标签：des style blog http color 使用 os io
概述：
操作系统版本：CentOS release 6.3 (Final) 64位
nagios版本：Nagios Core 4.0.6
pnp4nagios版本：pnp4nagios-0.6.22
mk-livestatus版本：mk-livestatus-1.2.5i5p2
check_mk版本：check_mk-1.2.5i5p2
python版本:Python-2.7.8
httpd是rpm安装的,版本为:
httpd-2.2.15-30.el6.centos.x86_64
httpd-devel-2.2.15-30.el6.centos.x86_64
一、安装python模块
tar xzvf Python-2.7.8.tgz
首先需要安装python,在源码安装python时,需要加上参数
CFLAGS="-O3 -fPIC" ./configure --prefix=/usr/local/python
否则,在后续安装mod_python模块的时候会报错:
libpython2.7.a: could not read symbols: Bad value
类似这样的问题,都可以采用在编译的时候,加上CFLAGS="-O3 -fPIC" 参数
make
make install
添加python软连接:ln -s /usr/local/python/bin/python2.7 /usr/bin/python
安装mod_python,版本为:mod_python-3.3.1
tar zxf mod_python-3.3.1.tgz
安装：
./configure --with-apxs=/usr/sbin/apxs --with-python=/usr/bin/python
make
make install
注意：
1.在执行make的时候，可能会报错，提示connobject.c:142出错：
vi src/connobject.c
修改
!(b == APR_BRIGADE_SENTINEL(b) ||
为
!(b == APR_BRIGADE_SENTINEL(bb) ||
make
make install
执行完成之后,可以找到mod_python.so模块
[root@cdn18 mod_python-3.3.1]# find / -name "mod_python.so"
/usr/lib64/httpd/modules/mod_python.so
在httpd.conf中增加
LoadModule python_module modules/mod_python.so
重启apache,重新访问正常。
二、安装mk-livestatus
tar xzvf mk-livestatus-1.2.5i5p2.tar.gz
cd mk-livestatus-1.2.5i5p2
./configure --help
./configure --with-nagios4
此处一定要指定with-nagios4,否则,nagios4版本会安装不上,报错如下,说库文件未定义,nagios也无法重启
[1407810436] Error: Could not load module ‘/usr/local/lib/mk-livestatus/livestatus.o‘ -> /usr/local/lib/mk-livestatus/livestatus.o: undefined symbol: last_command_check
[1407810436] Error: Failed to load module ‘/usr/local/lib/mk-livestatus/livestatus.o‘.
[1407810436] Error: Module loading failed. Aborting.
make
make install
三、安装check_mk
tar xzvf check_mk-1.2.5i5p2.tar.gz
cd check_mk-1.2.5i5p2
./setup.sh
[root@cdn18 check_mk-1.2.5i5p2]# ./setup.sh
____ _ _ __ __ _ __
/ ___| |__ ___ ___| | __ | \/ | |/ /
| | | ‘_ \ / _ \/ __| |/ / | |\/| | ‘ /
| |___| | | | __/ (__| < | | | | . \
\____|_| |_|\___|\___|_|\_\___|_| |_|_|\_\
|_____|
Check_MK setup Version: 1.2.5i5p2
Welcome to Check_MK. This setup will install Check_MK into user defined
directories. If you run this script as root, installation paths below
/usr will be suggested. If you run this script as non-root user paths
in your home directory will be suggested. You may override the default
values or just hit enter to accept them.
Your answers will be saved to /root/.check_mk_setup.conf and will be
reused when you run the setup of this or a later version again. Please
delete that file if you want to delete your previous answers.
* Found running Nagios process, autodetected 20 settings.
* Read 32 settings from previous setup from /root/.check_mk_setup.conf.
1) Installation directories of check_mk
Executable programs
Directory where to install executable programs such as check_mk itself.
This directory should be in your search path ($PATH). Otherwise you
always have to specify the installation path when calling check_mk:
( previous --> /usr/bin):
Check_MK configuration
Directory where check_mk looks for its main configuration file main.mk.
An example configuration file will be installed there if no main.mk is
present from a previous version:
( previous --> /etc/check_mk):
Check_MK software
The base directory for the software installation of Check_MK. This
directory will get the subdirectories checks, modules, web, locale and
agents. Note: in previous versions it was possible to specify each of
those directories separately. This is no longer possible:
( previous --> /usr/share/check_mk):
documentation
Some documentation about check_mk will be installed here. Please note,
however, that most of check_mk‘s documentation is available only online at
http://mathias-kettner.de/check_mk.html:
( previous --> /usr/share/doc/check_mk):
check manuals
Directory for manuals for the various checks. The manuals can be viewed
with check_mk -M <CHECKNAME>:
( previous --> /usr/share/doc/check_mk/checks):
working directory of Check_MK
Check_MK will create log files, automatically created checks and
other files into this directory. The setup will create several subdirectories
and makes them writable by the Nagios process:
( previous --> /var/lib/check_mk):
2) Configuration of Linux/UNIX Agents
extensions for agents
This directory will not be created on the server. It will be hardcoded
into the Linux and UNIX agents. The agent will look for extensions in the
subdirectories plugins/ and local/ of that directory:
( previous --> /usr/lib/check_mk_agent):
configuration dir for agents
This directory will not be created on the server. It will be hardcoded
into the Linux and UNIX agents. The agent will look for its configuration
files here (currently only the logwatch extension needs a configuration file):
( previous --> /etc/check_mk):
3) Integration with Nagios
Name of Nagios user
The working directory for check_mk contains several subdirectories
that need to be writable by the Nagios user (which is running check_mk
in check mode). Please specify the user that should own those
directories:
( previous --> nagios):
User of Apache process
Check_MK WATO (Web Administration Tool) needs a sudo configuration,
such that Apache can run certain commands as root. If you specify
the correct user of the apache process here, then we can create a valid
sudo configuration for you later::
( previous --> apache):
Common group of Nagios+Apache
Check_mk creates files and directories while running as nagios.
Some of those need to be writable by the user that is running the webserver.
Therefore a group is needed in which both Nagios and the webserver are
members (every valid Nagios installation uses such a group to allow
the web server access to Nagios‘ command pipe)::
( previous --> nagcmd):
Nagios binary
The complete path to the Nagios executable. This is needed by the
option -R/--restart in order to do a configuration check.:
( previous --> /usr/local/nagios/bin/nagios):
Nagios main configuration file
Path to the main configuration file of Nagios. That file is always
named ‘nagios.cfg‘. The default path when compiling Nagios yourself
is /usr/local/nagios/etc/nagios.cfg. The path to this file is needed
for the check_mk option -R/--restart:
( previous --> /usr/local/nagios/etc/nagios.cfg):
Nagios object directory
Nagios‘ object definitions for hosts, services and contacts are
usually stored in various files with the extension .cfg. These files
are located in a directory that is configured in nagios.cfg with the
directive ‘cfg_dir‘. Please specify the path to that directory
(If the autodetection can find your configuration
file but does not find at least one cfg_dir directive, then it will
add one to your configuration file for your conveniance):
( previous --> /usr/local/nagios/etc/check_mk.d):
Nagios startskript
The complete path to the Nagios startskript is used by the option
-R/--restart to restart Nagios.:
( previous --> /etc/init.d/nagios):
Nagios command pipe
Complete path to the Nagios command pipe. check_mk needs write access
to this pipe in order to operate:
( previous --> /usr/local/nagios/var/rw/nagios.cmd):
Check results directory
Complete path to the directory where Nagios stores its check results.
Using that directory instead of the command pipe is faster.:
( previous --> /usr/local/nagios/var/spool/checkresults):
Nagios status file
The web pages of check_mk need to read the file ‘status.dat‘, which is
regularily created by Nagios. The path to that status file is usually
configured in nagios.cfg with the parameter ‘status_file‘. If
that parameter is missing, a compiled-in default value is used. On
FHS-conforming installations, that file usually is in /var/lib/nagios
or /var/log/nagios. If you‘ve compiled Nagios yourself, that file
might be found below /usr/local/nagios:
( previous --> /usr/local/nagios/var/status.dat):
Path to check_icmp
check_mk ships a Nagios configuration file with several host and
service templates. Some host templates need check_icmp as host check.
That check plugin is contained in the standard Nagios plugins.
Please specify the complete path (dir + filename) of check_icmp:
( previous --> /usr/local/nagios/libexec/check_icmp):
4) Integration with Apache
URL Prefix for Web addons
Usually the Multisite GUI is available at /check_mk/ and PNP4Nagios
is located at /pnp4nagios/. In some cases you might want to define some
prefix in order to be able to run more instances of Nagios on one host.
If you say /test/ here, for example, then Multisite will be located
at /test/check_mk/. Please do not forget the trailing slash.:
( previous --> /):
Apache config dir
Check_mk ships several web pages implemented in Python with Apache
mod_python. That module needs an apache configuration section which
will be installed by this setup. Please specify the path to a directory
where Apache reads in configuration files.:
( previous --> /etc/httpd/conf.d):
HTTP authentication file
Check_mk‘s web pages should be secured from unauthorized access via
HTTP authenticaion - just as Nagios. The configuration file for Apache
that will be installed contains a valid configuration for HTTP basic
auth. The most conveniant way for you is to use the same user file as
for Nagios. Please enter your htpasswd file to use here:
( previous --> /usr/local/nagios/etc/htpasswd.users):
HTTP AuthName
Check_mk‘s Apache configuration file will need an AuthName. That
string will be displayed to the user when asking for the password.
You should use the same AuthName as for Nagios. Otherwise the user will
have to log in twice:
( previous --> Nagios Access):
5) Integration with PNP4Nagios 0.6
PNP4Nagios templates
Check_MK ships templates for PNP4Nagios for most of its checks.
Those templates make the history graphs look nice. PNP4Nagios
expects such templates in the directory pnp/templates in your
document root for static web pages:
( previous --> /usr/local/pnp4nagios/share/templates):
RRD files
Configure the directory PNP4Nagios stores the RRD database files in:
( previous --> /usr/local/pnp4nagios/var/perfdata):
rrdcached socket
If you use the rrdcached to process performance data from Nagios,
you can configure the socket of the rrdcached here to make the prediction
feature use it:
( previous --> /tmp/rrdcached.sock):
6) Check_MK Livestatus Module
compile livestatus module
The well known MK Livestatus broker module is part of Check_MK.
It provides direct access to Nagios internal data structures. It aims to
supersede status.dat and also NDO. The Livestatus Module does not only
allow extremely fast access to the status of your services and hosts, it
does also provide live data (which status.dat does not). Also - unlike NDO -
Livestatus does not cost you even measurable CPU performance, does not need
any disk space and also needs no configuration.
Livestatus is neccessary when you want to use Multisite. It is also
the preferred backend for NagVis.
Please answer ‘yes‘, if you want to compile and integrate the
Livestatus module into your Nagios. You need ‘make‘ and the GNU
C++ compiler installed in order to do this:
( previous --> yes):
Nagios / Icinga version
The version is required for the compilation of the livestatus module.
Depending on the major version (3 or 4) different nagios headers are included:
( previous --> 4.0.6):
check_mk‘s binary modules
Directory for architecture dependent binary libraries and plugins
of check_mk:
( previous --> /usr/lib/check_mk):
Unix socket for Livestatus
The Livestatus Module provides Nagios status data via a unix
socket. This is similar to the Nagios command pipe, but allows
bidirectional communication. Please enter the path to that pipe.
It is recommended to put it into the same directory as Nagios‘
command pipe:
( previous --> /usr/local/nagios/var/rw/live):
Backends for other systems
Directory where to put backends and configuration examples for
other systems. Currently this is only Nagvis, but other might follow
later.:
( previous --> /usr/share/check_mk/livestatus):
7) Check_MK Event Console
Install Event Console
The Check_MK Event Console is a full featured event processing
module that integrates with Multisite. It has an own daemon and
several methods for retrieving events. It even has an integrated
syslog daemon. Please answer ‘yes‘, if you want to enable the
Event Console.:
( previous --> no):
----------------------------------------------------------------------
You have chosen the following directories:
Executable programs /usr/bin
Check_MK configuration /etc/check_mk
Check_MK software /usr/share/check_mk
documentation /usr/share/doc/check_mk
check manuals /usr/share/doc/check_mk/checks
working directory of Check_MK /var/lib/check_mk
extensions for agents /usr/lib/check_mk_agent
configuration dir for agents /etc/check_mk
Name of Nagios user nagios
User of Apache process apache
Common group of Nagios+Apache nagcmd
Nagios binary /usr/local/nagios/bin/nagios
Nagios main configuration file /usr/local/nagios/etc/nagios.cfg
Nagios object directory /usr/local/nagios/etc/check_mk.d
Nagios startskript /etc/init.d/nagios
Nagios command pipe /usr/local/nagios/var/rw/nagios.cmd
Check results directory /usr/local/nagios/var/spool/checkresults
Nagios status file /usr/local/nagios/var/status.dat
Path to check_icmp /usr/local/nagios/libexec/check_icmp
URL Prefix for Web addons /
Apache config dir /etc/httpd/conf.d
HTTP authentication file /usr/local/nagios/etc/htpasswd.users
HTTP AuthName Nagios Access
PNP4Nagios templates /usr/local/pnp4nagios/share/templates
RRD files /usr/local/pnp4nagios/var/perfdata
rrdcached socket /tmp/rrdcached.sock
compile livestatus module yes
Nagios / Icinga version 4.0.6
check_mk‘s binary modules /usr/lib/check_mk
Unix socket for Livestatus /usr/local/nagios/var/rw/live
Backends for other systems /usr/share/check_mk/livestatus
Install Event Console no
Proceed with installation (y/n)? y
(Compiling MK Livestatus......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................)
Installation completed successfully.
Please restart Nagios and Apache in order to update/active check_mk‘s web pages.
You can access the new Multisite GUI at http://localhost/check_mk/
========================
至此，check_mk安装完成
打开check_mk的web页面，报错如下：
Livestatus problem:Cannot connect to ‘unix:/usr/local/nagios/var/rw/live‘:[Error 13]Permission denied
解决方法：
check_mk，安装完成之后，web报错：
Cannot connect to ‘unix:/usr/local/nagios/var/rw/live‘: [Errno 13] Permission denied
Livestatus problem: Cannot connect to ‘unix:/usr/local/nagios/var/rw/live‘: [Errno 13] Permission denied
这个文件，nagios用户本身是有权限的,而且，文件是自动生成，权限是nagios：nagios的,但是因为这个socket文件是apache用户操作的，所以apache需要写权限。
默认的live文件权限是：srw-rw---- 1 nagios nagios 0 Aug 12 16:30 live
#vim /usr/local/nagios/etc/nagios.cfg
添加如下内容：
broker_module=/usr/lib/check_mk/livestatus.o /usr/local//nagios/var/rw/live
#usermod -G apache,nagios,nagcmd nagios
#usermod -G apache,nagios,nagcmd apache
#service nagios restart
#tail /usr/local//nagios/var/nagios.log
本身，执行chmod 777 live文件就可以解决，或者是chown -R nagios:apache live，因为这个socket文件是apache用户组写的，或者直接将apache用户加入到nagios和nagcmd用户组，但是，最好的方法是将apache用户加到nagios用户组。
如果是采用的赋权修改live的方式，因为每次重启nagios,都会重新生成这个live文件,所以最好在nagios的启动脚本里面加入chown -R nagios:apache live命令
四、安装check_mk客户端：
Linux主机
#rpm -ivh check_mk-agent-1.2.5i5p2-1.noarch.rpm
指定被监控端的IP
#vim /etc/xinetd.d/check_mk
修改only_from = “监控端IP”（服务端IP）
重启xinetd
#service xinedt restart
windows主机
下载http://mathias-kettner.de/download/check-mk-agent-1.2.5i5p2.exe
安装即可
编辑安装目录下的check_mk.example.ini
修改only_from = “监控端IP”（服务端IP）
重启Check_MK_Agent服务即可。
五、监控Linux主机
#vim /etc/check_mk/main.mk
修改all_hosts，填写每一个被监控机的IP地址，中间用,隔开，这里的IP地址如果在nagios中你作为hostname使用的话，请修改nagios中的hostname或者将其注释掉，否则两者将会冲突报错。
all_hosts = [ ‘192.168.203.10‘,‘192.168.203.20‘ ]
保存退出后：
执行以下命令：
#check_mk -I
检查所有可检测的项目
df 8 new checks
logwatch 14 new checks
mem.win 2 new checks
systemtime 2 new checks
uptime 2 new checks
winperf_phydisk 2 new checks
winperf_processor.util 2 new checks
#check_mk -O
创建或更新Nagios配置，并且重新加载Nagios
Generating Nagios configuration...OK
Validating Nagios configuration...OK
Precompiling host checks...OK
Reloading Nagios...OK
发现并未出现定义的那些主机
#vim /etc/check_mk/multisite.mk
将admin_users = [ "nagiosadmin" ] 修改为登陆到nagios的用户名，即htpasswd定义的用户名，我这里是admin
admin_users = [ "nagios" ]
保存退出，重新刷新，即可看到刚才定义的主机了
在长时间的观察发现，这些定义的主机的服务器基本上已正常，但是主机确实down的状态
错误提示：
Waring:This plugin must be either run as root or setuid root"
解决方法：
找到当初安装check_mk时附带的check_icmp命令
#chown root:nagios check_icmp
#chmod u+s check_icmp
稍等下，主机马上就处于up状态。
如果是少量机器，个人更推荐是从web界面配置主机，web配置主机之后，也需要执行check_mk -I，check_mk -O，但是，不需要收到修改客户端的配置文件的only_from
对于从web界面直接添加主机的方法，点击左下角的一个Hosts & Folders按钮，点击New host即可，如下：
http://www.newsmth.net/nForum/#!article/Python/101637
http://grass51.blog.51cto.com/4356355/994819
解决问题参考以上链接
check_MK安装部署（nagios4版本）,布布扣,bubuko.com
标签：des style blog http color 使用 os io
原文地址：http://www.cnblogs.com/krainbow/p/3909472.html
