Jsvc安装,配置 常规用户使用tomcat的80端口

#!/bin/sh
# chkconfig 2345 90 15
# description Tomcat-en Manager
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# -----------------------------------------------------------------------------
# Commons Daemon wrapper script.
#
# $Id: daemon.sh 1202058 2011-11-15 06:37:12Z mturk $
# -----------------------------------------------------------------------------
#
# resolve links - $0 may be a softlink
JAVA_HOME=/usr/java/jdk1.7.0_79
CATALINA_HOME=/opt/apache-tomcat-7.0.69
DAEMON_HOME=$CATALINA_HOME/bin
TOMCAT_USER=op
CATALINA_BASE=$CATALINA_HOME
CATALINA_OPTS="-server -XX:MaxPermSize=512m -XX:MaxNewSize=512m -Xmx2048m"
proc="Tomcat 7.0.69" #注意这里的名字将会在启动或停止的时候显示（标识名称）
ARG0="$0"
while [ -h "$ARG0" ]; do
  ls=`ls -ld "$ARG0"`
  link=`expr "$ls" : ‘.*-> .∗$‘`
  if expr "$link" : ‘/.*‘ > /dev/null; then
    ARG0="$link"
  else
    ARG0="`dirname $ARG0`/$link"
  fi
done
DIRNAME="`dirname $ARG0`"
PROGRAM="`basename $ARG0`"
while [ ".$1" != . ]
do
  case "$1" in
    --java-home )
        JAVA_HOME="$2"
        shift; shift;
        continue
    ;;
    --catalina-home )
        CATALINA_HOME="$2"
        shift; shift;
        continue
    ;;
    --catalina-base )
        CATALINA_BASE="$2"
        shift; shift;
        continue
    ;;
    --catalina-pid )
        CATALINA_PID="$2"
        shift; shift;
        continue
    ;;
    --tomcat-user )
        TOMCAT_USER="$2"
        shift; shift;
        continue
    ;;
    * )
        break
    ;;
  esac
done
# OS specific support (must be ‘true‘ or ‘false‘).
cygwin=false;
darwin=false;
case "`uname`" in
    CYGWIN*)
        cygwin=true
        ;;
    Darwin*)
        darwin=true
        ;;
esac

# Use the maximum available, or set MAX_FD != -1 to use that
test ".$MAX_FD" = . && MAX_FD="maximum"
# Setup parameters for running the jsvc
#
test ".$TOMCAT_USER" = . && TOMCAT_USER=tomcat
# Set JAVA_HOME to working JDK or JRE
# If not set we‘ll try to guess the JAVA_HOME
# from java binary if on the PATH
#
if [ -z "$JAVA_HOME" ]; then
    JAVA_BIN="`which java 2>/dev/null || type java 2>&1`"
    test -x "$JAVA_BIN" && JAVA_HOME="`dirname $JAVA_BIN`"
    test ".$JAVA_HOME" != . && JAVA_HOME=`cd "$JAVA_HOME/.." >/dev/null; pwd`
else
    JAVA_BIN="$JAVA_HOME/bin/java"
fi

# Only set CATALINA_HOME if not already set
test ".$CATALINA_HOME" = . && CATALINA_HOME=`cd "$DIRNAME/.." >/dev/null; pwd`
test ".$CATALINA_BASE" = . && CATALINA_BASE="$CATALINA_HOME"
test ".$CATALINA_MAIN" = . && CATALINA_MAIN=org.apache.catalina.startup.Bootstrap
test ".$JSVC" = . && JSVC="$CATALINA_BASE/bin/jsvc"

# Ensure that any user defined CLASSPATH variables are not used on startup,
# but allow them to be specified in setenv.sh, in rare case when it is needed.
CLASSPATH=
if [ -r "$CATALINA_BASE/bin/setenv.sh" ]; then
  . "$CATALINA_BASE/bin/setenv.sh"
elif [ -r "$CATALINA_HOME/bin/setenv.sh" ]; then
  . "$CATALINA_HOME/bin/setenv.sh"
fi

# Add on extra jar files to CLASSPATH
test ".$CLASSPATH" != . && CLASSPATH="${CLASSPATH}:"
CLASSPATH="$CLASSPATH$CATALINA_HOME/bin/bootstrap.jar:$CATALINA_HOME/bin/commons-daemon.jar"

test ".$CATALINA_OUT" = . && CATALINA_OUT="$CATALINA_BASE/logs/catalina-daemon.out"
test ".$CATALINA_TMP" = . && CATALINA_TMP="$CATALINA_BASE/temp"

# Add tomcat-juli.jar to classpath
# tomcat-juli.jar can be over-ridden per instance
if [ -r "$CATALINA_BASE/bin/tomcat-juli.jar" ] ; then
  CLASSPATH="$CLASSPATH:$CATALINA_BASE/bin/tomcat-juli.jar"
else
  CLASSPATH="$CLASSPATH:$CATALINA_HOME/bin/tomcat-juli.jar"
fi
# Set juli LogManager config file if it is present and an override has not been issued
if [ -z "$LOGGING_CONFIG" ]; then
  if [ -r "$CATALINA_BASE/conf/logging.properties" ]; then
    LOGGING_CONFIG="-Djava.util.logging.config.file=$CATALINA_BASE/conf/logging.properties"
  else
    # Bugzilla 45585
    LOGGING_CONFIG="-Dnop"
  fi
fi

test ".$LOGGING_MANAGER" = . && LOGGING_MANAGER="-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager"
JAVA_OPTS="$JAVA_OPTS $LOGGING_MANAGER"

# Set -pidfile
test ".$CATALINA_PID" = . && CATALINA_PID="$CATALINA_BASE/logs/catalina-daemon.pid"

# Increase the maximum file descriptors if we can
if [ "$cygwin" = "false" ]; then
    MAX_FD_LIMIT=`ulimit -H -n`
    if [ "$?" -eq 0 ]; then
        # Darwin does not allow RLIMIT_INFINITY on file soft limit
        if [ "$darwin" = "true" -a "$MAX_FD_LIMIT" = "unlimited" ]; then
            MAX_FD_LIMIT=`/usr/sbin/sysctl -n kern.maxfilesperproc`
        fi
        test ".$MAX_FD" = ".maximum" && MAX_FD="$MAX_FD_LIMIT"
        ulimit -n $MAX_FD
        if [ "$?" -ne 0 ]; then
            echo "$PROGRAM: Could not set maximum file descriptor limit: $MAX_FD"
        fi
    else
        echo "$PROGRAM: Could not query system maximum file descriptor limit: $MAX_FD_LIMIT"
    fi
fi

# ----- Execute The Requested Command -----------------------------------------
case "$1" in
    run     )
      shift
      "$JSVC" $*       -java-home "$JAVA_HOME"       -pidfile "$CATALINA_PID"       -wait 10       -nodetach       -outfile "&1"       -errfile "&2"       -classpath "$CLASSPATH"       "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS       -Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS"       -Dcatalina.base="$CATALINA_BASE"       -Dcatalina.home="$CATALINA_HOME"       -Djava.io.tmpdir="$CATALINA_TMP"       -Dfile.encoding="UTF-8"       $CATALINA_MAIN
      echo -n "start $proc success."
      exit $?
    ;;
    start   )
      "$JSVC"       -java-home "$JAVA_HOME"       -user $TOMCAT_USER       -pidfile "$CATALINA_PID"       -wait 10       -outfile "$CATALINA_OUT"       -errfile "&1"       -classpath "$CLASSPATH"       "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS       -Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS"       -Dcatalina.base="$CATALINA_BASE"       -Dcatalina.home="$CATALINA_HOME"       -Djava.io.tmpdir="$CATALINA_TMP"       -Dfile.encoding="UTF-8"       $CATALINA_MAIN
      echo -n "start $proc success."
      exit $?
    ;;
    stop    )
      "$JSVC" $JSVC_OPTS       -stop       -pidfile "$CATALINA_PID"       -classpath "$CLASSPATH"       -Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS"       -Dcatalina.base="$CATALINA_BASE"       -Dcatalina.home="$CATALINA_HOME"       -Djava.io.tmpdir="$CATALINA_TMP"       $CATALINA_MAIN
      echo -n "Stop $proc success."
      exit $?
    ;;
    version  )
      "$JSVC"       -java-home "$JAVA_HOME"       -pidfile "$CATALINA_PID"       -classpath "$CLASSPATH"       -errfile "&2"       -version       -check       $CATALINA_MAIN
      if [ "$?" = 0 ]; then
        "$JAVA_BIN"         -classpath "$CATALINA_HOME/lib/catalina.jar"         org.apache.catalina.util.ServerInfo
      fi
      exit $?
    ;;
    *       )
      echo "Unknown command: \`$1‘"
      echo "Usage: $PROGRAM ( commands ... )"
      echo "commands:"
      echo "  run               Start Tomcat without detaching from console"
      echo "  start             Start Tomcat"
      echo "  stop              Stop Tomcat"
      echo "  version           What version of commons daemon and Tomcat"
      echo "                    are you running?"
      exit 1
    ;;
esac