cd ~/Work/ 
wget https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.18.6.tar.xz  
xz -d linux-3.18.6.tar.xz  
tar -xvf linux-3.18.6.tar 
cd linux-3.18.6  
make i386_defconfig  
make  
cd ~/Work/ 
mkdir rootfs  
git clone  https://github.com/mengning/menu.git # 话说这里为什么用MenuOS 我个人觉得老师一来是节约编译时间 二来也可以做做广告
cd menu
sudo apt-get install libc6:i386 lib32stdc++6 # 这两行安装非常有必要
sudo apt-get install lib32readline-gplv2-dev # 在64bit的Ubuntu环境下不能编译这个MenuOS的roofs 需要这些包来支持 即使用了-m32
gcc -o init linktable.c menu.c test.c -m32 -static -lpthread  
cd ../rootfs
cp ../menu/init ./  
find . | cpio -o -Hnewc |gzip -9 > ../rootfs.img  
cd ~/Work/ 
qemu -kernel linux-3.18.6/arch/x86/boot/bzImage -initrd rootfs.img
sudo apt-get install libncurses5-dev # 保证make menuconfig可用
make menuconfig
kernel hacking->
copile-time checks and compile options
[*] compile the kernel with debug info
qemu -kernel linux-3.18.6/arch/x86/boot/bzImage -initrd rootfs.img -s -S
# -S freeze CPU at startup (use ’c’ to start execution)
# -s shorthand for -gdb tcp::1234 若不想使用1234端口，则可以使用-gdb tcp:xxxx来取代-s选项

gdb
（gdb）file linux-3.18.6/vmlinux # 在gdb界面中targe remote之前加载符号表
（gdb）target remote:1234 # 建立gdb和gdbserver之间的连接,按c 让qemu上的Linux继续运行
（gdb）break start_kernel # 断点的设置可以在target remote之前，也可以在之后

asmlinkage __visible void __init start_kernel(void)
{
    //init_task即手工创建的PCB，0号进程即最终的idle进程
    set_task_stack_end_magic(&init_task);
    //初始化中断向量
    trap_init();
    //内存管理模块
    mm_init();

    /*
     * Set up the scheduler prior starting any interrupts (such as the
     * timer interrupt). Full topology setup happens at smp_init()
     * time - but meanwhile we still have a functioning scheduler.
     */
    sched_init();
    //内核启动时一直存在，0号进程创建了1进程和其他服务的内核的进程
    rest_init();
}

static noinline void __init_refok rest_init(void)
{
    int pid;

    rcu_scheduler_starting();
    /*
     * We need to spawn init first so that it obtains pid 1, however
     * the init task will end up wanting to create kthreads, which, if
     * we schedule it before we create kthreadd, will OOPS.
     */
    kernel_thread(kernel_init, NULL, CLONE_FS);    //创建新进程
    numa_default_policy();    
    //创建内核进程，管理系统资源
    pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
    rcu_read_lock();
    kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
    rcu_read_unlock();
    complete(&kthreadd_done);

    /*
     * The boot idle thread must execute schedule()
     * at least once to get things moving:
     */
    init_idle_bootup_task(current);
    schedule_preempt_disabled();
    /* Call into cpu_idle with preempt disabled */
    cpu_startup_entry(CPUHP_ONLINE);
}

if (ramdisk_execute_command) {
    ret = run_init_process(ramdisk_execute_command);
        if (!ret)
            return 0;
    pr_err("Failed to execute %s (error %d)\n",ramdisk_execute_command, ret);
}

pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
{
    return do_fork(flags|CLONE_VM|CLONE_UNTRACED, (unsigned long)fn,
        (unsigned long)arg, NULL, NULL);
}

static void cpu_idle_loop(void)
{
    while (1) {
        /*
         * If the arch has a polling bit, we maintain an invariant:
         *
         * Our polling bit is clear if we‘re not scheduled (i.e. if
         * rq->curr != rq->idle).  This means that, if rq->idle has
         * the polling bit set, then setting need_resched is
         * guaranteed to cause the cpu to reschedule.
         */

        __current_set_polling();
        tick_nohz_idle_enter();

        while (!need_resched()) {
            check_pgt_cache();
            rmb();

            if (cpu_is_offline(smp_processor_id()))
                arch_cpu_idle_dead();

            local_irq_disable();
            arch_cpu_idle_enter();

            /*
             * In poll mode we reenable interrupts and spin.
             *
             * Also if we detected in the wakeup from idle
             * path that the tick broadcast device expired
             * for us, we don‘t want to go deep idle as we
             * know that the IPI is going to arrive right
             * away
             */
            if (cpu_idle_force_poll || tick_check_broadcast_expired())
                cpu_idle_poll();
            else
                cpuidle_idle_call();

            arch_cpu_idle_exit();
        }

        /*
         * Since we fell out of the loop above, we know
         * TIF_NEED_RESCHED must be set, propagate it into
         * PREEMPT_NEED_RESCHED.
         *
         * This is required because for polling idle loops we will
         * not have had an IPI to fold the state for us.
         */
        preempt_set_need_resched();
        tick_nohz_idle_exit();
        __current_clr_polling();

        /*
         * We promise to call sched_ttwu_pending and reschedule
         * if need_resched is set while polling is set.  That
         * means that clearing polling needs to be visible
         * before doing these things.
         */
        smp_mb__after_atomic();

        sched_ttwu_pending();
        schedule_preempt_disabled();
    }
}