SQL向一个表中批量插入&&删除大量数据

导出到excel
EXEC master..xp_cmdshell ‘bcp SettleDB.dbo.shanghu out c:\temp1.xls -c -q -S"GNETDATA/GNETDATA" -U"sa" -P""‘
/***********  导入Excel
SELECT * 
FROM OpenDataSource( ‘Microsoft.Jet.OLEDB.4.0‘,
  ‘Data Source="c:\test.xls";User ID=Admin;Password=;Extended properties=Excel 5.0‘)...xactions

/*动态文件名
declare @fn varchar(20),@s varchar(1000)
set @fn = ‘c:\test.xls‘
set @s =‘‘‘Microsoft.Jet.OLEDB.4.0‘‘,
‘‘Data Source="‘+@fn+‘";User ID=Admin;Password=;Extended properties=Excel 5.0‘‘‘
set @s = ‘SELECT * FROM OpenDataSource (‘+@s+‘)...sheet1$‘
exec(@s)
*/

SELECT cast(cast(科目编号 as numeric(10,2)) as nvarchar(255))+‘　‘ 转换后的别名
FROM OpenDataSource( ‘Microsoft.Jet.OLEDB.4.0‘,
  ‘Data Source="c:\test.xls";User ID=Admin;Password=;Extended properties=Excel 5.0‘)...xactions

/********************** EXCEL导到远程SQL
insert OPENDATASOURCE(
         ‘SQLOLEDB‘,
         ‘Data Source=远程ip;User ID=sa;Password=密码‘
         ).库名.dbo.表名 (列名1,列名2)
SELECT 列名1,列名2
FROM OpenDataSource( ‘Microsoft.Jet.OLEDB.4.0‘,
  ‘Data Source="c:\test.xls";User ID=Admin;Password=;Extended properties=Excel 5.0‘)...xactions


/** 导入文本文件
EXEC master..xp_cmdshell ‘bcp dbname..tablename in c:\DT.txt -c -Sservername -Usa -Ppassword‘

/** 导出文本文件
EXEC master..xp_cmdshell ‘bcp dbname..tablename out c:\DT.txt -c -Sservername -Usa -Ppassword‘
或
EXEC master..xp_cmdshell ‘bcp "Select * from dbname..tablename" queryout c:\DT.txt -c -Sservername -Usa -Ppassword‘

导出到TXT文本，用逗号分开
exec master..xp_cmdshell ‘bcp "库名..表名" out "d:\tt.txt" -c -t ,-U sa -P password‘


BULK INSERT 库名..表名
FROM ‘c:\test.txt‘
WITH (
    FIELDTERMINATOR = ‘;‘,
    ROWTERMINATOR = ‘\n‘
)


--/* dBase IV文件
select * from 
OPENROWSET(‘MICROSOFT.JET.OLEDB.4.0‘
,‘dBase IV;HDR=NO;IMEX=2;DATABASE=C:\‘,‘select * from [客户资料4.dbf]‘)
--*/

--/* dBase III文件
select * from 
OPENROWSET(‘MICROSOFT.JET.OLEDB.4.0‘
,‘dBase III;HDR=NO;IMEX=2;DATABASE=C:\‘,‘select * from [客户资料3.dbf]‘)
--*/

--/* FoxPro 数据库
select * from openrowset(‘MSDASQL‘,
‘Driver=Microsoft Visual FoxPro Driver;SourceType=DBF;SourceDB=c:\‘,
‘select * from [aa.DBF]‘)
--*/

/**************导入DBF文件****************/
select * from openrowset(‘MSDASQL‘,
‘Driver=Microsoft Visual FoxPro Driver;
SourceDB=e:\VFP98\data;
SourceType=DBF‘,
‘select * from customer where country != "USA" order by country‘)
go
/***************** 导出到DBF ***************/
如果要导出数据到已经生成结构(即现存的)FOXPRO表中,可以直接用下面的SQL语句

insert into openrowset(‘MSDASQL‘,
‘Driver=Microsoft Visual FoxPro Driver;SourceType=DBF;SourceDB=c:\‘,
‘select * from [aa.DBF]‘)
select * from 表

说明:
SourceDB=c:\  指定foxpro表所在的文件夹
aa.DBF        指定foxpro表的文件名.

 


/*************导出到Access********************/
insert into openrowset(‘Microsoft.Jet.OLEDB.4.0‘, 
   ‘x:\A.mdb‘;‘admin‘;‘‘,A表) select * from 数据库名..B表

/*************导入Access********************/
insert into B表 selet * from openrowset(‘Microsoft.Jet.OLEDB.4.0‘, 
   ‘x:\A.mdb‘;‘admin‘;‘‘,A表)

文件名为参数
declare @fname varchar(20)
set @fname = ‘d:\test.mdb‘
exec(‘SELECT a.* FROM opendatasource(‘‘Microsoft.Jet.OLEDB.4.0‘‘,
    ‘‘‘+@fname+‘‘‘;‘‘admin‘‘;‘‘‘‘, topics) as a ‘)

SELECT * 
FROM OpenDataSource( ‘Microsoft.Jet.OLEDB.4.0‘,
  ‘Data Source="f:\northwind.mdb";Jet OLEDB:Database Password=123;User ID=Admin;Password=;‘)...产品

*********************  导入 xml　文件

DECLARE @idoc int
DECLARE @doc varchar(1000)
--sample XML document
SET @doc =‘
<root>
  <Customer cid= "C1" name="Janine" city="Issaquah">
      <Order oid="O1" date="1/20/1996" amount="3.5" />
      <Order oid="O2" date="4/30/1997" amount="13.4">Customer was very satisfied
      </Order>
   </Customer>
   <Customer cid="C2" name="Ursula" city="Oelde" >
      <Order oid="O3" date="7/14/1999" amount="100" note="Wrap it blue 
             white red">
            <Urgency>Important</Urgency>
            Happy Customer.
      </Order>
      <Order oid="O4" date="1/20/1996" amount="10000"/>
   </Customer>
</root>
‘
-- Create an internal representation of the XML document.
EXEC sp_xml_preparedocument @idoc OUTPUT, @doc

-- Execute a SELECT statement using OPENXML rowset provider.
SELECT *
FROM OPENXML (@idoc, ‘/root/Customer/Order‘, 1)
      WITH (oid     char(5), 
            amount  float, 
            comment ntext ‘text()‘)
EXEC sp_xml_removedocument @idoc



/**********************Excel导到Txt****************************************/
想用
select * into opendatasource(...) from opendatasource(...)
实现将一个Excel文件内容导入到一个文本文件

假设Excel中有两列，第一列为姓名，第二列为很行帐号(16位)
且银行帐号导出到文本文件后分两部分，前8位和后8位分开。


邹健：
如果要用你上面的语句插入的话,文本文件必须存在,而且有一行:姓名,银行账号1,银行账号2
然后就可以用下面的语句进行插入
注意文件名和目录根据你的实际情况进行修改.

insert into
opendatasource(‘MICROSOFT.JET.OLEDB.4.0‘
,‘Text;HDR=Yes;DATABASE=C:\‘
)...[aa#txt]
--,aa#txt)
--*/
select 姓名,银行账号1=left(银行账号,8),银行账号2=right(银行账号,8) 
from 
opendatasource(‘MICROSOFT.JET.OLEDB.4.0‘
,‘Excel 5.0;HDR=YES;IMEX=2;DATABASE=c:\a.xls‘
--,Sheet1$)
)...[Sheet1$]

 

如果你想直接插入并生成文本文件,就要用bcp

declare @sql varchar(8000),@tbname varchar(50)

--首先将excel表内容导入到一个全局临时表
select @tbname=‘[##temp‘+cast(newid() as varchar(40))+‘]‘
 ,@sql=‘select 姓名,银行账号1=left(银行账号,8),银行账号2=right(银行账号,8) 
 into ‘+@tbname+‘ from 
opendatasource(‘‘MICROSOFT.JET.OLEDB.4.0‘‘
,‘‘Excel 5.0;HDR=YES;IMEX=2;DATABASE=c:\a.xls‘‘
)...[Sheet1$]‘
exec(@sql)

--然后用bcp从全局临时表导出到文本文件
set @sql=‘bcp "‘+@tbname+‘" out "c:\aa.txt" /S"(local)" /P"" /c‘
exec master..xp_cmdshell @sql

--删除临时表
exec(‘drop table ‘+@tbname)


/********************导整个数据库*********************************************/

用bcp实现的存储过程


/*
 实现数据导入/导出的存储过程
         根据不同的参数,可以实现导入/导出整个数据库/单个表
 调用示例:
--导出调用示例
----导出单个表
exec file2table ‘zj‘,‘‘,‘‘,‘xzkh_sa..地区资料‘,‘c:\zj.txt‘,1
----导出整个数据库
exec file2table ‘zj‘,‘‘,‘‘,‘xzkh_sa‘,‘C:\docman‘,1

--导入调用示例
----导入单个表
exec file2table ‘zj‘,‘‘,‘‘,‘xzkh_sa..地区资料‘,‘c:\zj.txt‘,0
----导入整个数据库
exec file2table ‘zj‘,‘‘,‘‘,‘xzkh_sa‘,‘C:\docman‘,0

*/
if exists(select 1 from sysobjects where name=‘File2Table‘ and objectproperty(id,‘IsProcedure‘)=1)
 drop procedure File2Table
go
create procedure File2Table
@servername varchar(200)  --服务器名
,@username varchar(200)   --用户名,如果用NT验证方式,则为空‘‘
,@password varchar(200)   --密码
,@tbname varchar(500)   --数据库.dbo.表名,如果不指定:.dbo.表名,则导出数据库的所有用户表
,@filename varchar(1000)  --导入/导出路径/文件名,如果@tbname参数指明是导出整个数据库,则这个参数是文件存放路径,文件名自动用表名.txt
,@isout bit      --1为导出,0为导入
as
declare @sql varchar(8000)

if @tbname like ‘%.%.%‘ --如果指定了表名,则直接导出单个表
begin
 set @sql=‘bcp ‘+@tbname
  +case when @isout=1 then ‘ out ‘ else ‘ in ‘ end
  +‘ "‘+@filename+‘" /w‘
  +‘ /S ‘+@servername
  +case when isnull(@username,‘‘)=‘‘ then ‘‘ else ‘ /U ‘+@username end
  +‘ /P ‘+isnull(@password,‘‘)
 exec master..xp_cmdshell @sql
end
else
begin --导出整个数据库,定义游标,取出所有的用户表
 declare @m_tbname varchar(250)
 if right(@filename,1)<>‘\‘ set @filename=@filename+‘\‘

 set @m_tbname=‘declare #tb cursor for select name from ‘+@tbname+‘..sysobjects where xtype=‘‘U‘‘‘
 exec(@m_tbname)
 open #tb
 fetch next from #tb into @m_tbname
 while @@fetch_status=0
 begin
  set @sql=‘bcp ‘+@tbname+‘..‘+@m_tbname
   +case when @isout=1 then ‘ out ‘ else ‘ in ‘ end
   +‘ "‘+@filename+@m_tbname+‘.txt " /w‘
   +‘ /S ‘+@servername
   +case when isnull(@username,‘‘)=‘‘ then ‘‘ else ‘ /U ‘+@username end
   +‘ /P ‘+isnull(@password,‘‘)
  exec master..xp_cmdshell @sql
  fetch next from #tb into @m_tbname
 end
 close #tb
 deallocate #tb 
end
go


/************* Oracle **************/
EXEC sp_addlinkedserver ‘OracleSvr‘, 
   ‘Oracle 7.3‘, 
   ‘MSDAORA‘, 
   ‘ORCLDB‘
GO

delete from openquery(mailser,‘select *  from yulin‘)

select *  from openquery(mailser,‘select *  from yulin‘)

update openquery(mailser,‘select * from  yulin where id=15‘)set disorder=555,catago=888

insert into openquery(mailser,‘select disorder,catago from  yulin‘)values(333,777)

 

补充：

对于用bcp导出,是没有字段名的.

用openrowset导出,需要事先建好表.

用openrowset导入,除ACCESS及EXCEL外,均不支持非本机数据导入