标签：java 线程 并发 基础 同步机制 synchronize
多个执行线程共享一个资源的情形是最常见的并发编程情景之一。在并发应用中常常遇到这样的情景：多个线程读或者写相同的数据，或者访问相同的文件或者数据库连接。为了防止这些共享资源可能出现错误或者数据不一致，人们引入了临界区（critical section）概念。临界区是一个用以访问共享资源的代码块，这个代码块中同一时间只允许一个线程执行。
为了实现这个临界区，Java提供了同步机制。当一个线程试图访问一个临界区时，它将使用一种同步机制来查看是不是已经有其他线程进入临界区。如果没有，它就进入临界区，如果有，他就被同步机制挂起，直到进入的线程离开临界区。如果在等待进入临界区的线程不止一个，JVM会选择其中的一个，其余将继续等待。
一、使用synchronized实现同步方法。如果一个对象已用synchronized关键字来生命，那么只有一个执行线程被允许访问它。如果其他线程试图访问这个对象的其他方法，它将被挂起，知道第一个线程执行完正在运行的方法。
也就是说，每一个用synchronized关键字声明的方法都是临界区。静态方法则有不同的行为。用synchronized关键字声明的静态方法，同时只能够被一个线程访问，但是其他线程可以访问这个对象的其他非静态方法。必须谨慎这一点。
package org.concurrency.synchronization;/**
* @author Administrator
* 银行账户模型
*/public class Account {
private double balance;//余额
public double getBalance() { return balance;
} public void setBalance(double balance) { this.balance = balance;
} /**
* 转账，使余额增加
* */
public synchronized void addAccount(double amount){ double tmp = balance;
System.out.printf("before_add_Account : Current Balance: %f\n",tmp); try {
Thread.sleep(10);
} catch (InterruptedException e) { // TODO Auto-generated catch block
e.printStackTrace();
}
tmp += amount; this.balance = tmp;
} /**
* 转出，使余额减少
* */
public synchronized void subtractAmount(double amount){ double tmp = balance;
System.out.printf("before_subtract_Account : Current Balance: %f\n",tmp); try {
Thread.sleep(10);
} catch (InterruptedException e) { // TODO Auto-generated catch block
e.printStackTrace();
}
tmp -= amount; this.balance = tmp;
System.out.printf("subtract_Account : Current Balance: %f\n",this.getBalance());
}
}package org.concurrency.synchronization;/**
* @author Administrator
* ATM模拟类
*/public class Bank implements Runnable {
private Account account;
public Bank(Account account) { super(); this.account = account;
} @Override
public void run() { // TODO Auto-generated method stub
for(int i = 0;i<10;i++){
account.subtractAmount(1000);
}
}
}package org.concurrency.synchronization;/**
* @author Administrator
* 公司模拟类
*/public class Company implements Runnable {
private Account account;
public Company(Account account) { super(); this.account = account;
} @Override
public void run() { // TODO Auto-generated method stub
for(int i = 0;i<10;i++){
account.addAccount(1000);
}
}
}package org.concurrency.synchronization;/**
* @author Administrator
* 线程启动类
*/public class Main {
public static void main(String[] args) { // TODO Auto-generated method stub
Account account = new Account();
account.setBalance(1000);
Company company = new Company(account);
Thread companyThread = new Thread(company);
Bank bank = new Bank(account);
Thread bankThread = new Thread(bank);
companyThread.start();
bankThread.start();
try {
companyThread.join();
bankThread.join();
System.out.printf("Account : Final Balance: %f\n",account.getBalance());
} catch (InterruptedException e) { // TODO Auto-generated catch block
e.printStackTrace();
}
}
}
运行结果：
before_add_Account : Current Balance: 1000.000000before_add_Account : Current Balance: 2000.000000before_add_Account : Current Balance: 3000.000000before_subtract_Account : Current Balance: 4000.000000subtract_Account : Current Balance: 3000.000000before_subtract_Account : Current Balance: 3000.000000subtract_Account : Current Balance: 2000.000000before_subtract_Account : Current Balance: 2000.000000subtract_Account : Current Balance: 1000.000000before_subtract_Account : Current Balance: 1000.000000subtract_Account : Current Balance: 0.000000before_subtract_Account : Current Balance: 0.000000subtract_Account : Current Balance: -1000.000000before_subtract_Account : Current Balance: -1000.000000subtract_Account : Current Balance: -2000.000000before_subtract_Account : Current Balance: -2000.000000subtract_Account : Current Balance: -3000.000000before_subtract_Account : Current Balance: -3000.000000subtract_Account : Current Balance: -4000.000000before_subtract_Account : Current Balance: -4000.000000subtract_Account : Current Balance: -5000.000000before_subtract_Account : Current Balance: -5000.000000subtract_Account : Current Balance: -6000.000000before_add_Account : Current Balance: -6000.000000before_add_Account : Current Balance: -5000.000000before_add_Account : Current Balance: -4000.000000before_add_Account : Current Balance: -3000.000000before_add_Account : Current Balance: -2000.000000before_add_Account : Current Balance: -1000.000000before_add_Account : Current Balance: 0.000000Account : Final Balance: 1000.000000在示例中使用了临时变量，故意制造了一个错误场景：tmp先获取账户余额，然后进行数额累加，最后把最终结果更新为账户余额。此外，通过Thread.sleep()方法增加了延时，使得正在执行的线程休眠，而此时其他线程也可能执行这个方法，因此可能会变更余额，引发错误。而synchronized关键字避免了这类错误的发生。
在没有synchronized关键字的情况下，一个线程读取了账户余额然后进入休眠，这个时候其他线程读取这个账户余额，最终这两个方法都将修改同一个余额，这将产生数据不一致，去除synchronized关键字，运行结果，最初和最后的金额不一致，并且多次运行，将获取多个不同的结果：
before_subtract_Account : Current Balance: 1000.000000 before_add_Account : Current Balance: 1000.000000 before_add_Account : Current Balance: 0.000000 subtract_Account : Current Balance: 0.000000 before_subtract_Account : Current Balance: 0.000000 subtract_Account : Current Balance: -1000.000000 before_subtract_Account : Current Balance: -1000.000000 before_add_Account : Current Balance: -1000.000000 before_add_Account : Current Balance: -2000.000000 subtract_Account : Current Balance: -2000.000000 before_subtract_Account : Current Balance: -2000.000000 before_add_Account : Current Balance: -1000.000000 subtract_Account : Current Balance: -1000.000000 before_subtract_Account : Current Balance: -1000.000000 before_add_Account : Current Balance: 0.000000 subtract_Account : Current Balance: -2000.000000 before_subtract_Account : Current Balance: -2000.000000 subtract_Account : Current Balance: 1000.000000 before_subtract_Account : Current Balance: 1000.000000 before_add_Account : Current Balance: 1000.000000 subtract_Account : Current Balance: 0.000000 before_subtract_Account : Current Balance: 0.000000 before_add_Account : Current Balance: 2000.000000 subtract_Account : Current Balance: -1000.000000 before_subtract_Account : Current Balance: -1000.000000 before_add_Account : Current Balance: 3000.000000 subtract_Account : Current Balance: -2000.000000 before_subtract_Account : Current Balance: -2000.000000 before_add_Account : Current Balance: 4000.000000 subtract_Account : Current Balance: -3000.000000 Account : Final Balance: 5000.000000
synchronized关键字会降低应用程序的性能，因此只能在并发情况中需要修改共享数据的方法上使用它。如果多个线程访问同一个synchronized方法，则只有一个线程可以访问，其他线程将等待。
可以递归调用被synchronized声明的方法。当线程访问一个对象的同步方法时，它还可调用这个对象的其他同步方法。
我们通过synchronized关键字来保护代码块的访问。应该这样利用synchronized关键字：方法的其余部分保持在synchronized代码块之外，以获取更好的性能。临界区（同一时间只能被一个线程访问的代码块）的访问应该尽可能的短。
二、使用非依赖属性实现同步。当使用synchronized关键字来保护代码块时，必须把对象引用作为传入参数。通常情况下，使用this关键字来引用执行方法所属对象。在类中有多个非依赖来属性，他们被多个线程共享，则必须同步每一个变量的访问，同一时刻只允许一个线程访问一个属性变量，其他线程访问令一个属性变量。下面实例将演示一个电影院售piao的场景。
package org.concurrency.synchronization;/**
* @author Administrator
* 电影院类
*/public class Cinema {
private long vacanciesCinema1; private long vacanciesCinema2;
private final Object controlCinema1; private final Object controlCinema2; public Cinema() {
controlCinema1 = new Object();
controlCinema2 = new Object();
vacanciesCinema1 = 20;
vacanciesCinema2 = 20;
}
/**
* 卖出piao
* */
public boolean selTickets1(int number){ synchronized (controlCinema1) { if(number <vacanciesCinema1){
vacanciesCinema1 -= number;
System.out.println("vacanciesCinema1：卖出"+number+"张"); return true;
}else{ return false;
}
}
} public boolean selTickets2(int number){ synchronized (controlCinema2) {
if(number <vacanciesCinema2){
vacanciesCinema2 -= number;
System.out.println("vacanciesCinema2：卖出"+number+"张"); return true;
}else{ return false;
}
}
} public boolean returnTickets1(int number){ synchronized (controlCinema1) {
vacanciesCinema1 += number;
System.out.println("vacanciesCinema1：退回"+number+"张"); return true;
}
} public boolean returnTickets2(int number){ synchronized (controlCinema2) {
vacanciesCinema2 += number;
System.out.println("vacanciesCinema2：退回"+number+"张"); return true;
}
} public long getVacanciesCinema1() { return vacanciesCinema1;
} public long getVacanciesCinema2() { return vacanciesCinema2;
}
}package org.concurrency.synchronization;/**
* @author Administrator
* 售piao处1
*/public class TicketOffice1 implements Runnable {
private Cinema cinema;
public TicketOffice1(Cinema cinema) { super(); this.cinema = cinema;
} @Override
public void run() { // TODO Auto-generated method stub
cinema.selTickets1(3);
cinema.selTickets1(2);
cinema.selTickets2(2);
cinema.returnTickets1(3);
cinema.selTickets1(5);
cinema.selTickets2(2);
cinema.selTickets2(2);
cinema.selTickets2(2);
}
}package org.concurrency.synchronization;/**
* @author Administrator
* 售piao处2
*/public class TicketOffice2 implements Runnable {
private Cinema cinema;
public TicketOffice2(Cinema cinema) { super(); this.cinema = cinema;
} @Override
public void run() { // TODO Auto-generated method stub
cinema.selTickets2(2);
cinema.selTickets2(4);
cinema.selTickets1(2);
cinema.selTickets1(1);
cinema.returnTickets2(2);
cinema.selTickets1(3);
cinema.selTickets2(2);
cinema.selTickets1(2);
}
}package org.concurrency.synchronization;/**
* @author Administrator
* 主程序
*/public class Main_Cinema {
public static void main(String[] args) { // TODO Auto-generated method stub
Cinema cinema = new Cinema();
TicketOffice1 ticketOffice1 = new TicketOffice1(cinema);
Thread thread1 = new Thread(ticketOffice1,"TicketOffice1");
TicketOffice2 ticketOffice2 = new TicketOffice2(cinema);
Thread thread2 = new Thread(ticketOffice2,"TicketOffice1");
thread1.start();
thread2.start();
try {
thread1.join();
thread2.join();
} catch (InterruptedException e) { // TODO Auto-generated catch block
e.printStackTrace();
}
System.out.printf("Room 1 Vacancies: %d\n",cinema.getVacanciesCinema1());
System.out.printf("Room 2 Vacancies: %d\n",cinema.getVacanciesCinema2());
}
}工作原理
用synchronized关键字保护代码块时，我们使用对象作为它的传入参数。JVM保证同一时间只有一个线程能够访问这个对象的代码保护块。这个例子使用了一个对象来控制对vacanciesCinema1属性的访问，所以同一时间只有一个线程能够修改这个属性；使用了另一个对象来控制vacanciesCinema2属性的访问，所以同一时间只有一个线程能够修改这个属性。但是，这个离职允许同事运行两个线程：一个修改vacanciesCinema1属性，另一个修改vacanciesCinema2属性。
运行结果总是如下：
vacanciesCinema1：卖出3张 vacanciesCinema2：卖出2张 vacanciesCinema2：卖出4张 vacanciesCinema1：卖出2张 vacanciesCinema1：卖出2张 vacanciesCinema2：卖出2张 vacanciesCinema1：卖出1张 vacanciesCinema2：退回2张 vacanciesCinema1：退回3张 vacanciesCinema1：卖出5张 vacanciesCinema2：卖出2张 vacanciesCinema1：卖出3张 vacanciesCinema2：卖出2张 vacanciesCinema2：卖出2张 vacanciesCinema1：卖出2张 vacanciesCinema2：卖出2张 Room 1 Vacancies: 5 Room 2 Vacancies: 6
三、在同步代码中使用条件
在并发编程中一个典型的问题就是生产者-消费者（Producer - Consumer）问题。我们有一个数据缓冲区，一个或多个数据生产者将把数据存入这个缓冲区，一个或多个数据消费者将数据从缓冲区取走。
这个缓冲区是一个共享数据结构，必须使用同步机制控制对它的访问，例如使用synchronized关键字，但是会受到更多的限制。如果缓冲区是满的，生产者就不能再放入数据，如果数据是空的，消费者就不能读取数据。
对这些场景，Java在Object类中提供了wait()、notify()和notifyAll()方法。线程可以在同步代码块中使用wait()方法。不能再同步代码块中调用wait()方法。当一个线程调用wait()方法时，JVM将这个线程置入休眠，并且释放控制这个同步代码块的对象，同时允许其他线程执行这个对象控制的其他同步代码块。为了唤醒这个线程，必须在这个对象控制的某个同步代码块儿中调用notify()或者notifyAll()方法。
package org.concurrency.synchronization.producer;import java.util.Date;import java.util.LinkedList;import java.util.List;public class EventStorage {
private int maxSize; private List<Date> storage; public EventStorage() {
maxSize = 0;
storage = new LinkedList<Date>();
}
public synchronized void set(){ while(storage.size() == maxSize){ try {
wait();
} catch (InterruptedException e) { // TODO Auto-generated catch block
e.printStackTrace();
}
}
storage.add(new Date());
System.out.printf("Set : %d",storage.size());
notifyAll();
}
public synchronized void get(){ while(storage.size() == 0){ try {
wait();
} catch (InterruptedException e) { // TODO Auto-generated catch block
e.printStackTrace();
}
}
System.out.printf("Get: %d: %s",storage.size(),((LinkedList<?>)storage).poll());
notifyAll();
}
}package org.concurrency.synchronization.producer;public class Producer implements Runnable {
private EventStorage storage;
public Producer(EventStorage storage) { super(); this.storage = storage;
} @Override
public void run() { // TODO Auto-generated method stub
for(int i = 0;i<10;i++){
storage.set();
}
}
}package org.concurrency.synchronization.producer;public class Producer implements Runnable {
private EventStorage storage;
public Producer(EventStorage storage) { super(); this.storage = storage;
} @Override
public void run() { // TODO Auto-generated method stub
for(int i = 0;i<10;i++){
storage.set();
}
}
}package org.concurrency.synchronization.producer;public class Consumer implements Runnable {
private EventStorage storage;
public Consumer(EventStorage storage) { super(); this.storage = storage;
} @Override
public void run() { // TODO Auto-generated method stub
for(int i = 0;i<10;i++){
storage.get();
}
}
}package org.concurrency.synchronization.producer;public class Main_Producer {
public static void main(String[] args) { // TODO Auto-generated method stub
EventStorage storage = new EventStorage();
Thread thread1 = new Thread(new Producer(storage));
Thread thread2 = new Thread(new Consumer(storage));
thread1.start();
thread2.start();
}
}四、使用锁实现同步
Java提供了基于Lock接口及其实现类的同步机制，它比synchronized关键字更强大也更灵活。
支持更灵活的同步代码块结构。使用synchronized关键字时，只能在同一个synchronized块结构中获取和释放控制。Lock接口允许实现更复杂的临界区结构（即控制的获取和释放不在同一个块结构中）
相比synchronized关键字，Lock借口提供了更多的功能。其中一个新功能是tryLock()方法的实现。这个方法试图获取锁，如果锁已经被其他线程获取，它将返回false并继续往下执行代码。
Lock接口允许分离读和写的操作，允许多个读线程和只有一个写线程
示例学习如何使用锁来同步代码，并且使用Lock接口和它的实现类--ReentrantLock类来创建一个临界区。
package org.concurrency.synchronization.lock;
import java.util.concurrent.locks.Lock;
import java.util.concurrent.locks.ReentrantLock;
/**
* @author kucs
* 创建一个打印队列类
*/
public class PrintQueue {
//声明一个锁对象
private final Lock queueLock = new ReentrantLock();
//实现打印方法printJob()
public void printJob(Object document){
//在打印方法内部，通过调用lock()方法获取对锁对象的控制
queueLock.lock();
//打印模拟文档
try {
Long duration = (long) (Math.random() * 10000);
System.out.println(Thread.currentThread().getName()+":"
+ "PrintQueue:Printing a Job during "+(duration/1000)+" seconds");
Thread.sleep(duration);
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
}finally{
//通过unlock()方法释放对锁对象的控制
queueLock.unlock();
}
}
}
package org.concurrency.synchronization.lock;
/**
* @author Administrator
* 创建打印工作类Job
*/
public class Job implements Runnable {
private PrintQueue printQueue;
public Job(PrintQueue printQueue) {
this.printQueue = printQueue;
}
@Override
public void run() {
// TODO Auto-generated method stub
System.out.printf("%s: Gong to print a document\n", Thread.currentThread().getName());
printQueue.printJob(new Object());
System.out.printf("%s: The document has been printed\n",Thread.currentThread().getName());
}
}
package org.concurrency.synchronization.lock;
public class Main {
public static void main(String[] args) {
// TODO Auto-generated method stub
PrintQueue printQueue = new PrintQueue();
Thread[] threads = new Thread[10];
for(int i = 0;i < threads.length;i++){
threads[i] = new Thread(new Job(printQueue));
}
for (Thread thread : threads) {
thread.start();
}
}
}运行结果：
Thread-0: Gong to print a document Thread-9: Gong to print a document Thread-6: Gong to print a document Thread-8: Gong to print a document Thread-7: Gong to print a document Thread-5: Gong to print a document Thread-4: Gong to print a document Thread-3: Gong to print a document Thread-2: Gong to print a document Thread-1: Gong to print a document Thread-0:PrintQueue:Printing a Job during 7 seconds Thread-9:PrintQueue:Printing a Job during 2 seconds Thread-0: The document has been printed Thread-9: The document has been printed Thread-6:PrintQueue:Printing a Job during 1 seconds Thread-6: The document has been printed Thread-8:PrintQueue:Printing a Job during 3 seconds Thread-8: The document has been printed Thread-7:PrintQueue:Printing a Job during 7 seconds Thread-7: The document has been printed Thread-5:PrintQueue:Printing a Job during 9 seconds Thread-4:PrintQueue:Printing a Job during 4 seconds Thread-5: The document has been printed Thread-4: The document has been printed Thread-3:PrintQueue:Printing a Job during 3 seconds Thread-3: The document has been printed Thread-2:PrintQueue:Printing a Job during 4 seconds Thread-2: The document has been printed Thread-1:PrintQueue:Printing a Job during 9 seconds Thread-1: The document has been printed
这个范例主要部分是打印队列PrintQueue中的PrintJob()方法。我们使用锁实现一个临界区，并且保证同一时间只有一个执行线程访问这个临界区时，必须创建ReentrantLock对象。在这个临界区的开始，必须通过lock()方法获取对锁的控制。当线程A访问这个方法时，如果没有其他线程获取对这个锁的控制，lock()方法将让线程A获得锁并且允许它立刻执行临界区代码。否则，如果其他线程B正在执行这个锁保护的临界区代码。lock()方法将让线程A休眠直到线程B执行完临界区代码
在线程离开临界区时，我们必须使用unlock()方法来释放它持有的锁，以让其他线程来访问临界区。如果在离开临界区的时候没有调用unlock()方法，其他线程将永远等待，从而导致死锁（DeadLock）情景。如果再临界区使用了try-catch块，不要忘记将unlock()方法放入finally部分。
Lock接口（和它的实现类ReentrantLock）还提供了另一种方法来获取锁，即tryLock()方法。跟lock()方法最大的不同是：线程使用tryLock()不能够获取锁，tryLock()会立即返回，它不会将线程置入睡眠。tryLock()方法返回一个布尔值，true表示线程获取了锁，false表示线程没有获取锁。
注意：tryLock()方法返回false，程序不会执行临界区代码，如果执行了，这样应用可能会出现错误的结果。
五、使用读写锁实现同步数据访问
锁机制最大的改进之一就是ReadWriteLock接口和它的唯一实现类ReentrantReadWriteLock。这个类有两个锁，一个是读操作锁，一个是写操作锁。使用读操作锁时可以允许多个线程同时访问。但是使用写操作锁时只允许一个线程进行。在一个线程执行写操作时，其他线程不能够执行读操作。
我们将通过范例来学习如何使用ReadWriteLock接口编程。这个范例将使用ReadWriteLock接口控制对价格对象的访问，价格对象存储了两个产品的价格。
package org.concurrency.synchronization.lock.readwritelock;
import java.util.concurrent.locks.ReadWriteLock;
import java.util.concurrent.locks.ReentrantReadWriteLock;
/**
* @author Administrator 价格信息类
*/
public class PriceInfo {
private double price1;
private double price2;
// 声明读写锁ReadWriteLock对象lock
private ReadWriteLock lock;
// 构造器初始化这3个属性
public PriceInfo() {
price1 = 1.0;
price2 = 2.0;
lock = new ReentrantReadWriteLock();
}
public double getPrice1() {
// 使用读锁来获取对这个属性的访问
lock.readLock().lock();
double value = price1;
lock.readLock().unlock();
return value;
}
public double getPrice2() {
// 使用读锁来获取对这个属性的访问
lock.readLock().lock();
double value = price2;
lock.readLock().unlock();
return value;
}
public void setPrices(double price1,double price2){
lock.writeLock().lock();
this.price1 = price1;
this.price2 = price2;
lock.writeLock().unlock();
}
}
package org.concurrency.synchronization.lock.readwritelock;
/**
* @author Administrator
* 读取价格信息类
*/
public class Reader implements Runnable {
private PriceInfo priceInfo;
public Reader(PriceInfo priceInfo) {
super();
this.priceInfo = priceInfo;
}
@Override
public void run() {
// TODO 循环读取两个价格10此
for(int i = 0;i<10;i++){
System.out.printf("%s: Reader: Price 1: %f\n",Thread.currentThread().getName(),priceInfo.getPrice1());
System.out.printf("%s: Reader: Price 2: %f\n",Thread.currentThread().getName(),priceInfo.getPrice2());
}
}
}
package org.concurrency.synchronization.lock.readwritelock;
/**
* @author Administrator
* 创建写入类Writer，修改价格信息
*/
public class Writer implements Runnable {
private PriceInfo priceInfo;
public Writer(PriceInfo priceInfo) {
super();
this.priceInfo = priceInfo;
}
@Override
public void run() {
// TODO 修改价格信息3次
for(int i = 0;i<3;i++){
System.out.printf("Writer: Attempt to modfy the price.\n");
priceInfo.setPrices(Math.random() * 10, Math.random() * 8);
System.out.printf("Writer: Prices have been modified.\n");
try {
Thread.sleep(2);
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
}
}
}
package org.concurrency.synchronization.lock.readwritelock;
public class Main {
public static void main(String[] args) {
// TODO Auto-generated method stub
PriceInfo priceInfo = new PriceInfo();
//创建5个读取类Reader对象
Reader[] readers = new Reader[5];
Thread[] threadReader = new Thread[5];
for(int i = 0;i<5;i++){
readers[i] = new Reader(priceInfo);
threadReader[i] = new Thread(readers[i]);
}
//创建1个写入类对象
Writer writer = new Writer(priceInfo);
Thread threadWriter = new Thread(writer);
//启动这6个线程
for (Thread thread : threadReader) {
thread.start();
}
threadWriter.start();
}
}运行结果截图：
Writer: Attempt to modfy the price. Thread-2: Reader: Price 1: 1.000000 Thread-1: Reader: Price 1: 1.000000 Thread-0: Reader: Price 1: 1.000000 Thread-4: Reader: Price 1: 1.000000 Thread-3: Reader: Price 1: 1.000000 Thread-4: Reader: Price 2: 2.636754 Thread-0: Reader: Price 2: 2.636754 Thread-1: Reader: Price 2: 2.636754 Thread-2: Reader: Price 2: 2.636754 Writer: Prices have been modified.
读操作锁通过ReadWriteLock接口的readLock()方法获取，这个锁实现了Lock接口，所以我们可以使用lock()，unlock()和tryLock()方法。写操作锁是通过ReadWriteLock接口的writeLock()方法获取的，这个锁同样实现了Lock接口
本文出自 “阿酷博客源” 博客，请务必保留此出处http://aku28907.blog.51cto.com/5668513/1786898
标签：java 线程 并发 基础 同步机制 synchronize
原文地址：http://aku28907.blog.51cto.com/5668513/1786898
