标签:
方法一、LR + SiteScope
方法二、使用rstatd包
1、下载rpc.rstatd-4.0.1.tar.gz
2、解压缩
tar -zxvf rpc.rstatd-4.0.1.tar.gz
3、配置
./configure
4、编译
make
5、安装
make install
6、启动
rpc.rstatd
7、在LoadRunner中添加计数器
average load :在过去的1分钟,的平均负载
cpu utilization: cpu的使用率
disk traffic: disk传输率
paging rate: 每秒从磁盘读到物理内存,或者从物理内存写到页面文件的内存页数
Swap-in rate: 每秒交换到内存的进程数
Swap-out rate: 每秒从内存交换出来的进程
8、将服务设置为自动启动(Linux启动时自动启动这些服务):
vi /etc/rc.d/rc.local
如:
#rpc.rstatd--绝对路径
/usr/local/sbin/rpc.rstatd
方法3、使用Shell脚本
使用Shell脚本收集Linux资源写入csv文件,再通过LR的Analysis导入csv文件(Tools - Extenal Monitors - Import Data... )
Shell脚本如下所示:
#!/bin/bash
# (C) 2006 Mark Boddington, http://www.badpenguin.co.uk
# Licensed under the GNU GPL Version 2.
# ***** Version 0.2 *****
# TODO -- Create CSV parsing rules for the netstat.
# ***** Configuration *****
# set LOG to the directory you want to write the performance data to.
# set SLEEP to the number of seconds you want to sleep between samples
# set HDD to the number of had disks in your machine.
LOG=/home/mark/PerfMon/LIVE
SLEEP=10
HDD=2
HTYPE=$(uname -s)
genStat()
{
now=$( date +%S )
while [ "$now" -ne "30" ]
do
sleep 1
now=$( date +%S )
done
while :;
do
dat=$(date +%Y%m%d,%H:%M:%S)
day=$(date +%Y%m%d )
iostat -x 1 2 | sed -e"s/^/(.*/)/$dat /1/" | grep "[0-9]/." | tail -${HDD} >> ${LOG}/io.${day}.log &
vmstat 1 2 | awk "{ print /"$dat/", /$0 }" | tail -1 >> ${LOG}/vm.${day}.log &
netstat -i | grep -v Iface | awk "{ print /"$dat/", /$0 }" >> ${LOG}/netstat.${day}.log &
uptime >> ${LOG}/uptime.${day}.log &
sleep $SLEEP
done
}
mkcsv()
{
dat=$1
if [ "$HTYPE" == "SunOS" ]
then
#IO CSV
echo date,time,device,r/s,w/s,kr/s,kw/s,wait,actv,wsvc_t,asvc_t,%w,%b > ${LOG}/io.${dat}.csv
cat ${LOG}/io.${dat}.log | egrep -v "extended|device" | awk ‘{ OFS=","; print $1,$12,$2,$3,$4,$5,$6,$7,$8,$9,$10,$11 }‘ >> ${LOG}/io.${dat}.csv
#VM csv
echo date,time,k[r],k[b],k[w],swap,free,pg[re],pg[mf],pg[pi],pg[po],pg[fr],pg[de],pg[sr],m0,m1,m2,m1,interupt,syscall,ctxswt,cpu[us],cpu[sys],cpu[idl] > ${LOG}/vm.${dat}.csv
cat ${LOG}/vm.${dat}.log | awk ‘{for(l=1;l<23;l++) { printf("%s,", $l) }; print $23 }‘ >> ${LOG}/vm.${dat}.csv
#uptime csv
echo time,users,5min,10min,15min > ${LOG}/uptime.${dat}.csv
cat ${LOG}/uptime.${dat}.log | awk ‘{ OFS=","; if ( $6 ~ /^[hm][ri]/) { print $1,$7,$11$12$13 } else if ( $6 ~/^user/) { print $1,$5,$9$10$11} else { print $1,$6,$10$11$12} }‘ >> ${LOG}/uptime.${dat}.csv
elif [ "$HTYPE" == "Linux" ]
then
#IO CSV
echo "date,time,device,rrqm/s,wrqm/s,r/s,w/s,rsec/s,wsec/s,rkB/s,wkB/s,avgrq-sz,avgqu-sz,await,svctm,%util" > ${LOG}/io.${dat}.csv
cat ${LOG}/io.${dat}.log | egrep -v "extended|device" | awk ‘{for(l=1;l<15;l++) { printf("%s,", $l) }; print $15}‘ >> ${LOG}/io.${dat}.csv
#VM csv
echo date,time,r,b,swp,free,buff,cache,si,so,bi,bo,in,cs,us,sy,id,wa > ${LOG}/vm.${dat}.csv
cat ${LOG}/vm.${dat}.log | awk ‘{for(l=1;l<17;l++) { printf("%s,", $l) }; print $17 }‘ >> ${LOG}/vm.${dat}.csv
#uptime csv
echo time,users,5min,10min,15min > ${LOG}/uptime.${dat}.csv
cat ${LOG}/uptime.${dat}.log | awk ‘{ OFS=","; if ( $4 ~ /^min/) { print $1,$5,$9$10$11 } else { print $1,$4,$8$9$10} }‘ >> ${LOG}/uptime.${dat}.csv
else
echo "Hmmm - An unexpected error occured. Have you change the host type?"
fi
}
if [ "$HTYPE" != "SunOS" -a "$HTYPE" != "Linux" ]
then
echo "Error - This script has no knowlege of the System $HTYPE"
echo " You will need to do some tweaking."
exit
fi
case $1 in
run)
genStat
;;
csv)
if [ $# -lt 2 ]
then
echo "Error - You must supply a date in the form YYYYMMDD"
exit
fi
mkcsv $2
;;
*)
echo -e ":::: Usage ::::"
echo -e "$0 run : Collect stats"
echo -e "$0 csv YYYYMMDD : Generate CSV from stats"
echo ""
;;
esac
参考:
http://www.loadrunnertnt.com/tools/local-unix-monitoring-made-possible/
http://www.badpenguin.co.uk/main/content/view/43/35/
标签:
原文地址:http://www.cnblogs.com/hushaojun/p/5651570.html