前言：
lvs-dr模型与之前的lvs-nat模型情况基本差不多，只是网络拓扑结构不同。
HostVS
OS：CentOS-7-x86_64
hostname:ws1
eno16777736: 10.0.0.60/8(DIP)
eno167777336:0: 10.0.0.61/32(VIP)
gateway:10.0.0.254
HostRS1
OS：CentOS-7-x86_64
hostname:ws2
eno16777736：10.0.0.101/8 (RIP1)
lo:0 10.0.0.61/32 (VIP)
gateway:10.0.0.254
HostRS2
OS：CentOS-7-x86_64
hostname:ws3
eno16777736：10.0.0.102/8(RIP2)
lo:0 10.0.0.61/32(VIP)
gateway:10.0.0.254
HostDB
OS：CentOS-7-x86_64
hostname:ws4
eno16777736: 10.0.0.202/8
gateway:10.0.0.254
时间同步：
# ntpdate cn.pool.ntp.org # hwclock --sysohc
安装软件：
HostDB
安装二进制mariadb-5.5.46
详细配置请入传送门：http://wscto.blog.51cto.com/11249394/1783131
安装NFS
# yum install -y nfs-utils
HostRS2
安装nginx，注意nginx属于epel源
# yum install-y nginx php-fpm php-mbstring php-mysql nfs-utils mariadb
HostRS1
安装nginx，注意nginx属于epel源
# yum install-y nginx php-fpm php-mbstring php-mysql nfs-utils mariadb
HostVS
安装LVS的cli接口程序ipvsadm
# yum install -y ipvsadm
配置集群
HostDB
配置mariadb
安全初始化完成后，创建discuz数据库和discuz用户，并授权其可远程操作数据库
# mysql_secure_installation # mysql -u root -p > create database discuz; > create user ‘discuz‘@‘lodalhost‘ identified by ‘123456‘; > grant all privileges on discuz.* to ‘discuz‘@‘%‘ identified by ‘123456‘; > flush privileges;
配置NFS
# mkdir /nfshare/ # ls -ld /nfshare/ drwxr-xr-x 2 root root 6 May 9 17:01 /nfshare/ # echo "/nfshare/ 10.0.0.101(rw,no_root_squash,async) 10.0.0.102(rw,no_root_squash,async)" > /etc/exports # /etc/init.d/rpcbind start Starting rpcbind: [ OK ] # /etc/init.d/nfs start Starting NFS services: [ OK ] Starting NFS quotas: [ OK ] Starting NFS mountd: [ OK ] Starting NFS daemon: [ OK ] Starting RPC idmapd: [ OK ] # chkconfig rpcbind on # chkconfig nfs on # chkconfig rpcbind --list rpcbind 0:off 1:off 2:on 3:on 4:on 5:on 6:off # chkconfig nfs --list nfs 0:off 1:off 2:on 3:on 4:on 5:on 6:off # showmount -e 127.0.0.1 Export list for 127.0.0.1: /nfshare/ 10.0.0.101,10.0.0.102
注意：rpcbind和nfs两个服务启动顺序不能更换，否则会出问题
解压discuz的程序包至/nfsshare/目录
# mkdir /nfshare/discuz # unzip /Discuz_X3.2_SC_UTF8.zip -d /nfshare/discuz/ # ls /nfshare/discuz/ readme upload utility
HostRS1
给RS配置VIP之前先要禁止RS响应VIP的ARP请求
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
在本地回环接口别名lo:0上配置VIP，并增添路由
ifconfig lo:0 10.0.0.61 broadcast 10.0.0.61 netmask 255.255.255.255 route add -host 10.0.0.61 dev lo:0
测试链接HostDB上的mariadb
# mysql -h 10.0.0.202 -u discuz -p
挂载HostDB上的NFS共享存储目录，属主属组修改为apache
# showmount -e 172.18.64.202 Export list for 172.18.64.202: /nfshare/ 10.0.0.101,10.0.0.102 # mkdir /htdocs # ls -ld /htdocs/ drwxr-xr-x 2 root root 6 May 9 17:05 /htdocs/ # mount -t nfs 172.18.64.202:/nfshare /htdocs # ls /htdocs/ discuz # chown -R apache:apache /htdocs/discuz/
启动php-fpm
# systemctl start php-fpm.service # ss -tnl | grep 9000
配置nginx的配置文件
# vim /etc/nginx/nginx.conf
server {
listen 80;
server_name ws2
# Load configuration files for the default server block.
include /etc/nginx/default.d/*.conf;
location / {
root /htdocs/discuz/upload;
index index.html index.htm index.php;
}
location ~ \.php$ {
root /htdocs/discuz/upload;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include /etc/nginx/fastcgi.conf;
}
error_page 404 /404.html;
location = /40x.html {
}
error_page 500 502 503 504 /50x.html;
location = /50x.html {
}
}
# nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
# nginx
# ss -tnl | grep 80
LISTEN 0 128 *:80 *:*测试访问discuz安装页面主机加上最后的/
# curl -I http://10.0.0.101/install/ HTTP/1.1 200 OK Server: nginx/1.6.3 Date: Mon, 09 May 2016 10:23:50 GMT Content-Type: text/html Connection: keep-alive X-Powered-By: PHP/5.4.16
HostRS2
配置同上
HostVS
原文地址：http://wscto.blog.51cto.com/11249394/1783969
