标签：
// 系统的约束代码
@implementation ViewController
- (void)viewDidLoad {
[super viewDidLoad];
UIView *superView = self.view;
UIView *viewDemo = [[UIView alloc] init];
viewDemo.translatesAutoresizingMaskIntoConstraints = NO;
viewDemo.backgroundColor = [UIColor orangeColor];
[superView addSubview:viewDemo];
UIEdgeInsets padding = UIEdgeInsetsMake(10, 10, 10, 10);
[superView addConstraints:@[
// viewDemo顶部距离父视图superView顶部距离为padding.top(即为：10)，
[NSLayoutConstraint constraintWithItem:viewDemo attribute:NSLayoutAttributeTop relatedBy:NSLayoutRelationEqual toItem:superView attribute:NSLayoutAttributeTop multiplier:1 constant:padding.top],
[NSLayoutConstraint constraintWithItem:viewDemo attribute:NSLayoutAttributeLeft relatedBy:NSLayoutRelationEqual toItem:superView attribute:NSLayoutAttributeLeft multiplier:1 constant:padding.left],
[NSLayoutConstraint constraintWithItem:viewDemo attribute:NSLayoutAttributeRight relatedBy:NSLayoutRelationEqual toItem:superView attribute:NSLayoutAttributeRight multiplier:1 constant:-padding.right],
[NSLayoutConstraint constraintWithItem:viewDemo attribute:NSLayoutAttributeBottom relatedBy:NSLayoutRelationEqual toItem:superView attribute:NSLayoutAttributeBottom multiplier:1 constant:-padding.bottom]
]];
}
// 注：若是把右边约束去掉，改为如下语句
// [NSLayoutConstraint constraintWithItem:viewDemo attribute:NSLayoutAttributeWidth relatedBy:NSLayoutRelationEqual toItem:superView attribute:NSLayoutAttributeWidth multiplier:0.5 constant:0]
// 则viewDemo的宽度变为superView的0.5倍！！
//***************************************************
// VFL语言
UIView *viewLeft = [[UIView alloc] init];
viewLeft.translatesAutoresizingMaskIntoConstraints = NO;
viewLeft.backgroundColor = [UIColor orangeColor];
[self.view addSubview:viewLeft];
UIView *viewRight = [[UIView alloc] init];
viewRight.translatesAutoresizingMaskIntoConstraints = NO;
viewRight.backgroundColor = [UIColor redColor];
[self.view addSubview:viewRight];
// horizontal：水平方向距左边10，距右边10
//简单说来，NSDictionaryOfVariableBindings(scrollView)就等于@{@”scrollView”: scrollView}
NSDictionary *constraintDict = NSDictionaryOfVariableBindings(viewLeft,viewRight);
NSArray *hConstraintArrayLeft = [NSLayoutConstraint constraintsWithVisualFormat:@"H:|-(10)-[viewLeft]-(10)-|" options:0 metrics:nil views:constraintDict];
// vertical： 垂直方向距顶部30，控件高度100
NSArray *vConstraintArrayLeft = [NSLayoutConstraint constraintsWithVisualFormat:@"V:|-(30)-[viewLeft(100)]" options:0 metrics:nil views:constraintDict];
// 添加到父视图上
[self.view addConstraints:hConstraintArrayLeft];
[self.view addConstraints:vConstraintArrayLeft];
NSArray *hConstraintArrayRight = [NSLayoutConstraint constraintsWithVisualFormat:@"H:|-(10)-[viewRight]-(10)-|" options:0 metrics:nil views:constraintDict];
// viewRight距viewLeft的垂直距离为50
NSArray *vConstraintArrayRight = [NSLayoutConstraint constraintsWithVisualFormat:@"V:[viewLeft]-(50)-[viewRight(200)]" options:0 metrics:nil views:constraintDict];
[self.view addConstraints:hConstraintArrayRight];
[self.view addConstraints:vConstraintArrayRight];
//***************************************************
// 三方库：Masonry
// 居中
// 快速定义一个weakSelf，用于block里面，防止循环引用
#define WS(weakSelf) __weak __typeof(&*self)weakSelf = self
WS(ws);
UIView *sv = [UIView new];
sv.backgroundColor = [UIColor orangeColor];
// 在做autoLayout之前 一定要先将view添加到superView上 否则会报错
[self.view addSubview:sv];
[sv mas_makeConstraints:^(MASConstraintMaker *make) {
// 居中
make.center.equalTo(ws.view);
// 设置size
make.size.mas_equalTo(CGSizeMake(300, 300));
}];
3. [初级] 让两个高度为150的view垂直居中且等宽且等间隔排列 间隔为10(自动计算其宽度)
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
|
int padding1 = 10;[sv2 mas_makeConstraints:^(MASConstraintMaker *make) { make.centerY.mas_equalTo(sv.mas_centerY); make.left.equalTo(sv.mas_left).with.offset(padding1); make.right.equalTo(sv3.mas_left).with.offset(-padding1); make.height.mas_equalTo(@150); make.width.equalTo(sv3);}];[sv3 mas_makeConstraints:^(MASConstraintMaker *make) { make.centerY.mas_equalTo(sv.mas_centerY); make.left.equalTo(sv2.mas_right).with.offset(padding1); make.right.equalTo(sv.mas_right).with.offset(-padding1); make.height.mas_equalTo(@150); make.width.equalTo(sv2);}]; |
代码效果
这里我们在两个子view之间互相设置的约束 可以看到他们的宽度在约束下自动的被计算出来了
4. [中级] 在UIScrollView顺序排列一些view并自动计算contentSize
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
|
UIScrollView *scrollView = [UIScrollView new];scrollView.backgroundColor = [UIColor whiteColor];[sv addSubview:scrollView];[scrollView mas_makeConstraints:^(MASConstraintMaker *make) { make.edges.equalTo(sv).with.insets(UIEdgeInsetsMake(5,5,5,5));}];UIView *container = [UIView new];[scrollView addSubview:container];[container mas_makeConstraints:^(MASConstraintMaker *make) { make.edges.equalTo(scrollView); make.width.equalTo(scrollView);}];int count = 10;UIView *lastView = nil;for ( int i = 1 ; i <= count ; ++i ){ UIView *subv = [UIView new]; [container addSubview:subv]; subv.backgroundColor = [UIColor colorWithHue:( arc4random() % 256 / 256.0 ) saturation:( arc4random() % 128 / 256.0 ) + 0.5 brightness:( arc4random() % 128 / 256.0 ) + 0.5 alpha:1]; [subv mas_makeConstraints:^(MASConstraintMaker *make) { make.left.and.right.equalTo(container); make.height.mas_equalTo(@(20*i)); if ( lastView ) { make.top.mas_equalTo(lastView.mas_bottom); } else { make.top.mas_equalTo(container.mas_top); } }]; lastView = subv;}[container mas_makeConstraints:^(MASConstraintMaker *make) { make.bottom.equalTo(lastView.mas_bottom);}]; |
头部效果
尾部效果
从scrollView的scrollIndicator可以看出 scrollView的内部已如我们所想排列好了
这里的关键就在于container这个view起到了一个中间层的作用 能够自动的计算uiscrollView的contentSize
5. [高级] 横向或者纵向等间隙的排列一组view
很遗憾 autoLayout并没有直接提供等间隙排列的方法(Masonry的官方demo中也没有对应的案例) 但是参考案例3 我们可以通过一个小技巧来实现这个目的 为此我写了一个Category
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
|
@implementation UIView(Masonry_LJC)- (void) distributeSpacingHorizontallyWith:(NSArray*)views{ NSMutableArray *spaces = [NSMutableArray arrayWithCapacity:views.count+1]; for ( int i = 0 ; i < views.count+1 ; ++i ) { UIView *v = [UIView new]; [spaces addObject:v]; [self addSubview:v]; [v mas_makeConstraints:^(MASConstraintMaker *make) { make.width.equalTo(v.mas_height); }]; } UIView *v0 = spaces[0]; __weak __typeof(&*self)ws = self; [v0 mas_makeConstraints:^(MASConstraintMaker *make) { make.left.equalTo(ws.mas_left); make.centerY.equalTo(((UIView*)views[0]).mas_centerY); }]; UIView *lastSpace = v0; for ( int i = 0 ; i < views.count; ++i ) { UIView *obj = views[i]; UIView *space = spaces[i+1]; [obj mas_makeConstraints:^(MASConstraintMaker *make) { make.left.equalTo(lastSpace.mas_right); }]; [space mas_makeConstraints:^(MASConstraintMaker *make) { make.left.equalTo(obj.mas_right); make.centerY.equalTo(obj.mas_centerY); make.width.equalTo(v0); }]; lastSpace = space; } [lastSpace mas_makeConstraints:^(MASConstraintMaker *make) { make.right.equalTo(ws.mas_right); }]; }- (void) distributeSpacingVerticallyWith:(NSArray*)views{ NSMutableArray *spaces = [NSMutableArray arrayWithCapacity:views.count+1]; for ( int i = 0 ; i < views.count+1 ; ++i ) { UIView *v = [UIView new]; [spaces addObject:v]; [self addSubview:v]; [v mas_makeConstraints:^(MASConstraintMaker *make) { make.width.equalTo(v.mas_height); }]; } UIView *v0 = spaces[0]; __weak __typeof(&*self)ws = self; [v0 mas_makeConstraints:^(MASConstraintMaker *make) { make.top.equalTo(ws.mas_top); make.centerX.equalTo(((UIView*)views[0]).mas_centerX); }]; UIView *lastSpace = v0; for ( int i = 0 ; i < views.count; ++i ) { UIView *obj = views[i]; UIView *space = spaces[i+1]; [obj mas_makeConstraints:^(MASConstraintMaker *make) { make.top.equalTo(lastSpace.mas_bottom); }]; [space mas_makeConstraints:^(MASConstraintMaker *make) { make.top.equalTo(obj.mas_bottom); make.centerX.equalTo(obj.mas_centerX); make.height.equalTo(v0); }]; lastSpace = space; } [lastSpace mas_makeConstraints:^(MASConstraintMaker *make) { make.bottom.equalTo(ws.mas_bottom); }];}@end |
简单的来测试一下
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
|
UIView *sv11 = [UIView new];UIView *sv12 = [UIView new];UIView *sv13 = [UIView new];UIView *sv21 = [UIView new];UIView *sv31 = [UIView new];sv11.backgroundColor = [UIColor redColor];sv12.backgroundColor = [UIColor redColor];sv13.backgroundColor = [UIColor redColor];sv21.backgroundColor = [UIColor redColor];sv31.backgroundColor = [UIColor redColor];[sv addSubview:sv11];[sv addSubview:sv12];[sv addSubview:sv13];[sv addSubview:sv21];[sv addSubview:sv31];//给予不同的大小 测试效果[sv11 mas_makeConstraints:^(MASConstraintMaker *make) { make.centerY.equalTo(@[sv12,sv13]); make.centerX.equalTo(@[sv21,sv31]); make.size.mas_equalTo(CGSizeMake(40, 40));}];[sv12 mas_makeConstraints:^(MASConstraintMaker *make) { make.size.mas_equalTo(CGSizeMake(70, 20));}];[sv13 mas_makeConstraints:^(MASConstraintMaker *make) { make.size.mas_equalTo(CGSizeMake(50, 50));}];[sv21 mas_makeConstraints:^(MASConstraintMaker *make) { make.size.mas_equalTo(CGSizeMake(50, 20));}];[sv31 mas_makeConstraints:^(MASConstraintMaker *make) { make.size.mas_equalTo(CGSizeMake(40, 60));}];[sv distributeSpacingHorizontallyWith:@[sv11,sv12,sv13]];[sv distributeSpacingVerticallyWith:@[sv11,sv21,sv31]];[sv showPlaceHolderWithAllSubviews];[sv hidePlaceHolder]; |
代码效果
perfect! 简洁明了的达到了我们所要的效果
这里所用的技巧就是 使用空白的占位view来填充我们目标view的旁边 这点通过图上的空白标注可以看出来
引自：http://www.cocoachina.com/ios/20141219/10702.html
若有侵权，请告知
标签：
原文地址：http://www.cnblogs.com/hyuganatsu/p/AutoLayout.html
