file: 单个文件；不支持持久机制；
malloc: 缓存在内存中；
persistent：基于文件的持久存储；（此方式不建议使用）
写入文件，内容一个为on vs2，另一个为on vs3
[root@vs2 ~]# yum install http
[root@vs2 ~]# for i in {1..10}; do echo "web$i on vs2" > /var/www/html/test$i.html; done
[root@vs2 ~]# ls /var/www/html/
test10.html test2.html test4.html test6.html test8.html
test1.html test3.html test5.html test7.html test9.html
[root@vs2 ~]# systemctl start httpd.service[root@vs1 ~]# yum install varnish
[root@vs1 ~]# vim /etc/varnish/varnish.params # Varnish environment configuration description. This was derived from # the old style sysconfig/defaults settings # Set this to 1 to make systemd reload try to switch vcl without restart. RELOAD_VCL=1 # Main configuration file. You probably want to change it. VARNISH_VCL_CONF=/etc/varnish/default.vcl #读取vcl配置文件的位置 # Default address and port to bind to. Blank address means all IPv4 # and IPv6 interfaces, otherwise specify a host name, an IPv4 dotted # quad, or an IPv6 address in brackets. # VARNISH_LISTEN_ADDRESS=192.168.1.5 VARNISH_LISTEN_PORT=6081 #监听的服务端口为6081 # Admin interface listen address and port VARNISH_ADMIN_LISTEN_ADDRESS=127.0.0.1 #监听的管理地址为本机 VARNISH_ADMIN_LISTEN_PORT=6082 #监听的管理端口为6082 # Shared secret file for admin interface VARNISH_SECRET_FILE=/etc/varnish/secret #密钥文件位置 # Backend storage specification, see Storage Types in the varnishd(5) # man page for details. VARNISH_STORAGE="file,/var/lib/varnish/varnish_storage.bin,1G" #缓存以文件的方式的存储位置和大小 #VARNISH_STORAGE="malooc,256M" #以内存方式缓存，缓存大小为256M # Default TTL used when the backend does not specify one VARNISH_TTL=120 #联系后端服务器超时时长 # User and group for the varnishd worker processes VARNISH_USER=varnish #主进程所使用的用户 VARNISH_GROUP=varnish #主进程所使用的组 # Other options, see the man page varnishd(1) #进程选项，线程池的最大值最小值和超时时长 DAEMON_OPTS="-p thread_pool_min=5 -p thread_pool_max=500 -p thread_pool_timeout=300"
[root@vs1 ~]# varnishadm -S /etc/varnish/secret -T 127.0.0.1:6082 help help [<command>] #获取帮助信息 ping [<timestamp>] #测试服务器是否正常 auth <response> # quit #退出 banner status #显示服务器状态信息 start #启动子进程 stop #停止子进程 vcl.load <configname> <filename> #载入哪个文件为配置文件 vcl.inline <configname> <quoted_VCLstring> vcl.use <configname> #使用哪个vcl文件 vcl.discard <configname> #删除哪个vcl文件 vcl.list #列出所有可用的vcl文件 param.show [-l] [<param>] #显示运行时参数 param.set <param> <value> panic.show #显示恐慌信息，显示进程或子进程上次挂掉的原因 panic.clear #清除恐慌信息 storage.list #显示缓存信息 vcl.show [-v] <configname> #显示vcl文件的详细信息，vcl编译前的样子 backend.list [<backend_expression>] #显示后端服务器列表 backend.set_health <backend_expression> <state> #手动上线下线后端服务器 ban <field> <operator> <arg> [&& <field> <oper> <arg>]... #清理缓存中的缓存对象 ban.list #显示定义的清理缓存规则
varnish的访问日志
[root@vs1 ~]# varnishlog [root@vs1 ~]# varnishtop
varnish的统计信息
[root@vs1 ~]# varnishstat
http://book.varnish-software.com/4.0/chapters/VCL_Basics.html
http://book.varnish-software.com/4.0/_images/simplified_fsm.svg
vcl_recv 接收请求 cacheable 判断是否为可缓存对象 incache 判断hash后的结果是否存在 vcl_hash 可缓存对象hash计算 vcl_hit 缓存中命中 vcl_miss 缓存中未命中 vcl_fetch 获取后端内容 vcl_deliver 构建缓存发送 vcl_pipe 客户端请求的方法不是常见方法时，直接交给后端服务器处理 vcl_pass 不检查缓存直接从后端服务器取 vcl_error varnish直接返回错误响应
[root@vs1 ~]# cp /etc/varnish/default.vcl /etc/varnish/test.vcl
[root@vs1 ~]# vim /etc/varnish/test.vcl
# This is an example VCL file for Varnish.
#
# It does not do anything by default, delegating control to the
# builtin VCL. The builtin VCL is called when there is no explicit
# return statement.
#
# See the VCL chapters in the Users Guide at https://www.varnish-cache.org/docs/
# and http://varnish-cache.org/trac/wiki/VCLExamples for more examples.
# Marker to tell the VCL compiler that this VCL has been adapted to the
# new 4.0 format.
vcl 4.0;
# Default backend definition. Set this to point to your content server.
backend vs2 { #定义后端主机vs2
.host = "172.16.24.102";
.port = "80";
.probe = { #对后端主机的test1进行进行健康状态检测
.url = "/test1.html";
}
}
backend vs3 {
.host = "172.16.24.104";
.port = "80";
.probe = {
.url = "/test1.html";
}
}
#import directors; #加载directors模块，在负载均衡轮询时要用到
#sub vcl_init { #轮询方式的负载均衡
# new mycluster = directors.round_robin();
# mycluster.add_backend(vs2);
# mycluster.add_backend(vs3);
#}
sub vcl_recv {
# Happens before we check if we have this in cache already.
#
# Typically you clean up the request here, removing cookies you don‘t need,
# rewriting the request, etc.
#url中开头带有login或者admin的直接从后端主机取结果不缓存
if (req.url ~ "(?i)^/login" || req.url ~ "(?i)^/admin") {
return(pass);
}
#url以jpg,png,gif结尾的直接发给vs2，其他的都发给vs3
if (req.url ~ "(?i)\.(jpg|png|gif)$") {
set req.backend_hint = vs2;
} else {
set req.backend_hint = vs3;
}
# set req.backend_hint = mycluster.backend(); #负载均衡集群
#如果客户端请求为PRI返回405，如果请求的为非GET,HEAD,PUT,POST,TRACE,OPTIONS,DELETE都直接发给后端主机处理
if (req.method == "PRI") {
/* We do not support SPDY or HTTP/2.0 */
return (synth(405));
}
if (req.method != "GET" &&
req.method != "HEAD" &&
req.method != "PUT" &&
req.method != "POST" &&
req.method != "TRACE" &&
req.method != "OPTIONS" &&
req.method != "DELETE") {
/* Non-RFC2616 or CONNECT which is weird. */
return (pipe);
}
if (req.method != "GET" && req.method != "HEAD") {
/* We only deal with GET and HEAD by default */
return (pass);
}
if (req.http.Authorization || req.http.Cookie) {
/* Not cacheable by default */
return (pass);
}
return (hash);
}
sub vcl_backend_response {
# Happens after we have read the response headers from the backend.
#
# Here you clean the response headers, removing silly Set-Cookie headers
# and other mistakes your backend does.
}
sub vcl_deliver {
# Happens when we have all the pieces we need, and are about to send the
# response to the client.
#
# You can do accounting or modifying the final object here.
#如果缓存能命中就在返回值中插入HIT,未命中则插入MISS
if (obj.hits>0) {
set resp.http.X-Cache = "HIT";
} else {
set resp.http.X-Cache = "MISS";
}
}
[root@vs1 ~]# varnishadm -S /etc/varnish/secret -T 127.0.0.1:6082
vcl.load test2 test.vcl
200
VCL compiled.
vcl.use test2
200
VCL ‘test2‘ now active在vs2上上传一张dog.jpg，在vs3上不上传任何图片
本文出自 “信风” 博客，请务必保留此出处http://xsllqs.blog.51cto.com/2308669/1791225
原文地址：http://xsllqs.blog.51cto.com/2308669/1791225
