AddProcess(AkIv akIv) { ResponseMessage responseMessage = new ResponseMessage(); int result = _akIvRepository.Insert(akIv); if (result > 0) { responseMessage.Message = "添加成功!"; responseMessage.Success = "true"; SaveUserLog("AkIv添加", JSON.Instance.ToJSON(akIv, JSONConfig.GetJSONParameters()), true); } else { responseMessage.Message = "添加失败!"; responseMessage.Success = "false"; SaveUserLog("AkIv添加", JSON.Instance.ToJSON(akIv, JSONConfig.GetJSONParameters()), false); } return JSON.Instance.ToJSON(responseMessage, JSONConfig.GetJSONParameters()); } public string DeleteProcess(string Id) { ResponseMessage responseMessage = new ResponseMessage(); string deleteString = "";//删除条件 if (Id.Length > 0) { Id = Id.Substring(1); deleteString = "where Id in (" + Id + ")"; } if (string.IsNullOrEmpty(deleteString)) { SaveUserLog("AkIv删除", "AkIv删除条件为空", false); responseMessage.Message = "删除失败!"; responseMessage.Success = "false"; return JSON.Instance.ToJSON(responseMessage, JSONConfig.GetJSONParameters()); } int result = _akIvRepository.DeleteMulti(deleteString); if (result > 0) { responseMessage.Message = "删除成功!"; responseMessage.Success = "true"; SaveUserLog("AkIv删除", deleteString, true); } else { responseMessage.Message = "删除失败!"; responseMessage.Success = "false"; SaveUserLog("AkIv删除", deleteString, false); } return JSON.Instance.ToJSON(responseMessage, JSONConfig.GetJSONParameters()); } public PartialViewResult Edit() { return PartialView(); } public string EditProcess(AkIv akIv) { ResponseMessage responseMessage = new ResponseMessage(); int result = _akIvRepository.Update(akIv); if (result > 0) { responseMessage.Message = "修改成功!"; responseMessage.Success = "true"; SaveUserLog("AkIv修改", JSON.Instance.ToJSON(akIv, JSONConfig.GetJSONParameters()), true); } else { responseMessage.Message = "修改失败!"; responseMessage.Success = "false"; SaveUserLog("AkIv修改", JSON.Instance.ToJSON(akIv, JSONConfig.GetJSONParameters()), false); } return JSON.Instance.ToJSON(responseMessage, JSONConfig.GetJSONParameters()); } public string GetIvDataUseBarcode() { string barcode = Request["barcode"]; AkIv akIv = _akIvRepository.GetSingleByBarcode(barcode); return JSON.Instance.ToJSON(akIv, JSONConfig.GetJSONParameters()); } //导出 public void Export() { string searchString = Request["searchString"]; string begin = Request["begin"]; string end = Request["end"]; Response.Clear(); Response.ContentType = "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet"; Response.AddHeader("Content-Disposition", string.Format("attachment;filename={0}", "IV.xlsx")); NPOI.XSSF.UserModel.XSSFWorkbook workbook = new NPOI.XSSF.UserModel.XSSFWorkbook(); NPOI.SS.UserModel.ISheet sheet1 = workbook.CreateSheet("IV"); //excel格式化 NPOI.SS.UserModel.ICellStyle dateStyle = workbook.CreateCellStyle(); dateStyle.DataFormat = workbook.CreateDataFormat().GetFormat("yyyy/m/d h:mm:ss"); NPOI.SS.UserModel.ICellStyle numberStyle = workbook.CreateCellStyle(); numberStyle.DataFormat = workbook.CreateDataFormat().GetFormat("0.00000"); NPOI.SS.UserModel.ICellStyle textStyle = workbook.CreateCellStyle(); textStyle.DataFormat = workbook.CreateDataFormat().GetFormat("@"); //给sheet1添加第一行的头部标题 NPOI.SS.UserModel.IRow row1 = sheet1.CreateRow(0); row1.CreateCell(0).SetCellValue("条码"); row1.CreateCell(1).SetCellValue("时间"); row1.CreateCell(2).SetCellValue("Eff"); row1.CreateCell(3).SetCellValue("Isc"); row1.CreateCell(4).SetCellValue("Voc"); row1.CreateCell(5).SetCellValue("Rs"); row1.CreateCell(6).SetCellValue("Rsh"); row1.CreateCell(7).SetCellValue("Pmax"); row1.CreateCell(8).SetCellValue("Vpm"); row1.CreateCell(9).SetCellValue("Ipm"); row1.CreateCell(10).SetCellValue("FF"); row1.CreateCell(11).SetCellValue("Sun"); row1.CreateCell(12).SetCellValue("Temp"); row1.CreateCell(13).SetCellValue("Class"); row1.CreateCell(14).SetCellValue("人员"); row1.CreateCell(15).SetCellValue("线别"); row1.CreateCell(16).SetCellValue("工位"); //将数据逐步写入sheet1各个行 string strSql = "where BarCode like ‘%@param%‘ and (DateTime between ‘@begin‘ and ‘@end‘)"; strSql = strSql.Replace("@param", searchString); strSql = strSql.Replace("@begin", begin); strSql = strSql.Replace("@end", end); List<AkIv> pageResult = _akIvRepository.GetPageList(0, 100000, strSql, "order by Id desc"); for (int i = 0; i < pageResult.Count; i++) { NPOI.SS.UserModel.IRow rowtemp = sheet1.CreateRow(i + 1); rowtemp.CreateCell(0).SetCellValue(pageResult[i].BarCode); rowtemp.CreateCell(1).SetCellValue(pageResult[i].DateTime); rowtemp.CreateCell(2).SetCellValue(Convert.ToDouble(string.Format("{0:0.00000}", pageResult[i].Eff))); rowtemp.CreateCell(3).SetCellValue(Convert.ToDouble(string.Format("{0:0.00000}", pageResult[i].Isc))); rowtemp.CreateCell(4).SetCellValue(Convert.ToDouble(string.Format("{0:0.00000}", pageResult[i].Voc))); rowtemp.CreateCell(5).SetCellValue(Convert.ToDouble(string.Format("{0:0.00000}", pageResult[i].Rs))); rowtemp.CreateCell(6).SetCellValue(Convert.ToDouble(string.Format("{0:0.00000}", pageResult[i].Rsh))); rowtemp.CreateCell(7).SetCellValue(Convert.ToDouble(string.Format("{0:0.00000}", pageResult[i].Pmax))); rowtemp.CreateCell(8).SetCellValue(Convert.ToDouble(string.Format("{0:0.00000}", pageResult[i].Vpm))); rowtemp.CreateCell(9).SetCellValue(Convert.ToDouble(string.Format("{0:0.00000}", pageResult[i].Ipm))); rowtemp.CreateCell(10).SetCellValue(Convert.ToDouble(string.Format("{0:0.00000}", pageResult[i].FF))); rowtemp.CreateCell(11).SetCellValue(Convert.ToDouble(string.Format("{0:0.00000}", pageResult[i].Sun))); rowtemp.CreateCell(12).SetCellValue(Convert.ToDouble(string.Format("{0:0.00000}", pageResult[i].Temp))); rowtemp.CreateCell(13).SetCellValue(pageResult[i].Class); rowtemp.CreateCell(14).SetCellValue(pageResult[i].Employee); rowtemp.CreateCell(15).SetCellValue(pageResult[i].LineTitle); rowtemp.CreateCell(16).SetCellValue(pageResult[i].StationTitle); rowtemp.GetCell(0).CellStyle = textStyle; rowtemp.GetCell(1).CellStyle = dateStyle; rowtemp.GetCell(2).CellStyle = numberStyle; rowtemp.GetCell(3).CellStyle = numberStyle; rowtemp.GetCell(4).CellStyle = numberStyle; rowtemp.GetCell(5).CellStyle = numberStyle; rowtemp.GetCell(6).CellStyle = numberStyle; rowtemp.GetCell(7).CellStyle = numberStyle; rowtemp.GetCell(8).CellStyle = numberStyle; rowtemp.GetCell(9).CellStyle = numberStyle; rowtemp.GetCell(10).CellStyle = numberStyle; rowtemp.GetCell(11).CellStyle = numberStyle; rowtemp.GetCell(12).CellStyle = numberStyle; rowtemp.GetCell(13).CellStyle = textStyle; rowtemp.GetCell(14).CellStyle = textStyle; rowtemp.GetCell(15).CellStyle = textStyle; rowtemp.GetCell(16).CellStyle = textStyle; } //写入到客户端 System.IO.MemoryStream ms = new System.IO.MemoryStream(); workbook.Write(ms); Response.BinaryWrite(ms.ToArray()); Response.Flush(); Response.End(); } private void SaveUserLog(string operateInfo, string description, bool ifSuccess) { User user = UserHelper.GetUser(System.Web.HttpContext.Current); UserOperateLog userOperateLog = new UserOperateLog() { UserName = user.UserName, UserIp = Request.UserHostAddress, OperateInfo = operateInfo, Description = description, IfSuccess = ifSuccess, OperateDate = DateTime.Now }; _userOperateLogRepository.Insert(userOperateLog); } } }
视图
<script type="text/javascript"> $(function () { $.ajax({ type: "POST", url: "Button/GetUserButton", data: { menucode: ‘@(ViewBag.MenuCode)‘ }, success: function (data) { if (data.search("<nimei></nimei>") > 0) { $.show_warning("提示", "无权限,请联系管理员!"); $(‘#tabs‘).tabs(‘close‘, ‘@(ViewBag.MenuName)‘); } else { $("#akiv_toolbar").html(data); //插入特殊按钮 var htm = _TEXT(function () { /* <td> <span style="margin-left: 5px;">开始时间:</span> <input class="easyui-datetimebox" id="akiv_begin" style="width:130px"> </td> <td> <span style="margin-left: 5px;">结束时间:</span> <input class="easyui-datetimebox" id="akiv_end" style="width:130px"> </td> <td flag="search"> <span style="margin-left: 5px;">条码:</span> <span class="l-btn-left" style="margin-left: -10px;"> <input id="akiv_searchstring" style="width: 130px;text-transform: uppercase;"> </span> </td> */ }); //修改菜单 $("#akiv_toolbar td[flag=‘search‘]").replaceWith(htm); //为菜单控件赋值 $("#akiv_begin").datetimebox({ value: ‘@Html.Raw(string.Format("{0:yyyy-MM-dd HH:mm:ss}", DateTime.Now.AddHours(-3)))‘, showSeconds: false }); $("#akiv_end").datetimebox({ value: ‘@Html.Raw(string.Format("{0:yyyy-MM-dd HH:mm:ss}", DateTime.Now.AddYears(1)))‘, showSeconds: false }); akiv_databind(); } } }); }); function _TEXT(wrap) { return wrap.toString().match(/\/\*\s([\s\S]*)\s\*\//)[1]; } function akiv_add() { $("<div></div>").dialog({ id: "akiv_add_dialog", href: "AkIv/Add", title: "添加按钮", height: 400, width: 500, modal: true, buttons: [{ id: "akiv_add_btn", text: ‘添 加‘, handler: function () { $("#akiv_addform").form("submit", { url: "AkIv/AddProcess", onSubmit: function () { $(‘#akiv_add_btn‘).linkbutton(‘disable‘); if ($(this).form(‘validate‘)) { return true; } else { $(‘#akiv_add_btn‘).linkbutton(‘enable‘); return false; } }, success: function (data) { var result = eval(‘(‘ + data + ‘)‘); if (result.Success) { $("#akiv_add_dialog").dialog(‘destroy‘); $.show_warning("提示", result.Message); akiv_databind(); } else { $(‘#akiv_add_btn‘).linkbutton(‘enable‘); $.show_warning("提示", result.Message); } } }); } }], onClose: function () { $("#akiv_add_dialog").dialog(‘destroy‘); } }); } function akiv_delete() { var rows = $("#akiv_dg").datagrid("getChecked"); if (rows.length < 1) { $.show_warning("提示", "请先勾选要删除的记录"); return; } $.messager.confirm(‘提示‘, ‘确定删除勾选的‘ + rows.length + ‘项?‘, function (rusult) { if (rusult) { var para = ""; $.each(rows, function (i, row) { para += ",‘" + row.Id + "‘"; }); $.ajax({ type: "POST", url: "AkIv/DeleteProcess", data: { "Id": para }, success: function (data) { var result = eval(‘(‘ + data + ‘)‘); if (result.Success) { $.show_warning("提示", result.Message); akiv_databind(); } else { $.show_warning("提示", result.Message); } } }); } }); } function akiv_edit() { var rows = $("#akiv_dg").datagrid("getChecked"); if (rows.length < 1) { $.show_warning("提示", "请先勾选要修改的记录"); return; } if (rows.length > 1) { $.show_warning("提示", "不支持批量修改"); return; } $("<div></div>").dialog({ id: "akiv_edit_dialog", href: "AkIv/Edit", title: "修改按钮", height: 400, width: 500, modal: true, buttons: [{ id: "akiv_edit_btn", text: ‘修 改‘, handler: function () { $("#akiv_editform").form("submit", { url: "AkIv/EditProcess", onSubmit: function () { $(‘#akiv_edit_btn‘).linkbutton(‘disable‘); if ($(this).form(‘validate‘)) { return true; } else { $(‘#akiv_edit_btn‘).linkbutton(‘enable‘); return false; } }, success: function (data) { var result = eval(‘(‘ + data + ‘)‘); if (result.Success) { $("#akiv_edit_dialog").dialog(‘destroy‘); $.show_warning("提示", result.Message); akiv_databind(); } else { $(‘#akiv_edit_btn‘).linkbutton(‘enable‘); $.show_warning("提示", result.Message); } } }); } }], onLoad: function () { $("#akiv_editform").find(‘[name=Id]‘).val(rows[0].Id); $("#akiv_editform").find(‘[name=BarCode]‘).val(rows[0].BarCode); $("#akiv_editform").find(‘[name=DateTime]‘).datetimebox({ value: rows[0].DateTime, showSeconds: false }); $("#akiv_editform").find(‘[name=Eff]‘).val(rows[0].Eff); $("#akiv_editform").find(‘[name=Isc]‘).val(rows[0].Isc); $("#akiv_editform").find(‘[name=Voc]‘).val(rows[0].Voc); $("#akiv_editform").find(‘[name=Rs]‘).val(rows[0].Rs); $("#akiv_editform").find(‘[name=Rsh]‘).val(rows[0].Rsh); $("#akiv_editform").find(‘[name=Pmax]‘).val(rows[0].Pmax); $("#akiv_editform").find(‘[name=Vpm]‘).val(rows[0].Vpm); $("#akiv_editform").find(‘[name=Ipm]‘).val(rows[0].Ipm); $("#akiv_editform").find(‘[name=FF]‘).val(rows[0].FF); $("#akiv_editform").find(‘[name=Sun]‘).val(rows[0].Sun); $("#akiv_editform").find(‘[name=Temp]‘).val(rows[0].Temp); $("#akiv_editform").find(‘[name=Class]‘).val(rows[0].Class); $("#akiv_editform").find(‘[name=Employee]‘).val(rows[0].Employee); $("#akiv_editform").find(‘[name=LineTitle]‘).val(rows[0].LineTitle); $("#akiv_editform").find(‘[name=StationTitle]‘).val(rows[0].StationTitle); }, onClose: function () { $("#akiv_edit_dialog").dialog(‘destroy‘); //销毁dialog对象 } }); } function akiv_databind() { var searchString = $(‘#akfqc_searchstring‘).val(); var begin = $(‘#akiv_begin‘).datetimebox(‘getValue‘); var end = $(‘#akiv_end‘).datetimebox(‘getValue‘); $("#akiv_dg").datagrid({ url: "AkIv/ListProcess", queryParams: { searchString: searchString, begin: begin, end: end }, striped: true, rownumbers: true, pagination: true, pageSize: 20, singleSelect: true, idField: ‘Id‘, sortName: ‘Id‘, sortOrder: ‘desc‘, pageList: [20, 40, 60, 80, 100], columns: [ [ { field: ‘ck‘, checkbox: true }, { field: ‘Id‘, title: ‘流水号‘, hidden: true }, { field: ‘BarCode‘, title: ‘条码‘, width: 150 }, { field: ‘DateTime‘, title: ‘时间‘, width: 150 }, { field: ‘Eff‘, title: ‘Eff‘, width: 100 }, { field: ‘Isc‘, title: ‘Isc‘, width: 100 }, { field: ‘Voc‘, title: ‘Voc‘, width: 100 }, { field: ‘Rs‘, title: ‘Rs‘, width: 100 }, { field: ‘Rsh‘, title: ‘Rsh‘, width: 100 }, { field: ‘Pmax‘, title: ‘Pmax‘, width: 100 }, { field: ‘Vpm‘, title: ‘Vpm‘, width: 100 }, { field: ‘Ipm‘, title: ‘Ipm ‘, width: 100 }, { field: ‘FF‘, title: ‘FF‘, width: 100 }, { field: ‘Sun‘, title: ‘Sun‘, width: 100 }, { field: ‘Temp‘, title: ‘Temp ‘, width: 100 }, { field: ‘Class‘, title: ‘Class‘, width: 100 }, { field: ‘Employee‘, title: ‘人员‘, width: 100 }, { field: ‘LineTitle‘, title: ‘线别‘, width: 100 }, { field: ‘StationTitle‘, title: ‘工位‘, width: 100 } ] ], toolbar: ‘#akiv_toolbar‘ }); } //导出 function akiv_export() { var searchString = $(‘#akiv_searchstring‘).val(); var begin = encodeURIComponent($(‘#akiv_begin‘).datetimebox(‘getValue‘)); var end = encodeURIComponent($(‘#akiv_end‘).datetimebox(‘getValue‘)); var href = "/AkIv/Export?searchString=" + searchString + "&begin=" + begin + "&end=" + end; $("#akiv_export_href").attr("href", href); var a = document.getElementById("akiv_export_href"); akfqc_invokeClick(a); } function akfqc_invokeClick(element) { if (element.click) element.click(); //判断是否支持click() 事件 else if (element.fireEvent) element.fireEvent(‘onclick‘); //触发click() 事件 else if (document.createEvent) { var evt = document.createEvent("MouseEvents"); //创建click() 事件 evt.initEvent("click", true, true); //初始化click() 事件 element.dispatchEvent(evt); //分发click() 事件 } } </script> <div id="akiv_layout" class="easyui-layout" data-options="fit:true,border:false"> <div data-options="region:‘center‘,border:false"> <table id="akiv_dg" data-options="fit:true,border:false"></table> </div> </div> <div id="akiv_toolbar" class="datagrid-toolbar"> </div> <a id="akiv_export_href" href="" style="display: none;" target="_blank" />
标签:
原文地址:http://www.cnblogs.com/zhongxinWang/p/4765953.html