标签：
1、环境
Master1 192.168.1.135
Master2 192.168.1.136
Client 192.168.1.137
2、Master1操作授权
mysql->grant replication slave on *.* to ‘admin‘@‘192.168.1.136‘ identified by ‘aixocm‘; 授权操作
mysql->flush privileges; 刷新权限
mysql->show master status\G; 查看此时的binlog日志文件名和pos号
3、Master2操作授权
mysql->grant replication slave on *.* to ‘backup‘@‘192.168.1.135‘ identified by ‘aixocm‘; 授权操作
mysql->flush privileges; 同上
mysql->show master status\G; 同上
4、主1-135上操作
mysql->stop slave;
mysql->change master to master_host=‘192.168.1.136‘, master_user=‘backup‘, master_password=‘aixocm‘, master_log_file=‘mysql-bin.000006‘,master_log_pos=411; 这里的文件名和pos号就是上面Master1查看的具体内容
mysql->start slave;
mysql->show slave status\G;
开启复制功能之后，如果你能看到Slave_IO_Runing:和slave_SQL_Running:这两个都显示yes，表示复制功能开启正常，缺一不可
5、主2-136上操作
mysql->stop slave;
mysql->change master to master_host=‘192.168.1.135‘, master_user=‘admin‘, master_password=‘aixocm‘, master_log_file=‘mysql-bin.000002‘,master_log_pos=242;
mysql->start slave;
mysql->show slave status\G;
这里和上面的原理一致，就不累述了
6、主135 和136同时安装keepalived
这是keepalived的官方网站:www.keepalived.org
# tar -xvf keepalived-1.1.20.tar.gz
# cd keepalived-1.1.20
#./configure --prefix=/usr/local/keepalived
#yum install openssl* 如果没有安装openssl请安装
# make && make install
# cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/ 移动启动脚本
# cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
# mkdir /etc/keepalived
# cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/ 复制配置文件
# cp /usr/local/keepalived/sbin/keepalived /usr/sbin/ 修改可执行二进制文件路径
7、在Master上对keepalived配置文件进行相关配置
! Configuration File for keepalived
global_defs {
notification_email {
acassen@firewall.loc
failover@firewall.loc
sysadmin@firewall.loc
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id master #此处填本机的主机名
}
vrrp_script check_mysqld {
script "/etc/keepalived/mysqlcheck/check_mysql.sh" #检查MYSQL 复制状态脚本
interval 2
weight 2
}
vrrp_instance VI_1 {
state BACKUP #这里主135和主136都写上BACKUP
interface eth0 #vip对外的网络接口
virtual_router_id 80 #标识号，主主要统一起来
priority 100 #优先级，越大优先级越高，主136上改成90
advert_int 2
nopreempt #不抢占模式，在优先级高的那台设置此参数
authentication {
auth_type PASS
auth_pass 1111
}
track_script {
check_mysqld #调用MYSQL脚本的函数
}
virtual_ipaddress {
192.168.1.200 dev eth0 ；设置vip，即虚拟ip地址，我的是在eth0网卡上
}
}
当Master1 down了，Master2接管了，Master1再次起来了，不会再成为master,也就是说不会再次抢占VIP。
否则master恢复了再接管的话,如果出现问题了，则切换两次对业务来说并不好。
解决方法是:
state 都设置为Backup,在优先级高的那台设置参数nopreempt.
同样，还要在在Maste2配置该文件，需要修改主机名，优先级等参数。
8、监控MYSQL 复制状态的脚本，在Master1上，脚本位置在keepalived配置文件上有记录。
#!/bin/bash
#function:监视mysql主从服务器状态
#written by:alec
user=admin
host=192.168.1.135
password=aixocm
check_mysql() {
IO=`/usr/local/mysql/bin/mysql -u$user -p$password -h$host -e ‘show slave status\G‘|grep IO_Running|tr -s ‘ ‘|awk ‘{print $2}‘|grep Yes|wc -l`
SQL=`/usr/local/mysql/bin/mysql -u$user -p$password -h$host -e ‘show slave status\G‘|grep SQL_Running|tr -s ‘ ‘|sed -n ‘1p‘|awk ‘{print $2}‘|grep Yes|wc -l`
if [ "$IO" -eq 1 ]&&[ "$SQL" -eq 1 ]
then
service keepalived status|grep pid
if [ $? -eq 0 ]
then
echo "服务已经启动"
else
service keepalived start
if [ $? -eq 0 ]
then
echo "服务启动成功"
else
echo "服务启动失败"
fi
fi
else
service keepalived status|grep pid
if [ $? -eq 0 ]
then
service keepalived stop
if [ $? -eq 0 ]
then
echo "服务关闭成功"
else
echo "服务关闭失败"
fi
else
echo "服务已经关闭"
fi
fi
}
main(){
check_mysql
}
main;
同样，在Master2上也需要该监控脚本，监控脚本需要能够登陆到本地mysql的用户名和密码，在Master2上只需修改用户名，主机名和密码。需要注意的是，需要给脚本加上可执行的权限。
9、在Master1和Master2上远程授权VIP登陆用户
>grant all on *.* to test@‘%‘ identified by ‘aixocm‘;
拥有VIP地址的主机才是真正对外提供服务主机，远程用户通过VIP连接到真实的服务器上来
/etc/init.d/keepalived start ；两台主机都启动keepalived这个服务
VIP会首先出现在优先级高的Master1上，如下图所示:
10 最后测试
用客户机登录服务器，让拥有VIP的那台服务器也就是Master1宕机，我们这里只需要停止slave复制功能即可。
# mysql –utest –paixocm –h192.168.1.200 –P 3306
# stop slave;
# quit;
然后此时在查看ip地址，VIP这时候应该是没有了的，跑到Master2下查看VIP地址，如果能够看到VIP地址，说明你成功了，如下图:
基于主主复制的mysql双机热备+keepalived实现高可用性
标签：
原文地址：http://www.cnblogs.com/alec1312/p/alec1312.html
