Linux文件类型及颜色标识整理
使用工具：
ls命令
ls –l:以常格式显示文件及目录的详细信息
例如：-rw-r--r-- 1 root root 0 10月 12 13:32 2016-10-12-13-32-11
-rw-------.1 root root 1487 9月 12 10:56 anaconda-ks.cfg
drwxr-xr-x 3 root root 51 10月 14 10:18 application
根据示例显示，各种文件的文件名是以不同颜色显示来区分
文件类型介绍：
-：常规文件，普通文件；
d：目录文件，路径映射；
b：块设备文件；支持以“block”为单位进行随机访问；
c：字符设备文件，支持以“character”为单位进行线性访问；
mojornumber：主设备号，表示设备类型，进而确定要加载的驱动；
minornumber：次设备号，标识同一类型中的不同设备；
l：符号链接文件；
p：命令管道文件；
s：socket 套接字文件；
文件颜色介绍：
蓝色：目录；
绿色：可执行文件；
红色：压缩文件；
浅蓝色：链接文件；
白色：其他文件；
黄色：设备文件，包括block, char, fifo。
红色闪烁：链接的文件有问题了；
拓展：
1、可以使用dircolors -p看到缺省的颜色设置，包括各种颜色和“粗体”，下划线，闪烁等定义。
2、在/etc/DIR_COLORS文件，这是一个着色控制的模版。
3、修改其他颜色的方法：
首先
# vi/etc/DIR_COLORS
内的设定“DIR 01；34”，为ls命令的目录的颜色设置，01表示粗体，34表示字体蓝色。
我把它改成了“DIR 01；37；44”，37是字体白色，44是字背景蓝色，视觉效果还可以，而且习惯上也能接受。
然后，执行
# eval `dircolors/etc/DIR_COLORS`
4、以上方法是对全局修改,个人用户修改方法：
将/etc/DIR_COLORS文件cp到~/下，并改名为.dir_colors,再修改这个文件就可以了
以下是官方文档说明：
Linux / UnixCommand: dir_colors
NAMEdir_colors - configuration file for
dircolors
(1)
DESCRIPTIONThe program
ls
(1) uses the environment variable LS_COLORS to determine the colorsin which the filenames are to be displayed. This environment variable isusually set by a command like
eval `dircolors some_path/dir_colors`
found in a system default shell initialization file, like /etc/profileor /etc/csh.cshrc. (See also
dircolors
(1).) Usually, the file used here is /etc/DIR_COLORS and can beoverridden by a .dir_colors file in one‘s home directory.
This configuration file consists of several statements, one per line. Anythingright of a hash mark (#) is treated as a comment, if the hash mark is at thebeginning of a line or is preceded by at least one whitespace. Blank lines areignored.
The global section of the file consists of any statement before thefirst TERM statement. Any statement in the global section of the file isconsidered valid for all terminal types. Following the global section is one ormore terminal-specific sections, preceded by one or more TERMstatements which specify the terminal types (as given by the TERMenvironment variable) the following declarations apply to. It is alwayspossible to override a global declaration by a subsequent terminal-specificone.
The following statements are recognized; case is insignificant:
TERM terminal-type
Starts a terminal-specific section and specifies which terminal it applies to.Multiple TERM statements can be used to create a section which appliesfor several terminal types.
COLOR yes|all|no|none|tty
(Slackware only; ignored by GNU
dircolors
(1).) Specifies that colorization should always be enabled (yes or all),never enabled (no or none), or enabled only if the output is aterminal (tty). The default is no.
EIGHTBIT yes|no
(Slackware only; ignored by GNU
dircolors
(1).) Specifies that eight-bit ISO 8859 characters should be enabled bydefault. For compatibility reasons, this can also be specified as 1 for yesor 0 for no. The default is no.
OPTIONS options
(Slackware only; ignored by GNU
dircolors
(1).) Adds command line options to the default ls command line. Theoptions can be any valid ls command line options, and should include theleading minus sign. Please note that dircolors does not verify thevalidity of these options.
NORMAL color-sequence
Specifies the color used for normal (non-filename) text.
FILE color-sequence
Specifies the color used for a regular file.
DIR color-sequence
Specifies the color used for directories.
LINK color-sequence
Specifies the color used for a symbolic link.
ORPHAN color-sequence
Specifies the color used for an orphaned symbolic link (one which points to anonexistent file). If this is unspecified, ls will use the LINKcolor instead.
MISSING color-sequence
Specifies the color used for a missing file (a nonexistent file whichnevertheless has a symbolic link pointing to it). If this is unspecified, lswill use the FILE color instead.
FIFO color-sequence
Specifies the color used for a FIFO (named pipe).
SOCK color-sequence
Specifies the color used for a socket.
DOOR color-sequence
(Supported since file-utils 4.1) Specifies the color used for a door (Solaris2.5 and later).
BLK color-sequence
Specifies the color used for a block device special file.
CHR color-sequence
Specifies the color used for a character device special file.
EXEC color-sequence
Specifies the color used for a file with the executable attribute set.
LEFTCODE color-sequence
Specifies the left code for non-ISO 6429 terminals (see below).
RIGHTCODE color-sequence
Specifies the right code for non-ISO 6429 terminals (see below).
ENDCODE color-sequence
Specifies the end code for non-ISO 6429 terminals (see below).
*extension color-sequence
Specifies the color used for any file that ends in extension.
.extension color-sequence
Same as *.extension. Specifies the color used for any file thatends in .extension. Note that the period is included in the extension,which makes it impossible to specify an extension not starting with a period,such as ~ for emacs backup files. This form should be consideredobsolete.
ISO 6429 (ANSI) COLOR SEQUENCESMost color-capable ASCII terminals today use ISO6429 (ANSI) color sequences, and many common terminals without colorcapability, including xterm and the widely used and cloned DEC VT100,will recognize ISO 6429 color codes and harmlessly eliminate them from theoutput or emulate them. ls uses ISO 6429 codes by default, assumingcolorization is enabled.
ISO 6429 color sequences are composed of sequences of numbers separated bysemicolons. The most common codes are:
0 to restore default color
1 for brighter colors
4 for underlined text
5 for flashing text
30 for black foreground
31 for red foreground
32 for green foreground
33 for yellow (or brown) foreground
34 for blue foreground
35 for purple foreground
36 for cyan foreground
37 for white (or gray) foreground
40 for black background
41 for red background
42 for green background
43 for yellow (or brown) background
44 for blue background
45 for purple background
46 for cyan background
47 for white (or gray) background
Not all commands will work on all systems or display devices.
ls uses the following defaults:
NORMAL 0 Normal (non-filename)text
FILE 0 Regular file
DIR 32 Directory
LINK 36 Symbolic link
ORPHAN undefined Orphannedsymbolic link
MISSING undefined Missing file
FIFO 31 Named pipe(FIFO)
SOCK 33 Socket
BLK 44;37 Block device
CHR 44;37 Character device
EXEC 35 Executable file
A few terminal programs do not recognize the default properly. If all text getscolorized after you do a directory listing, change the NORMAL and FILEcodes to the numerical codes for your normal foreground and backgroundcolors.
OTHER TERMINAL TYPES (ADVANCED CONFIGURATION)If you have a color-capable (orotherwise highlighting) terminal (or printer!) which uses a different set ofcodes, you can still generate a suitable setup. To do so, you will have to usethe LEFTCODE, RIGHTCODE, and ENDCODE definitions.
When writing out a filename, ls generates the following output sequence:LEFTCODE typecode RIGHTCODE filename ENDCODE,where the typecode is the color sequence that depends on the type orname of file. If the ENDCODE is undefined, the sequence LEFTCODENORMAL RIGHTCODE will be used instead. The purpose of the left- andrightcodes is merely to reduce the amount of typing necessary (and to hide uglyescape codes away from the user). If they are not appropriate for yourterminal, you can eliminate them by specifying the respective keyword on a lineby itself.
NOTE: If the ENDCODE is defined in the global section of thesetup file, it cannot be undefined in a terminal-specific section of thefile. This means any NORMAL definition will have no effect. A different ENDCODEcan, however, be specified, which would have the same effect.
ESCAPE SEQUENCESTo specify control- or blank characters in the color sequencesor filename extensions, either C-style \-escaped notation or stty-style^-notation can be used. The C-style notation includes the following characters:
\a Bell (ASCII 7)
\b Backspace (ASCII 8)
\e Escape (ASCII 27)
\f Form feed (ASCII 12)
\n Newline (ASCII 10)
\r Carriage Return (ASCII 13)
\t Tab (ASCII 9)
\v Vertical Tab (ASCII 11)
\? Delete (ASCII 127)
\nnn Any character (octal notation)
\xnnn Any character(hexadecimal notation)
\_ Space
\\ Backslash (\)
\^ Caret (^)
\# Hash mark (#)
Please note that escapes are necessary to enter a space, backslash, caret, orany control character anywhere in the string, as well as a hash mark as thefirst character.
原文地址：http://8248183.blog.51cto.com/8238183/1864046
