标签：
1、安装SAMBA
yum -y install samba samba-client samba-common
2、修改文件打开数
vi /etc/security/limits.conf 最后添加 * soft nofile 65535 * hard nofile 65535
（需重启机器）
3、配置SAMBA
cp /etc/samba/smb.conf /etc/samba/smb.conf.bak #备份 vi/etc/samba/smb.conf 修改为： [global] log file = /var/log/samba/log.%m max log size = 50 security = user map to guest = Bad User#实现无密码访问 [PyDoc] path=/root/PythonProject readonly=yes browseable=yes writable = yes guest ok=yes
4、关闭防火墙
systemctl stop firewalld
systemctl disable firewalld
5、关闭SELinux
修改配置文件需要重启机器： vi /etc/selinux/config 将SELINUX=enforcing 改为SELINUX=disabled (需重启机器)
5、测试配置文件
testparm
6、启动SAMBA
systemctl restart smb #重启
systemctl enable smb #修改为开机启动
systemctl status smb #查看状态
7、在windows下输入\\192.168.49.200访问
8、解决win10无法访问共享文件夹
a、开启网络发现 b、开启SMBv1 To enable SMBv1 on the SMB client, run the following commands: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi sc.exe config mrxsmb10 start= auto c、开启SMBv1 To enable SMBv2 and SMBv3 on the SMB client, run the following commands: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi sc.exe config mrxsmb20 start= auto
CentOS7搭建SAMBA服务器实现与WIN10匿名共享文件
标签：
原文地址：http://www.cnblogs.com/dezai1223/p/5206858.html
