Keepalived概述:
Keepalived的作用是检测服务器的状态，如果有一台web服务器死机，或工作出现故障，Keepalived将检测到，并将有故障的服务器从系统中剔除，同时使用其他服务器代替该服务器的工作，当服务器工作正常后Keepalived自动将服务器加入到服务器群中，这些工作全部自动完成，不需要人工干涉，需要人工做的只是修复故障的服务器.
keepalived实现lvs高可用并负载均衡web服务：
准备工作:
2台keepalived节点为: node1.samlee.com node2.samlee.com
2台realserver服务为: node3.samlee.com node4.samlee.com
1、配置RSserver过程如下(node3.samlee.com\node4.samlee.com):
(1)部署web服务(使用nginx配置)
# yum -y install nginx-1.10.0-1.el6.ngx.x86_64.rpm
(2)禁用防火墙及主机名修改
# service iptables stop # chkconfig iptables off
(3)配置路由转发及转发模块配置
# echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce # echo 2 > /proc/sys/net/ipv4/conf/eth0/arp_announce # echo 1 > /proc/sys/net/ipv4/conf/eth0/arp_ignore # echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore --添加路由条目 # ifconfig lo:0 172.16.100.99 netmask 255.255.255.255 broadcast 172.16.100.99 up # route add -host 172.16.100.99 dev lo:0
2、配置keepalived服务器
(1)安装ipvsadm负载均衡管理器
# yum -y install ipvsadm
(2)安装keepalived
# yum -y install keepalived # chkconfig keepalived on
(3)配置keepalived默认初始状态如下:(主节点:master状态)
# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
root@localhost
}
notification_email_from root@localhost
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id LVS_DEVEL #物理路由id，一般指定为本机的hostname
}
vrrp_instance VI_1 { #vrrp实例配置段
state MASTER #指定keepalived服务运行状态
interface eth0 #指定keepalived的心跳口
virtual_router_id 51 #指定虚拟路由id（1~255），同一vrrp实例的主备keepalived必须配置为一样
priority 101 ##指定起始优先级，优先级高的会成为master
advert_int 1 #vrrp通告的发送间隔
authentication { #配置通过密码认证
auth_type PASS
auth_pass keepalivedpass
}
virtual_ipaddress {
172.16.100.99 dev eth0 label eth0:0 #定义VIP
}
}(4)配置keepalived默认初始状态如下:(备节点:backuo状态)
# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
root@localhost
}
notification_email_from root@localhost
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
vrrp_instance VI_1 {
state BACKUP
interface eth0
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass keepalivedpass
}
virtual_ipaddress {
172.16.100.99 dev eth0 label eth0:0
}
}(5)调用周期性检测down文件是否存在来控制keepalived服务的主备切换
在keepalived.conf添加如下内容:
全局配置的段下添加如下:
vrrp_script chk_downfile { #服务状态检测脚本配置段
script "[[ -f /etc/keepalived/down ]] && exit 1 || exit 0" #通过周期性检测down文件是否存在来控制keepalived服务的主备切换
interval 1 #指定检测间隔为1秒
weight -2 #指定检测失败时，优先级减2；检测的成功或失败是由script后面指定的命令或脚本执行返回的状态码决定的，0表示成功，非0表示失败
}
在vrrp_instance VI_1 ##vrrp实例配置段添加如下:
track_script {
chk_downfile #通过指定上面定义监控脚本来监控服务状态，以完成主备切换
}重启keepalived服务创建down文件测试:
# service keepalived restart # touch /etc/keepalived/down ---在/etc/keepalived/下建立down文件可实现主备模式切换
(6)调用外部脚本检测web(nginx)健康状态
建立/etc/keepalived/chkngx.sh脚本
#/bin/bash
#/etc/keepalived/chkngx.sh
#
if pkill -0 nginx>/dev/null; then
[ `curl -sL -w %{http_code} http://localhost -o /dev/null` -eq 200 ] && exit 0
else
service nginx start
fi
exit $?授予脚本执行权限:
# chmod +x /etc/keepalived/chkngx.sh
配置keepalived.conf调用外部脚本
全局配置的段下添加如下:
vrrp_script chkngx {
script "/etc/keepalived/chkngx.sh" #指定用于检测nginx服务的执行脚本路径
interval 1 #监测间隔
weight -2 #失败时，优先级减2
fall 3 # 指定nginx检测脚本连续执行失败次数为3，才进行Failover
rise 3 # 指定nginx检测脚本连续执行成功次数为3，才进行Failback
}
在vrrp_instance VI_1 ##vrrp实例配置段添加如下:
track_script {
chkngx #通过指定上面定义监控脚本来监控服务状态，监控nginx监控状态
}(7)使用通知脚本实现如何在vrrp事务发生时，发送警告邮件给指定的管理员？ 比如：主从节点故障时
建立脚本监控脚本如下:
# vim /etc/keepalived/notify.sh
#!/bin/bash
#
declare -a vips=(172.16.100.98 172.16.100.99)
contact=‘root@localhost‘
Usage() {
echo "Usage:`basename $0`{master|backup|fault}"
}
Notify() {
if [ "$2" = "VI_1" ]; then
vip=${vips[0]}
echo $vip
elif [ "$2" = "VI_2" ]; then
vip=${vips[1]}
echo $vip
fi
suject="`hostname`‘s state chaged to $1"
mailbody="`date +%F--%H:%M:%S`: `hostname`‘s state chage to $1,vip floating..."
echo $mailbody | mail -s "$subject" $contact
echo $mailbody >> /tmp/keepalived.log
}
case $1 in
master)
Notify master
exit 0
;;
backup)
Notify backup
exit 0
;;
fault)
Notify fault
exit 0
;;
*)
Usage
exit 1
;;
esac授予脚本执行权限:
# chmod +x /etc/keepalived/notify.sh
配置keepalived.conf调用外部脚本
在vrrp_instance VI_1 ##vrrp实例配置段最后添加如下: notify_master "/etc/keepalived/notify.sh master" #状态变为master时，触发的通知脚本 notify_backup "/etc/keepalived/notify.sh backup" #状态变为backup时，触发的通知脚本 notify_fault "/etc/keepalived/notify.sh fault" #状态变为fault时，触发的通知脚本 notify "/etc/keepalived/notify.sh" #当发生所有的状态改变时，会先触发对应的状态通知脚本后，再触发该脚本
(8)使用脚本根据down文件检测实现主从状态转换
# vim /etc/keepalived/convert_state.sh
#!/bin/bash
#
usage() {
echo "./`basename $0` {master|backup}"
exit 1
}
if [ $# -eq 0 ]; then
usage
fi
if [[ "$1" = "master" ]]; then
[ -f /etc/keepalived/down ] && rm -f /etc/keepalived/down
elif [[ "$1" = "backup" ]]; then
[ ! -f /etc/keepalived/down ] && touch /etc/keepalived/down
else
usage
fi
sleep 1
# chmod +x /etc/keepalived/convert_state.sh执行脚本convert_state进行备节点转换:
# /etc/keepalived/convert_state.sh backup # ls /etc/keepalived/ | grep down down
执行脚本convert_state进行主节点转换:
# /etc/keepalived/convert_state.sh master
(9)LVS+keepalived配置ipvs规则实现负载均衡高可用
配置如下:
virtual_server 172.16.100.99 80 {
delay_loop 6
lb_algo rr
lb_kind DR
nat_mask 255.255.0.0
# persistence_timeout 50
protocol TCP
sorry_server 127.0.0.1 80 #如果所有节点都down机，将转向本地web服务
real_server 172.16.100.8 80 {
weight 1
HTTP_GET { #web健康状态检测
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
real_server 172.16.100.9 80 {
weight 1
HTTP_GET { #web健康状态检测
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}最后查询ipvs规则，如下所示:
# ipvsadm -L -n --stats IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Conns InPkts OutPkts InBytes OutBytes -> RemoteAddress:Port TCP 172.16.100.99:80 3 22 0 4657 0 -> 172.16.100.8:80 0 0 0 0 0 -> 172.16.100.9:80 0 0 0 0 0
以上为keepalived+lvs+web服务实现所有内容。
keepalived双主模型配置案例如下:
master1为:
vrrp_instance VI_1 {
state MASTER
interface eth0
virtual_router_id 51
priority 101
advert_int 1
authentication {
auth_type PASS
auth_pass keepalivedpass
}
virtual_ipaddress {
172.16.100.99 dev eth0 label eth0:0
}
track_script {
chk_downfile
}
track_script {
chkngx
}
notify_master "/etc/keepalived/notify.sh master"
notify_backup "/etc/keepalived/notify.sh backup"
notify_fault "/etc/keepalived/notify.sh fault"
notify "/etc/keepalived/notify.sh"
}
vrrp_instance VI_2 {
state BACKUP
interface eth0
virtual_router_id 52
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass keepalivedpass
}
virtual_ipaddress {
172.16.100.98 dev eth0 label eth0:1
}
track_script {
chk_downfile
}
track_script {
chkngx
}
notify_master "/etc/keepalived/notify.sh master"
notify_backup "/etc/keepalived/notify.sh backup"
notify_fault "/etc/keepalived/notify.sh fault"
notify "/etc/keepalived/notify.sh"
}master2为:
vrrp_instance VI_1 {
state BACKUP
interface eth0
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass keepalivedpass
}
virtual_ipaddress {
172.16.100.99 dev eth0 label eth0:0
}
track_script {
chk_downfile
chkngx
}
track_script {
chkngx
}
notify_master "/etc/keepalived/notify.sh master"
notify_backup "/etc/keepalived/notify.sh backup"
notify_fault "/etc/keepalived/notify.sh fault"
notify "/etc/keepalived/notify.sh"
}
vrrp_instance VI_2 {
state MASTER
interface eth0
virtual_router_id 52
priority 101
advert_int 1
authentication {
auth_type PASS
auth_pass keepalivedpass
}
virtual_ipaddress {
172.16.100.98 dev eth0 label eth0:1
}
track_script {
chk_downfile
}
track_script {
chkngx
}
notify_master "/etc/keepalived/notify.sh master"
notify_backup "/etc/keepalived/notify.sh backup"
notify_fault "/etc/keepalived/notify.sh fault"
notify "/etc/keepalived/notify.sh"
}本文出自 “Opensamlee” 博客，请务必保留此出处http://gzsamlee.blog.51cto.com/9976612/1851385
高可用集群技术之keepalived实现lvs高可用并负载均衡web服务
原文地址：http://gzsamlee.blog.51cto.com/9976612/1851385
