sqlserver 存储过程 try catch TRANSACTION (转)

标签：

CREATE PROCEDURE YourProcedure    
AS
BEGIN
    SET NOCOUNT ON;

    BEGIN TRY---------------------开始捕捉异常
       BEIN TRAN------------------开始事务
        UPDATE A SET A.names = B.names FROM 表1 AS A INNER JOIN 表2 AS B ON A.id = B.id

        UPDATE A SET A.names = B.names FROM 表1 AS A INNER JOIN 表2 AS B ON A.TEST = B.TEST

    COMMIT TRAN -------提交事务
    END TRY-----------结束捕捉异常
    BEGIN CATCH------------有异常被捕获
        IF @@TRANCOUNT > 0---------------判断有没有事务
        BEGIN
            ROLLBACK TRAN----------回滚事务
        END 
        EXEC YourLogErrorProcedure-----------执行存储过程将错误信息记录在表当中
    END CATCH--------结束异常处理
END

---------------------------------------------记录操作错信息的存储过程--------------------------------------------

CREATE PROCEDURE YourLogErrorProcedure
    @ErrorLogID [int] = 0 OUTPUT -- contains the ErrorLogID of the row inserted
AS                               -- by uspLogError in the ErrorLog table
BEGIN
    SET NOCOUNT ON;

    -- Output parameter value of 0 indicates that error 
    -- information was not logged
    SET @ErrorLogID = 0;

    BEGIN TRY
        -- Return if there is no error information to log
        IF ERROR_NUMBER() IS NULL
            RETURN;

        -- Return if inside an uncommittable transaction.
        -- Data insertion/modification is not allowed when 
        -- a transaction is in an uncommittable state.
        IF XACT_STATE() = -1
        BEGIN
            PRINT ‘Cannot log error since the current transaction is in an uncommittable state. ‘ 
                + ‘Rollback the transaction before executing uspLogError in order to successfully log error information.‘;
            RETURN;
        END

        INSERT [dbo].[OperateErrorLog] 
            (
            [OperateName], 
            [ErrorNumber], 
            [ErrorSeverity], 
            [ErrorState], 
            [ErrorProcedure], 
            [ErrorLine], 
            [ErrorMessage]
            ) 
        VALUES 
            (
            CONVERT(sysname, CURRENT_USER), 
            ERROR_NUMBER(),
            ERROR_SEVERITY(),
            ERROR_STATE(),
            ERROR_PROCEDURE(),
            ERROR_LINE(),
            ERROR_MESSAGE()
            );
        SET @ErrorLogID = @@IDENTITY;
    END TRY
    BEGIN CATCH
        PRINT ‘An error occurred in stored procedure uspLogError: ‘;
        EXECUTE YourPrintErrorProcedure;-----------------打印错误信息的存储过程
        RETURN -1;
    END CATCH
END;

CREATE PROCEDURE YourPrintErrorProcedure
AS
BEGIN
    SET NOCOUNT ON;

    -- Print error information. 
    PRINT ‘Error ‘ + CONVERT(varchar(50), ERROR_NUMBER()) +
          ‘, Severity ‘ + CONVERT(varchar(5), ERROR_SEVERITY()) +
          ‘, State ‘ + CONVERT(varchar(5), ERROR_STATE()) + 
          ‘, Procedure ‘ + ISNULL(ERROR_PROCEDURE(), ‘-‘) + 
          ‘, Line ‘ + CONVERT(varchar(5), ERROR_LINE());
    PRINT ERROR_MESSAGE();
END;

CREATE TABLE [dbo].[ErrorLog](
    [ErrorLogID] [int] IDENTITY(1,1) NOT NULL,
    [ErrorTime] [datetime] NOT NULL CONSTRAINT [DF_ErrorLog_ErrorTime]  DEFAULT (getdate()),
    [UserName] [sysname] COLLATE Chinese_PRC_CI_AS NOT NULL,
    [ErrorNumber] [int] NOT NULL,
    [ErrorSeverity] [int] NULL,
    [ErrorState] [int] NULL,
    [ErrorProcedure] [nvarchar](126) COLLATE Chinese_PRC_CI_AS NULL,
    [ErrorLine] [int] NULL,
    [ErrorMessage] [nvarchar](4000) COLLATE Chinese_PRC_CI_AS NOT NULL,
 CONSTRAINT [PK_ErrorLog_ErrorLogID] PRIMARY KEY CLUSTERED 
(
    [ErrorLogID] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]

本文来自CSDN博客，转载请标明出处：http://blog.csdn.net/WeiZhang_son_Ding/archive/2010/02/05/5291732.aspx

http://www.cnblogs.com/BpLoveGcy/archive/2010/03/22/1691407.html

1. ALTER PROC usp_AccountTransaction  
2.   
3.     @AccountNum INT,  
4.   
5.     @Amount DECIMAL  
6.   
7. AS  
8.   
9. BEGIN  
10.   
11.     BEGIN TRY --Start the Try Block..  
12.   
13.         BEGIN TRANSACTION -- Start the transaction..  
14.   
15.             UPDATE MyChecking SET Amount = Amount - @Amount  
16.   
17.                 WHERE AccountNum = @AccountNum  
18.   
19.             UPDATE MySavings SET Amount = Amount + @Amount  
20.   
21.                 WHERE AccountNum = @AccountNum  
22.   
23.         COMMIT TRAN -- Transaction Success!  
24.   
25.     END TRY  
26.   
27.     BEGIN CATCH  
28.   
29.         IF @@TRANCOUNT > 0  
30.   
31.             ROLLBACK TRAN --RollBack in case of Error  
32.   
33.         -- you can Raise ERROR with RAISEERROR() Statement including the details of the exception  
34.   
35.         --RAISERROR(ERROR_MESSAGE(), ERROR_SEVERITY(), 1)  
36.      

            DECLARE @ErrorMessage NVARCHAR(4000);
   　　　　DECLARE @ErrorSeverity INT;
  　　 DECLARE @ErrorState INT;

   　　SELECT 
    　　@ErrorMessage = ERROR_MESSAGE(),
    　　@ErrorSeverity = ERROR_SEVERITY(),
    　　@ErrorState = ERROR_STATE();

   -- Use RAISERROR inside the CATCH block to return error
   -- information about the original error that caused
   -- execution to jump to the CATCH block.
   　　RAISERROR (@ErrorMessage, -- Message text.
        　　@ErrorSeverity, -- Severity.
        　　@ErrorState -- State.
       　　 );

1.   
2.     END CATCH  
3.   
4. END  
5.   
6. GO  

1. BEGIN TRY  
2.   
3.     SELECT GETDATE()  
4.   
5.     SELECT 1/0--Evergreen divide by zero example!  
6.   
7. END TRY  
8.   
9. BEGIN CATCH  
10.   
11.     SELECT ‘There was an error! ‘ + ERROR_MESSAGE()  
12.   
13.     RETURN  
14.   
15. END CATCH;  

2.获得错误信息的函数表: 

下面系统函数在CATCH块有效.可以用来得到更多的错误信息:

•   BEGIN TRY  
•   
•     Try Statement 1  
•   
•     Try Statement 2  
•   
•     ...  
•   
•     Try Statement M  
•   
• END TRY  
•   
• BEGIN CATCH  
•   
•     Catch Statement 1  
•   
•     Catch Statement 2  
•   
•     ...  
•   
•     Catch Statement N  
•   
• END CATCH  

sqlserver 存储过程 try catch TRANSACTION (转)

标签：

原文地址：http://www.cnblogs.com/klsw/p/5453401.html