每天一个Linux命令（46）ifconfig命令

时间：2016-06-13 18:58:14 阅读：433 评论：0 收藏：0 [点我收藏+]

标签：

在windows系统中，ipconfig命令行工具被用来获取网络接口配置信息并对此进行修改。Linux系统拥有一个类似的工具，也就是ifconfig(interfaces config)。

(1)用法:

用法: ifconfig [网络设备] [参数]

(2)功能:

功能: ifconfig命令用来查看和配置网络设备，当网络环境发生改变时可通过此命令对网络进行相应的配置。

注意: 用ifconfig命令配置的网卡信息，在网卡重启后机器重启后，配置就不存在。要想将上述的配置信息永远的存的电脑里，那就要修改网卡的配置文件了。

(3)选项参数:

1) up 　　　　　　启动指定网络设备/网卡。

2) down 　　　　关闭指定网络设备/网卡。该参数可以有效地阻止通过指定接口的IP信息流，如果想永久地关闭一个接口，我们还需要从核心路由表中将该接口的路由信息全部删除。

3) -a　　　　　　　　无论是否激活，显示所有配置的网络接口。

4) add 　　　　　　给指定网卡配置IPv6地址

　　5) del　　　　　　　　删除指定网卡的IPv6地址

6) arp|-arp　　　　　打开或关闭支持ARP协议

7) mtu<字节数> 　　设置网卡的最大传输单元

8) netmask<子网掩码> 设置网卡的子网掩码

(4)实例:

1)[sunjimeng@localhost ~]$ ifconfig　　　　　　　　

[sunjimeng@localhost ~]$ ifconfig 　　　　　　　　//未联网时的参数
eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 00:0c:29:4d:a3:cc  txqueuelen 1000  (Ethernet)
        RX packets 1914  bytes 174936 (170.8 KiB)
        RX errors 0  dropped 36  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 3246  bytes 281472 (274.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3246  bytes 281472 (274.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[sunjimeng@localhost ~]$ ifconfig                   //连接到有线网时的参数
eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500                //mtu表示最大传输单元
        inet 192.168.117.128  netmask 255.255.255.0  broadcast 192.168.117.255
        inet6 fe80::20c:29ff:fe4d:a3cc  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:4d:a3:cc  txqueuelen 1000  (Ethernet)
        RX packets 1969  bytes 181974 (177.7 KiB)
        RX errors 0  dropped 36  overruns 0  frame 0
        TX packets 48  bytes 6324 (6.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 3590  bytes 310452 (303.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3590  bytes 310452 (303.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

说明:

　　1）etn(Number)指的是网卡，可以看到目前这个网卡的物理地址(MAC地址）是 00:0c:29:4d:a3:cc。

2）inet后表示ip地址，此网卡的ip地址是192.168.117.128，广播地址是192.168.117.255，掩码地址为255.255.255.0。

3）lo是表示主机的回坏地址，这个一般是用来测试一个网络程序，但又不想让局域网或外网的用户能够查看，只能在此台主机上运行和查看所用的网络接口。

　　比如把 http服务器指定到回环地址，在浏览器输入127.0.0.1就能看到你所架WEB网站了。但只是您能看得到，局域网的其它主机或用户无从知道。

2)[root@localhost sunjimeng]# ifconfig eno16777736 down　　　　打开和关闭指定网卡

[sunjimeng@localhost ~]$ ifconfig eno16777736 down　　　　　　//必须是root权限才可以
SIOCSIFFLAGS: 不允许的操作
[sunjimeng@localhost ~]$ su root
密码：
[root@localhost sunjimeng]# ifconfig eno16777736 down
[root@localhost sunjimeng]# ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 3598  bytes 311224 (303.9 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3598  bytes 311224 (303.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
[root@localhost sunjimeng]# ifconfig eno16777736 up
[root@localhost sunjimeng]# ifconfig
eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 00:0c:29:4d:a3:cc  txqueuelen 1000  (Ethernet)
        RX packets 2013  bytes 185705 (181.3 KiB)
        RX errors 0  dropped 36  overruns 0  frame 0
        TX packets 88  bytes 9726 (9.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 3602  bytes 311520 (304.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3602  bytes 311520 (304.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

注意：ssh登陆linux服务器，关闭了网卡就不能开启了，除非你有多网卡。

3)[root@localhost sunjimeng]# ifconfig -a　　　　　　无论是否激活，显示所有配置的网络接口，不带参数的只显示已激活的网络接口

[root@localhost sunjimeng]# ifconfig -a
eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 00:0c:29:4d:a3:cc  txqueuelen 1000  (Ethernet)
        RX packets 2016  bytes 185981 (181.6 KiB)
        RX errors 0  dropped 36  overruns 0  frame 0
        TX packets 88  bytes 9726 (9.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 3602  bytes 311520 (304.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3602  bytes 311520 (304.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

4)启用或关闭支持ARP协议

[root@localhost sunjimeng]# ifconfig eno16777736 arp
[root@localhost sunjimeng]# ifconfig eno16777736 -arp

5)[root@localhost sunjimeng]# ifconfig eno16777736 mtu 2000　　　　设置网络设备传输的最大单元

[root@localhost sunjimeng]# ifconfig
eno16777736: flags=4291<UP,BROADCAST,RUNNING,NOARP,MULTICAST>  mtu 1500
        inet 192.168.117.128  netmask 255.255.255.0  broadcast 192.168.117.255
        inet6 fe80::20c:29ff:fe4d:a3cc  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:4d:a3:cc  txqueuelen 1000  (Ethernet)
        RX packets 75518  bytes 108412465 (103.3 MiB)
        RX errors 0  dropped 36  overruns 0  frame 0
        TX packets 20662  bytes 1263791 (1.2 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 4381  bytes 364888 (356.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 4381  bytes 364888 (356.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@localhost sunjimeng]# ifconfig eno16777736 mtu 2000
[root@localhost sunjimeng]# ifconfig
eno16777736: flags=4291<UP,BROADCAST,RUNNING,NOARP,MULTICAST>  mtu 2000
        ether 00:0c:29:4d:a3:cc  txqueuelen 1000  (Ethernet)
        RX packets 99762  bytes 145117330 (138.3 MiB)
        RX errors 0  dropped 36  overruns 0  frame 0
        TX packets 20663  bytes 1263851 (1.2 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 5243  bytes 424328 (414.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 5243  bytes 424328 (414.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

6)[root@localhost sunjimeng]# ifconfig eno16777736 hw ether 00:0c:29:4d:a3:dd　　　　设置网卡的mac地址

[root@localhost sunjimeng]# ifconfig
eno16777736: flags=4291<UP,BROADCAST,RUNNING,NOARP,MULTICAST>  mtu 2000
        inet 0.0.0.64  netmask 0.0.0.0  broadcast 255.255.255.255
        ether 00:0c:29:4d:a3:cc  txqueuelen 1000  (Ethernet)
        RX packets 109425  bytes 159195954 (151.8 MiB)
        RX errors 0  dropped 36  overruns 0  frame 0
        TX packets 20668  bytes 1264151 (1.2 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 33371  bytes 2821752 (2.6 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 33371  bytes 2821752 (2.6 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@localhost sunjimeng]# ifconfig eno16777736 hw ether 00:0c:29:4d:a3:dd
[root@localhost sunjimeng]# ifconfig
eno16777736: flags=4291<UP,BROADCAST,RUNNING,NOARP,MULTICAST>  mtu 2000
        inet 0.0.0.64  netmask 0.0.0.0  broadcast 255.255.255.255
        ether 00:0c:29:4d:a3:dd  txqueuelen 1000  (Ethernet)
        RX packets 109434  bytes 159196494 (151.8 MiB)
        RX errors 0  dropped 36  overruns 0  frame 0
        TX packets 20668  bytes 1264151 (1.2 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 34011  bytes 2876296 (2.7 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 34011  bytes 2876296 (2.7 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

每天一个Linux命令（46）ifconfig命令

标签：

原文地址：http://www.cnblogs.com/MenAngel/p/5581047.html

踩

(0)

评论一句话评论（0）

分享档案

更多>

2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)

周排行