标签：linux
1、创建一个10G的文件系统，类型为ext4，要求开机可自动挂载至单独数据/data目录；
//确定是MBR/GPT
[root@a ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
├─sda1 8:1 0 2M 0 part
├─sda2 8:2 0 1G 0 part /boot
└─sda3 8:3 0 18.9G 0 part
├─centos-root 253:0 0 10G 0 lvm /
├─centos-swap 253:1 0 1G 0 lvm [SWAP]
└─centos-home 253:2 0 7.9G 0 lvm /home
sr0 11:0 1 1024M 0 rom
[root@a ~]# parted /dev/sda print
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sda: 21.5GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags: pmbr_boot
Number Start End Size File system Name Flags
1 1049kB 3146kB 2097kB bios_grub
2 3146kB 1077MB 1074MB xfs
3 1077MB 21.3GB 20.3GB lvm
//分割指定容量的磁盘
[root@a ~]# gdisk /dev/sda
GPT fdisk (gdisk) version 0.8.6
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): n
Partition number (4-128, default 4):
First sector (34-41943006, default = 41662464) or {+-}size{KMGTP}:
Last sector (41662464-41943006, default = 41943006) or {+-}size{KMGTP}: +10G
Current type is ‘Linux filesystem‘
Hex code or GUID (L to show codes, Enter = 8300):
Changed type of partition to ‘Linux filesystem‘
Command (? for help): P
Disk /dev/sda: 41943040 sectors, 20.0 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 974D2867-3522-4343-84A3-A2B26850627E
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 41943006
Partitions will be aligned on 2048-sector boundaries
Total free space is 180157 sectors (88.0 MiB)
Number Start (sector) End (sector) Size Code Name
1 2048 6143 2.0 MiB EF02
2 6144 2103295 1024.0 MiB 0700
3 2103296 41662463 18.9 GiB 8E00
4 41662464 41764863 10 GiB 8300 Linux filesystem
//写入磁盘分割表
Command (? for help): W
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): Y
OK; writing new GUID partition table (GPT) to /dev/sda.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
//更新磁盘分割表
[root@a ~]# partprobe -s
/dev/sda: gpt partitions 1 2 3 4
[root@a ~]# lsblk /dev/sda
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
├─sda1 8:1 0 2M 0 part
├─sda2 8:2 0 1G 0 part /boot
├─sda3 8:3 0 18.9G 0 part
│ ├─centos-root 253:0 0 10G 0 lvm /
│ ├─centos-swap 253:1 0 1G 0 lvm [SWAP]
│ └─centos-home 253:2 0 7.9G 0 lvm /home
└─sda4 8:4 0 10G 0 part
//格式化为ext4
[root@a ~]# mkfs.ext4 /dev/sda4
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
12824 inodes, 51200 blocks
2560 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=33685504
7 block groups
8192 blocks per group, 8192 fragments per group
1832 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961
Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
//挂载至/data
[root@a ~]# mkdir /data
[root@a ~]# blkid /dev/sda4
/dev/sda4: UUID="d25d227a-4372-4ef1-950b-a14c7bb7e993" TYPE="ext4" PARTLABEL="Linux filesystem" PARTUUID="f9e0bbae-55e5-4968-8157-c78a6229688e"
[root@a ~]# mount UUID="d25d227a-4372-4ef1-950b-a14c7bb7e993" /data
[root@a ~]# df /data
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda4 45478 1038 40856 3% /data2、显示`netstat -tan`命令结果中以‘LISTEN’后跟0个、1个或者多个空白字符结尾的行；
//0个 [root@a ~]# netstat -tan | grep -E "LISTEN[^[:space:]]" //1个或者多个 [root@a ~]# netstat -tan | grep -E "LISTEN[[:space:]]+" tcp 0 0 192.168.122.1:53 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN tcp6 0 0 :::22 :::* LISTEN tcp6 0 0 ::1:631 :::* LISTEN tcp6 0 0 ::1:25 :::* LISTEN
3、添加用户nginx、zabbix、tomcat、nologin以及hadoop用户（nologin用户的shell为/sbin/nologin）；而后找出/etc/passwd文件中用户名与其shell名相同的行；
//添加用户
[root@a ~]# useradd nginx
[root@a ~]# useradd zabbix
[root@a ~]# useradd tomcat
[root@a ~]# useradd nologin -s /sbin/nologin
[root@a ~]# useradd hadoop
//找出/etc/passwd文件中用户名与其shell名相同的行
[root@a ~]# grep "^([[:alnum:]]\{1,\}):.*\l$" /etc/passwd4、找出/etc/rc.d/init.d/functions文件中某单词（单词中间可以存在下划线）后面跟着一组小括号的行；
[root@a ~]# grep -n "[[:alpha:]]()" /etc/rc.d/init.d/functions
5、使用echo输出一个路径，而后egrep找出其路径基名；进一步的使用egrep取出其目录名（注意是目录名，而非目录路径）；
[root@a ~]# echo "/home/hi" | grep -E -o "[^/]+/?$" | cut -d"/" -f1 [root@a ~]$ echo "/home/hi" | egrep -o "^/[[:alnum:]]+"
6、查找/usr目录下不属于root、bin或hadoop的所有文件；
[root@a hi]# find /etc root bin hadoop [hi@a ~]$ find /etc -not -user hi -a -not -user bin -a -not -user hadoop
7、某天系统被入侵了，黑客在你系统下留下木马文件:
现需要查找当前系统上没有属主或属组，且最近一周内曾被访问过的所有文件；
另外，需要查找/etc目录下大于20k且类型为普通文件的所有文件；
[root@a hi]# find /etc -mtime -7 [hi@a ~]$ find /etc -size 20k -type f
8、创建目录/test/data，让某组内普通用户对其有写权限，且创建的所有文件的属组为目录所属的组；此外，每个用户仅能删除自己的文件。
[root@a hi]# mkdir -p /test/data [root@a hi]# chown root.tomcat /test/data [root@a hi]# usermod -g tomcat nginx [root@a hi]# usermod -g tomcat hadoop [root@a hi]# chmod -g+ws,o+t /test/data
linux运维实战练习案例-2015年12月20日-12月31日（第一次）
标签：linux
原文地址：http://fengzh09.blog.51cto.com/9992951/1730147
