标签：
全篇主要依赖下面２篇文章
http://quenlang.blog.51cto.com/4813803/1571635
http://www.cnblogs.com/mchina/archive/2013/02/20/2883404.html#!comments
nagios : http://sourceforge.net/projects/nagios/files/nagios-4.x/nagios-4.1.1/nagios-4.1.1.tar.gz/download
nagios-plugs : http://www.nagios-plugins.org/download/nagios-plugins-2.1.1.tar.gz
nrpe : http://sourceforge.net/projects/nagios/files/nrpe-2.x/nrpe-2.15/nrpe-2.15.tar.gz/download
hadoop1安装ganglia的gmetad、gmond及ganglia-web
新建一个 ganglia.rpm 文件,写入以下依赖组件
$ vim ganglia.rpm apr-devel apr-util check-devel cairo-devel pango-devel libxml2-devel glib2-devel dbus-devel freetype-devel fontconfig-devel gcc-c++ expat-devel python-devel
rrdtool
rrdtool-devel libXrender-devel zlib libart_lgpl libpng dejavu-lgc-sans-mono-fonts dejavu-sans-mono-fonts perl-ExtUtils-CBuilder perl-ExtUtils-MakeMaker
查看这些组件是否有安装
$ rpm -q `cat ganglia.rpm` package apr-devel is not installed apr-util-1.3.9-3.el6_0.1.x86_64 check-devel-0.9.8-1.1.el6.x86_64 cairo-devel-1.8.8-3.1.el6.x86_64 pango-devel-1.28.1-10.el6.x86_64 libxml2-devel-2.7.6-14.el6_5.2.x86_64 glib2-devel-2.28.8-4.el6.x86_64 dbus-devel-1.2.24-7.el6_3.x86_64 freetype-devel-2.3.11-14.el6_3.1.x86_64 fontconfig-devel-2.8.0-5.el6.x86_64 gcc-c++-4.4.7-11.el6.x86_64 package expat-devel is not installed python-devel-2.6.6-52.el6.x86_64 libXrender-devel-0.9.8-2.1.el6.x86_64 zlib-1.2.3-29.el6.x86_64 libart_lgpl-2.3.20-5.1.el6.x86_64 libpng-1.2.49-1.el6_2.x86_64 package dejavu-lgc-sans-mono-fonts is not installed package dejavu-sans-mono-fonts is not installed perl-ExtUtils-CBuilder-0.27-136.el6.x86_64 perl-ExtUtils-MakeMaker-6.55-136.el6.x86_64
使用 yum install 安装机器上没有的组件
还要安装 confuse
下载地址:http://www.nongnu.org/confuse/
$ tar -zxf confuse-2.7.tar.gz $ cd confuse-2.7 $ ./configure CFLAGS=-fPIC --disable-nls $ make && make install
hadoop1上安装
$ tar -xvf /home/hadoop/ganglia-3.6.0.tar.gz -C /opt/soft/ ## 安装gmetad $ ./configure --prefix=/usr/local/ganglia --with-gmetad --with-libpcre=no --enable-gexec --enable-status --sysconfdir=/etc/ganglia $ make && make install $ cp gmetad/gmetad.init /etc/init.d/gmetad $ cp /usr/local/ganglia/sbin/gmetad /usr/sbin/ $ chkconfig --add gmetad ## 安装gmond $ cp gmond/gmond.init /etc/init.d/gmond $ cp /usr/local/ganglia/sbin/gmond /usr/sbin/ $ gmond --default_config>/etc/ganglia/gmond.conf $ chkconfig --add gmond
gmetad、gmond安装成功，接着安装ganglia-web，首先要安装php和httpd
yum install php httpd -y
修改httpd的配置文件/etc/httpd/conf/httpd.conf，只把监听端口改为8080
Listen 8080
安装ganglia-web
$ tar xf ganglia-web-3.6.2.tar.gz -C /opt/soft/ $ cd /opt/soft/ $ chmod -R 777 ganglia-web-3.6.2/
$mv ganglia-web-3.6.2/ /var/www/html/ganglia
$ cd/var/www/html/ganglia$ useradd www-data
$ makeinstall
$ chmod777 /var/lib/ganglia-web/dwoo/cache/
$ chmod777 /var/lib/ganglia-web/dwoo/compiled/
至此ganglia-web安装完成，修改conf_default.php修改文件，指定ganglia-web的目录及rrds的数据目录，修改如下两行：
36 # Where gmetad stores the rrd archives. 37 $conf[‘gmetad_root‘] = "/var/www/html/ganglia"; ## 改为web程序的安装目录 38 $conf[‘rrds‘] = "/var/lib/ganglia/rrds"; ## 指定rrd数据存放的路径
创建rrd数据存放目录并授权
$ mkdir /var/lib/ganglia/rrds -p $ chown nobody:nobody /var/lib/ganglia/rrds/ -R
到这里，hadoop1上的ganglia的所有安装工作就完成了，接下来就是要在其他所有节点上安装ganglia的gmond客户端。
其他节点安装上gmond
也是要先安装依赖,然后在安装gmond,所有节点安装都是一样的,所以这里写个脚本
$ vim install_ganglia.sh #!/bin/sh #安装依赖 这是是我已经知道我缺少哪些依赖,所以只安装这些,具体按照你的环境来列出需要安装哪些 yum install -y apr-devel expat-devel rrdtool rrdtool-devel mkdir /opt/soft;cd /opt/soft tar -xvf /home/hadoop/confuse-2.7.tar.gz cd confuse-2.7 ./configure CFLAGS=-fPIC --disable-nls make && make install cd /opt/soft #安装 ganglia gmond tar -xvf /home/hadoop/ganglia-3.6.0.tar.gz cd ganglia-3.6.0/ ./configure --prefix=/usr/local/ganglia --with-libpcre=no --enable-gexec --enable-status --sysconfdir=/etc/ganglia make && make install cp gmond/gmond.init /etc/init.d/gmond cp /usr/local/ganglia/sbin/gmond /usr/sbin/ gmond --default_config>/etc/ganglia/gmond.conf chkconfig --add gmond
将这个脚本复制到所有节点执行
分为服务端和客户端的配置，服务端的配置文件为gmetad.conf,客户端的配置文件为gmond.conf
首先配置hadoop1上的gmetad.conf,这个文件只有hadoop1上有
$ vi /etc/ganglia/gmetad.conf ## 定义数据源的名字及监听地址，gmond会将收集的数据发送到数据源监听机器上的rrd数据目录中
## hadoop cluster 为自己定义
data_source "hadoop cluster" 192.168.0.101:8649
接着配置 gmond.conf
$ head -n 80 /etc/ganglia/gmond.conf /* This configuration is as close to 2.5.x default behavior as possible The values closely match ./gmond/metric.h definitions in 2.5.x */ globals { daemonize = yes ## 以守护进程运行 setuid = yes user = nobody ## 运行gmond的用户 debug_level = 0 ## 改为1会在启动时打印debug信息 max_udp_msg_len = 1472 mute = no ## 哑巴，本节点将不会再广播任何自己收集到的数据到网络上 deaf = no ## 聋子，本节点将不再接收任何其他节点广播的数据包 allow_extra_data = yes host_dmax = 86400 /*secs. Expires (removes from web interface) hosts in 1 day */ host_tmax = 20 /*secs */ cleanup_threshold = 300 /*secs */ gexec = no # By default gmond will use reverse DNS resolution when displaying your hostname # Uncommeting following value will override that value. # override_hostname = "mywebserver.domain.com" # If you are not using multicast this value should be set to something other than 0. # Otherwise if you restart aggregator gmond you will get empty graphs. 60 seconds is reasonable send_metadata_interval = 0 /*secs */ } /* * The cluster attributes specified will be used as part of the <CLUSTER> * tag that will wrap all hosts collected by this instance. */ cluster { name = "hadoop cluster" ## 指定集群的名字 owner = "nobody" ## 集群的所有者 latlong = "unspecified" url = "unspecified" } /* The host section describes attributes of the host, like the location */ host { location = "unspecified" } /* Feel free to specify as many udp_send_channels as you like. Gmond used to only support having a single channel */ udp_send_channel { #bind_hostname = yes # Highly recommended, soon to be default. # This option tells gmond to use a source address # that resolves to the machine‘s hostname. Without # this, the metrics may appear to come from any # interface and the DNS names associated with # those IPs will be used to create the RRDs. # mcast_join = 239.2.11.71 ## 单播模式要注释调这行 host = 192.168.0.101 ## 单播模式，指定接受数据的主机 port = 8649 ## 监听端口 ttl = 1 } /* You can specify as many udp_recv_channels as you like as well. */ udp_recv_channel { #mcast_join = 239.2.11.71 ## 单播模式要注释调这行 port = 8649 #bind = 239.2.11.71 ## 单播模式要注释调这行 retry_bind = true # Size of the UDP buffer. If you are handling lots of metrics you really # should bump it up to e.g. 10MB or even higher. # buffer = 10485760 } /* You can specify as many tcp_accept_channels as you like to share an xml description of the state of the cluster */ tcp_accept_channel { port = 8649 # If you want to gzip XML output gzip_output = no } /* Channel to receive sFlow datagrams */ #udp_recv_channel { # port = 6343 #} /* Optional sFlow settings */
好了，hadoop1上的gmetad.conf和gmond.conf配置文件已经修改完成，这时，直接将hadoop1上的gmond.conf文件scp到其他节点上相同的路径下覆盖原来的gmond.conf即可。
所有节点启动 gmond 服务
/etc/init.d/gmond start
hadoop1 节点启动 gmetad httpd 服务
/etc/init.d/gmetad start
/etc/init.d/httpd start
配置完成
此时，ganglia只是监控了各主机基本的性能，并没有监控到hadoop，接下来需要配置hadoop配置文件，这里以hadoop1上的配置文件为例，其他节点对应的配置文件应从hadoop1上拷贝，首先需要修改的是hadoop配置目录下的hadoop-metrics2.properties
$ cd /usr/local/hadoop-2.6.0/etc/hadoop/ $ vim hadoop-metrics2.properties # for Ganglia 3.1 support *.sink.ganglia.class=org.apache.hadoop.metrics2.sink.ganglia.GangliaSink31 *.sink.ganglia.period=10 # default for supportsparse is false *.sink.ganglia.supportsparse=true *.sink.ganglia.slope=jvm.metrics.gcCount=zero,jvm.metrics.memHeapUsedM=both *.sink.ganglia.dmax=jvm.metrics.threadsBlocked=70,jvm.metrics.memHeapUsedM=40 # Tag values to use for the ganglia prefix. If not defined no tags are used. # If ‘*‘ all tags are used. If specifiying multiple tags separate them with # commas. Note that the last segment of the property name is the context name. # #*.sink.ganglia.tagsForPrefix.jvm=ProcesName #*.sink.ganglia.tagsForPrefix.dfs= #*.sink.ganglia.tagsForPrefix.rpc= #*.sink.ganglia.tagsForPrefix.mapred= namenode.sink.ganglia.servers=192.168.0.101:8649
datanode.sink.ganglia.servers=192.168.0.101:8649
resourcemanager.sink.ganglia.servers=192.168.0.101:8649
nodemanager.sink.ganglia.servers=192.168.0.101:8649
mrappmaster.sink.ganglia.servers=192.168.0.101:8649
jobhistoryserver.sink.ganglia.serve=192.168.0.101:8649
复制到所有节点,重启hadoop集群
此时在监控中已经可以看到关于hadoop指标的监控了
新建nagios用户
# useradd -s /sbin/nologin nagios
# mkdir /usr/local/nagios
# chown -R nagios.nagios /usr/local/nagios
$ cd /opt/soft
$ tar zxvf nagios-3.4.3.tar.gz
$ cd nagios-3.4.3
$ ./configure --prefix=/usr/local/nagios
$ make al
$ make install
$ make install-init
$ make install-config
$ make install-commandmode
$ make install-webconf
切换目录到安装路径（这里是/usr/local/nagios），看是否存在etc、bin、sbin、share、var 这五个目录，如果存在则可以表明程序被正确的安装到系统了
$ cd /opt/soft $ tar zxvf nagios-plugins-1.4.16.tar.gz $ cd nagios-plugins-1.4.16
$ mkdir /user/local/nagios
$ ./configure --prefix=/usr/local/nagios $ make && make install
$ cd /opt/soft/ $ tar -xvf /home/hadoop/nrpe-2.15.tar.gz $ cd nrpe-2.15/ $ ./configure $ make all $ make install-plugin
datanode只要安装nagios-plugs 与 nrpe.
因为所有节点是一样的，这里写个脚本
#!/bin/sh adduser nagios cd /opt/soft tar xvf /home/hadoop/nagios-plugins-2.1.1.tar.gz cd nagios-plugins-2.1.1 mkdir /usr/local/nagios ./configure --prefix=/usr/local/nagios make && make install chown nagios.nagios /usr/local/nagios chown -R nagios.nagios /usr/local/nagios/libexec
#安装xinetd.看你的机器是否有xinetd,如果没有就安装，有的话就不用了
yum install xinetd -y
cd ../ tar xvf /home/hadoop/nrpe-2.15.tar.gz cd nrpe-2.15 ./configure make all make install-daemon make install-daemon-config make install-xinetd
安装完成后
修改nrpe.cfg
$ vim /usr/local/nagios/etc/nrpe.cfg
log_facility=daemon
pid_file=/var/run/nrpe.pid
## nagios的监听端口
server_port=5666
nrpe_user=nagios
nrpe_group=nagios
## nagios服务器主机地址
allowed_hosts=xx.xxx.x.xx
dont_blame_nrpe=0
allow_bash_command_substitution=0
debug=0
command_timeout=60
connection_timeout=300
## 监控负载
command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20
## 当前系统用户数
command[check_users]=/usr/local/nagios/libexec/check_users -w 5 -c 10
## 根分区空闲容量
command[check_sda2]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/sda2
## mysql状态
command[check_mysql]=/usr/local/nagios/libexec/check_mysql -H localhost -P 3306 -d kora -u kora -p upbjsxt
## 主机是否存活
command[check_ping]=/usr/local/nagios/libexec/check_ping -H localhost -w 100.0,20% -c 500.0,60%
## 当前系统的进程总数
command[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 150 -c 200
## swap使用情况
command[check_swap]=/usr/local/nagios/libexec/check_swap -w 20 -c 10
只有在被监控机器的这个配置文件中定义的命令，在监控机器（也就是hadoop1）上才能通过nrpe插件获取．也就是想监控机器的什么指标必须现在此处定义
同步到其他所有datanode节点
可以看到创建了这个文件/etc/xinetd.d/nrpe。
编辑这个脚本（图用的其他文章的图，版本号跟配置不一样，意思到就行了）：
在only_from 后增加监控主机的IP地址。
编辑/etc/services 文件，增加NRPE服务
重启xinted 服务
# service xinetd restart
查看NRPE 是否已经启动
可以看到5666端口已经在监听了。
在hadoop1上
要想让nagios与ganglia整合起来，就需要在hadoop1上把ganglia安装包中的ganglia的插件放到nagios的插件目录下
$ /opt/soft/ganglia-3.6.0 $ cp contrib/check_ganglia.py /usr/local/nagios/libexec/
默认的check_ganglia.py 插件中只有监控项的实际值大于critical阀值的情况，这里需要增加监控项的实际值小于critical阀值的情况，即最后添加的一段代码
$ vim /usr/local/nagios/libexec/check_ganglia.py 88 if critical > warning: 89 if value >= critical: 90 print "CHECKGANGLIA CRITICAL: %s is %.2f" % (metric, value) 91 sys.exit(2) 92 elif value >= warning: 93 print "CHECKGANGLIA WARNING: %s is %.2f" % (metric, value) 94 sys.exit(1) 95 else: 96 print "CHECKGANGLIA OK: %s is %.2f" % (metric, value) 97 sys.exit(0) 98 else: 99 if critical >=value: 100 print "CHECKGANGLIA CRITICAL: %s is %.2f" % (metric, value) 101 sys.exit(2) 102 elif warning >=value: 103 print "CHECKGANGLIA WARNING: %s is %.2f" % (metric, value) 104 sys.exit(1) 105 else: 106 print "CHECKGANGLIA OK: %s is %.2f" % (metric, value) 107 sys.exit(0)
最后改成上面这样
hadoop1上配置各个主机及对应的监控项
没配置前，现在目录结构是这样的
$ cd /usr/local/nagios/etc/objects/ $ ll total 48 -rw-rw-r-- 1 nagios nagios 8010 9月 11 14:59 commands.cfg -rw-rw-r-- 1 nagios nagios 2138 9月 11 11:35 contacts.cfg -rw-rw-r-- 1 nagios nagios 5375 9月 11 11:35 localhost.cfg -rw-rw-r-- 1 nagios nagios 3096 9月 11 11:35 printer.cfg -rw-rw-r-- 1 nagios nagios 3265 9月 11 11:35 switch.cfg -rw-rw-r-- 1 nagios nagios 10621 9月 11 11:35 templates.cfg -rw-rw-r-- 1 nagios nagios 3180 9月 11 11:35 timeperiods.cfg -rw-rw-r-- 1 nagios nagios 3991 9月 11 11:35 windows.cfg
注意：cfg的文件跟在配置后面的说明注释一定要用逗号，而不是＃号．我就是因为一开始用了＃号，结果一直出问题找不到是什么原因
修改 commands.cfg
在文件最后加上如下内容
# ‘check_ganglia‘ command definition define command{ command_name check_ganglia command_line $USER1$/check_ganglia.py -h $HOSTADDRESS$ -m $ARG1$ -w $ARG2$ -c $ARG3$ } # ‘check_nrpe‘ command definition define command{ command_name check_nrpe command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ }
修改templates.cfg
我有18台datanode机器，这里篇幅原因只截取５个，后面依次再加就行了
define service { use generic-service name ganglia-service1 ；这里的配置在service1.cfg中用到 hostgroup_name a01 ；这里的配置在hadoop1.cfg中用到 service_groups ganglia-metrics1 ；这里的配置在service1.cfg中用到 register 0 } define service { use generic-service name ganglia-service2 ；这里的配置在service2.cfg中用到 hostgroup_name a02 ；这里的配置在hadoop2.cfg中用到 service_groups ganglia-metrics2 ；这里的配置在service2.cfg中用到 register 0 } define service { use generic-service name ganglia-service3 ；这里的配置在service3.cfg中用到 hostgroup_name a03 ；这里的配置在hadoop3.cfg中用到 service_groups ganglia-metrics3 ；这里的配置在service3.cfg中用到 register 0 } define service { use generic-service name ganglia-service4 ；这里的配置在service4.cfg中用到 hostgroup_name a04 ；这里的配置在hadoop4.cfg中用到 service_groups ganglia-metrics4 ；这里的配置在service4.cfg中用到 register 0 } define service { use generic-service name ganglia-service5 ；这里的配置在service5.cfg中用到 hostgroup_name a05 ；这里的配置在hadoop5.cfg中用到 service_groups ganglia-metrics5 ；这里的配置在service5.cfg中用到 register 0 }
hadoop1.cfg 配置
这个默认是没有，用localhost.cfg 拷贝来
$cp localhost.cfg hadoop1.cfg
# vim hadoop1.cfg define host{ use linux-server host_name a01 alias a01 address a01 } define hostgroup { hostgroup_name a01 alias a01 members a01 } define service{ use local-service host_name a01 service_description PING check_command check_ping!100,20%!500,60% } define service{ use local-service host_name a01 service_description 根分区 check_command check_local_disk!20%!10%!/ # contact_groups admins } define service{ use local-service host_name a01 service_description 用户数量 check_command check_local_users!20!50 } define service{ use local-service host_name a01 service_description 进程数 check_command check_local_procs!550!650!RSZDT } define service{ use local-service host_name a01 service_description 系统负载 check_command check_local_load!5.0,4.0,3.0!10.0,6.0,4.0 }
service1.cfg 配置
默认没有service１.cfg，新建一个
$ vim service1.cfg define servicegroup { servicegroup_name ganglia-metrics1 alias Ganglia Metrics1 } ## 这里的check_ganglia为commonds.cfg中声明的check_ganglia命令 define service{ use ganglia-service1 service_description 内存空闲 check_command check_ganglia!mem_free!200!50 } define service{ use ganglia-service1 service_description NameNode同步 check_command check_ganglia!dfs.namenode.SyncsAvgTime!10!50
}
hadoop2.cfg 配置
需要注意使用check_nrpe插件的监控项必须要在hadoop2上的nrpe.cfg中声明
也就是每个service里的check_command必须在这台机器的 nrpe.cfg 中声明了才有用，比且要保证名称一样
$ cp localhost.cfg hadoop2.cfg
$ vim hadoop2.cfg
define host{ use linux-server ; Name of host template to use ; This host definition will inherit all variables that are defined ; in (or inherited by) the linux-server host template definition. host_name a02 alias a02 address a02 } # Define an optional hostgroup for Linux machines define hostgroup{ hostgroup_name a02; The name of the hostgroup alias a02 ; Long name of the group members a02 ; Comma separated list of hosts that belong to this group } # Define a service to "ping" the local machine define service{ use local-service ; Name of service template to use host_name a02 service_description PING check_command check_nrpe!check_ping } # Define a service to check the disk space of the root partition # on the local machine. Warning if < 20% free, critical if # < 10% free space on partition. define service{ use local-service ; Name of service template to use host_name a02 service_description Root Partition check_command check_nrpe!check_sda2 } # Define a service to check the number of currently logged in # users on the local machine. Warning if > 20 users, critical # if > 50 users. define service{ use local-service ; Name of service template to use host_name a02 service_description Current Users check_command check_nrpe!check_users } # Define a service to check the number of currently running procs # on the local machine. Warning if > 250 processes, critical if # > 400 users. define service{ use local-service ; Name of service template to use host_name a02 service_description Total Processes check_command check_nrpe!check_total_procs } define service{ use local-service ; Name of service template to use host_name a02 service_description Current Load check_command check_nrpe!check_load } # Define a service to check the swap usage the local machine. # Critical if less than 10% of swap is free, warning if less than 20% is free define service{ use local-service ; Name of service template to use host_name a02 service_description Swap Usage check_command check_nrpe!check_swap }
hadoop2的设置完，拷贝16份，因为datanode配置基本一样，就是hostname有点小区别
$ for i in {3..18};do cp hadoop2.cfg hadoop$i.cfg;done
将剩下里面hostname改下就行，后面就不说了
service2.cfg 配置
新建文件并配置
$ vim service2.cfg define servicegroup { servicegroup_name ganglia-metrics2 alias Ganglia Metrics2 } define service{ use ganglia-service2 service_description 内存空闲 check_command check_ganglia!mem_free!200!50 } define service{ use ganglia-service2 service_description RegionServer_Get check_command check_ganglia!yarn.NodeManagerMetrics.AvailableVCores!７!７ } define service{ use ganglia-service2 service_description DateNode_Heartbeat check_command check_ganglia!dfs.datanode.HeartbeatsAvgTime!15!40
service2的设置完，拷贝16份，因为datanode配置基本一样，就是servicegroup_name,use有点小区别
$ for i in {3..18};do scp service2.cfg service$i.cfg;done
改成对应的编号
修改 nagios.cfg
$ vim ../nagios.cfg cfg_file=/usr/local/nagios/etc/objects/commands.cfg cfg_file=/usr/local/nagios/etc/objects/contacts.cfg cfg_file=/usr/local/nagios/etc/objects/timeperiods.cfg cfg_file=/usr/local/nagios/etc/objects/templates.cfg #引进host文件 cfg_file=/usr/local/nagios/etc/objects/hadoop1.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop2.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop3.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop4.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop5.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop6.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop7.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop8.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop9.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop10.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop11.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop12.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop13.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop14.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop15.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop16.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop17.cfg cfg_file=/usr/local/nagios/etc/objects/hadoop18.cfg #引进监控项的文件 cfg_file=/usr/local/nagios/etc/objects/service1.cfg cfg_file=/usr/local/nagios/etc/objects/service2.cfg cfg_file=/usr/local/nagios/etc/objects/service3.cfg cfg_file=/usr/local/nagios/etc/objects/service4.cfg cfg_file=/usr/local/nagios/etc/objects/service5.cfg cfg_file=/usr/local/nagios/etc/objects/service6.cfg cfg_file=/usr/local/nagios/etc/objects/service7.cfg cfg_file=/usr/local/nagios/etc/objects/service8.cfg cfg_file=/usr/local/nagios/etc/objects/service9.cfg cfg_file=/usr/local/nagios/etc/objects/service10.cfg cfg_file=/usr/local/nagios/etc/objects/service11.cfg cfg_file=/usr/local/nagios/etc/objects/service12.cfg cfg_file=/usr/local/nagios/etc/objects/service13.cfg cfg_file=/usr/local/nagios/etc/objects/service14.cfg cfg_file=/usr/local/nagios/etc/objects/service15.cfg cfg_file=/usr/local/nagios/etc/objects/service16.cfg cfg_file=/usr/local/nagios/etc/objects/service17.cfg cfg_file=/usr/local/nagios/etc/objects/service18.cfg
验证配置是否正确
$ pwd /usr/local/nagios/etc $ ../bin/nagios -v nagios.cfg Nagios Core 4.1.1 Copyright (c) 2009-present Nagios Core Development Team and Community Contributors Copyright (c) 1999-2009 Ethan Galstad Last Modified: 08-19-2015 License: GPL Website: https://www.nagios.org Reading configuration data... Read main config file okay... Read object config files okay... Running pre-flight check on configuration data... Checking objects... Checked 161 services. Checked 18 hosts. Checked 18 host groups. Checked 18 service groups. Checked 1 contacts. Checked 1 contact groups. Checked 26 commands. Checked 5 time periods. Checked 0 host escalations. Checked 0 service escalations. Checking for circular paths... Checked 18 hosts Checked 0 service dependencies Checked 0 host dependencies Checked 5 timeperiods Checking global event handlers... Checking obsessive compulsive processor commands... Checking misc settings... Total Warnings: 0 Total Errors: 0 Things look okay - No serious problems were detected during the pre-flight check
没有错误，这时就可以启动hadoop1上的nagios服务
$ /etc/init.d/nagios start Starting nagios: done.
因为之前datanode上的nrpe已经启动了
测试hadoop1与datanode上nrpe通信是否正常
]$ for i in {10..28};do /usr/local/nagios/libexec/check_nrpe -H xx.xxx.x.$i;done NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15 NRPE v2.15
ok，通信正常，验证check_ganglia.py插件是否工作正常
$ /usr/local/nagios/libexec/check_ganglia.py -h a01.dmp2.ad.namenode.hadoop.qingdao.youku -m mem_free -w 200 -c 50 CHECKGANGLIA OK: mem_free is 61840868.00
工作正常，现在我们可以nagios的web页面，看是否监控成功。
localhost:8080/nagios
先检查服务器是否安装sendmail
$ rpm -q sendmail
$ yum install sendmail #如果没有就安装sendmail
$ service sendmail restart #重启sendmail
因为给外部发邮件，需要服务器自己有邮件服务器，这很麻烦并且非常占资源．这里我们配置一下，使用现有的STMP服务器
配置地址 /etc/mail.rc
$ vim /etc/mail.rc set from=systeminformation@xxx.com set smtp=mail.xxx.com smtp-auth-user=systeminformation smtp-auth-password=111111 smtp-auth=login
配置完毕之后，就可以先命令行测试一下，是否可以发邮件了
$ echo "hello world" |mail -s "test" pingjie@xxx.com
如果看你的邮件已经收到邮件了，说明sendmail已经没有问题．
下面配置nagios的邮件告警配置
$ vim /usr/local/nagios/etc/objects/contacts.cfg define contact{ contact_name nagiosadmin ; Short name of user use generic-contact ; Inherit default values from generic-contact template (defined above) alias Nagios Admin ; Full name of user ## 告警时间段 service_notification_period 24x7 host_notification_period 24x7 ## 告警信息格式 service_notification_options w,u,c,r,f,s host_notification_options d,u,r,f,s ## 告警方式为邮件 service_notification_commands notify-service-by-email host_notification_commands notify-host-by-email email pingjie@xxx.com ; <<***** CHANGE THIS TO YOUR EMAIL ADDRESS ****** } # We only have one contact in this simple configuration file, so there is # no need to create more than one contact group. define contactgroup{ contactgroup_name admins alias Nagios Administrators members nagiosadmin }
至此配置全部完成
标签：
原文地址：http://www.cnblogs.com/pingjie/p/4809489.html
