nginx正常只能代理http请求，如果想实现代理websocket的需求，需在请求中加入"Upgrade"字段，使请求从http升级为websocket。
配置如下：
http {
map $http_upgrade $connection_upgrade {
default upgrade;
‘‘ close;
}
server {
...
location /chat/ {
proxy_pass http://backend;
proxy_http_version 1.1;
#以下配置添加代理头部：
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection $connection_upgrade;
}
}实验案例：
配置websockeet服务器，客户端通过代理连接服务器端。环境如下：
websocket服务端：192.168.1.110:8010
nginx ：192.168.1.131:8081
1：利用nodejs实现一个websocket服务端，监听8010端口，等待websocket链接。
安装nodejs与npm，并安装ws模块。（这里通过官网程序包实现）
[root@192_168_1_110 ~]# tar -zxvf node-v6.2.0-linux-x64.tar.gz [root@192_168_1_110 ~]# ln -s /root/node-v6.2.0-linux-x64/bin/node /usr/local/bin/node [root@192_168_1_110 ~]# ln -s /root/node-v6.2.0-linux-x64/bin/node /usr/local/bin/node [root@192_168_1_110 ~]# npm install -g ws [root@192_168_1_110 ~]# npm install -g wscat
编写websocket服务监听程序：
[root@192_168_1_110 ~]# vim server.js
console.log("Server started");
var Msg = ‘‘;
var WebSocketServer = require(‘ws‘).Server
, wss = new WebSocketServer({port: 8010});
wss.on(‘connection‘, function(ws) {
ws.on(‘message‘, function(message) {
console.log(‘Received from client: %s‘, message);
ws.send(‘Server received from client: ‘ + message);
});
}); 启动websocket服务端：
[root@192_168_1_110 ~]# node server.js Server started
重新开启一个终端，使用wscat程序测试程序连接：
[root@192_168_1_110 ~]# /root/node-v6.2.0-linux-x64/lib/node_modules/wscat/bin/wscat --connect ws://192.168.1.110:8010 connected (press CTRL+C to quit) > This is a websocket test... < Server received from client: This is a websocket test... >
查看服务端：
[root@192_168_1_110 ~]#node server.js Server started Received from client: This is a websocket test... ----从客户端接收到的信息
至此，websocket环境搭建完成。
2：配置nginx，代理110上的websocket链接。
[root@192_168_1_131 ~]# vim /opt/conf/nginx/nginx.conf
......
http {
......
map $http_upgrade $connection_upgrade {
default upgrade;
‘‘ close;
}
.......
include vhost/*.conf;
[root@192_168_1_131 ~]# vim /opt/conf/nginx/vhost/nodejs.conf
upstream nodejs{
server 192.168.1.110:8010;
}
server {
listen 8010;
access_log /opt/logs/nginx/nodejs.log main;
location / {
proxy_pass http://nodejs;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection $connection_upgrade;
}
}重新加载nginx配置：
[root@192_168_1_131 ~]# service nginx reload
这样配置过后，在nginx服务器上访问8010端口的请求，将会全部发送到后端192.168.1.110的8081端口上。
3：验证websocket请求代理：（把ws地址指向192.168.1.131:8010）
[root@192_168_1_110 ~]# /root/node-v6.2.0-linux-x64/lib/node_modules/wscat/bin/wscat --connect ws://192.168.1.131:8010 connected (press CTRL+C to quit) > This is a websocket test through nginx proxying... < Server received from client: This is a websocket test through nginx proxying... >
查看服务端：
[root@192_168_1_110 ~]#node server.js Server started Received from client: This is a websocket test... Received from client: This is a websocket test through nginx proxying...
可以看到通过代理，websocket也能正常接收到客户端的请求信息。
本文出自 “扮演上帝的小丑” 博客，转载请与作者联系！
原文地址：http://icenycmh.blog.51cto.com/4077647/1839566
