标签：
列出所有端口 netstat -a
# netstat -a | more
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:30037 *:* LISTEN
udp 0 0 *:bootpc *:*
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 6135 /tmp/.X11-unix/X0
unix 2 [ ACC ] STREAM LISTENING 5140 /var/run/acpid.socket
列出所有 tcp 端口 netstat -at
# netstat -at
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:30037 *:* LISTEN
tcp 0 0 localhost:ipp *:* LISTEN
tcp 0 0 *:smtp *:* LISTEN
tcp6 0 0 localhost:ipp [::]:* LISTEN
列出所有 udp 端口 netstat -au
# netstat -au
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
udp 0 0 *:bootpc *:*
udp 0 0 *:49119 *:*
udp 0 0 *:mdns *:*
只显示监听端口 netstat -l
# netstat -l
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:ipp *:* LISTEN
tcp6 0 0 localhost:ipp [::]:* LISTEN
udp 0 0 *:49119 *:*
只列出所有监听 tcp 端口 netstat -lt
# netstat -lt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:30037 *:* LISTEN
tcp 0 0 *:smtp *:* LISTEN
tcp6 0 0 localhost:ipp [::]:* LISTEN
只列出所有监听 udp 端口 netstat -lu
# netstat -lu
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
udp 0 0 *:49119 *:*
udp 0 0 *:mdns *:*
只列出所有监听 UNIX 端口 netstat -lx
# netstat -lx
Active UNIX domain sockets (only servers)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 6294 private/maildrop
unix 2 [ ACC ] STREAM LISTENING 6203 public/cleanup
unix 2 [ ACC ] STREAM LISTENING 6302 private/ifmail
unix 2 [ ACC ] STREAM LISTENING 6306 private/bsmtp
显示所有端口的统计信息 netstat -s
# netstat -s
Ip:
11150 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
11149 incoming packets delivered
11635 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
Tcp:
582 active connections openings
2 failed connection attempts
25 connection resets received
Udp:
1183 packets received
4 packets to unknown port received.
.....
显示 TCP 或 UDP 端口的统计信息 netstat -st 或 -su
# netstat -st
# netstat -su
netstat -p 可以与其它开关一起使用，就可以添加 “PID/进程名称” 到 netstat 输出中，这样 debugging 的时候可以很方便的发现特定端口运行的程序。
# netstat -pt
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 1 0 ramesh-laptop.loc:47212 192.168.185.75:www CLOSE_WAIT 2109/firefox
tcp 0 0 ramesh-laptop.loc:52750 lax:www ESTABLISHED 2109/firefox
当你不想让主机，端口和用户名显示，使用 netstat -n。将会使用数字代替那些名称。
同样可以加速输出，因为不用进行比对查询。
# netstat -an
如果只是不想让这三个名称中的一个被显示，使用以下命令
# netsat -a --numeric-ports
# netsat -a --numeric-hosts
# netsat -a --numeric-users
netstat 将每隔一秒输出网络信息。
# netstat -c
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 ramesh-laptop.loc:36130 101-101-181-225.ama:www ESTABLISHED
tcp 1 1 ramesh-laptop.loc:52564 101.11.169.230:www CLOSING
tcp 0 0 ramesh-laptop.loc:43758 server-101-101-43-2:www ESTABLISHED
tcp 1 1 ramesh-laptop.loc:42367 101.101.34.101:www CLOSING
^C
netstat --verbose
在输出的末尾，会有如下的信息
netstat: no support for `AF IPX‘ on this system.
netstat: no support for `AF AX25‘ on this system.
netstat: no support for `AF X25‘ on this system.
netstat: no support for `AF NETROM‘ on this system.
# netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth2
link-local * 255.255.0.0 U 0 0 0 eth2
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth2
注意： 使用 netstat -rn 显示数字格式，不查询主机名称。
并不是所有的进程都能找到，没有权限的会不显示，使用 root 权限查看所有的信息。
# netstat -ap | grep ssh
tcp 1 0 dev-db:ssh 101.174.100.22:39213 CLOSE_WAIT -
tcp 1 0 dev-db:ssh 101.174.100.22:57643 CLOSE_WAIT -
找出运行在指定端口的进程
# netstat -an | grep ‘:80‘
# netstat -i
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
eth0 1500 0 0 0 0 0 0 0 0 0 BMU
eth2 1500 0 26196 0 0 0 26883 6 0 0 BMRU
lo 16436 0 4 0 0 0 4 0 0 0 LRU
显示详细信息，像是 ifconfig 使用 netstat -ie:
# netstat -ie
Kernel Interface table
eth0 Link encap:Ethernet HWaddr 00:10:40:11:11:11
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Memory:f6ae0000-f6b00000
查看连接某服务端口最多的的IP地址
wss8848@ubuntu:~$ netstat -nat | grep "192.168.1.15:22" |awk ‘{print $5}‘|awk -F: ‘{print $1}‘|sort|uniq -c|sort -nr|head -20
18 221.136.168.36
3 154.74.45.242
2 78.173.31.236
2 62.183.207.98
2 192.168.1.14
2 182.48.111.215
2 124.193.219.34
2 119.145.41.2
2 114.255.41.30
1 75.102.11.99
TCP各种状态列表
wss8848@ubuntu:~$ netstat -nat |awk ‘{print $6}‘
established)
Foreign
LISTEN
TIME_WAIT
ESTABLISHED
TIME_WAIT
SYN_SENT
先把状态全都取出来,然后使用uniq -c统计，之后再进行排序。
wss8848@ubuntu:~$ netstat -nat |awk ‘{print $6}‘|sort|uniq -c
143 ESTABLISHED
1 FIN_WAIT1
1 Foreign
1 LAST_ACK
36 LISTEN
6 SYN_SENT
113 TIME_WAIT
1 established)
最后的命令如下:
netstat -nat |awk ‘{print $6}‘|sort|uniq -c|sort -rn
分析access.log获得访问前10位的ip地址
awk ‘{print $1}‘ access.log |sort|uniq -c|sort -nr|head -10
标签：
原文地址：http://www.cnblogs.com/legend-song/p/5580603.html
