在人工手动进行一些数据库写操作的时候（比方说数据订正），尤其是一些不可控的批量更新或删除，通常都建议备份后操作。不过不怕万一，就怕一万，有备无患总是好的。在线上或者测试环境误操作导致数据被删除或者更新后，想要恢复，一般有两种方法。

方法一、利用最近的全量备份+增量binlog备份，恢复到误操作之前的状态，但是随着数据量的增大，binlog的增多，恢复起来很费时。
方法二、如果binlog的格式为row，那么就可以将binlog解析出来生成反向的原始SQL

以下是利用方法二写的一个python脚本binlog_rollback.py，可利用此脚本生成反向的原始SQL。

说明：

0、前提是binlog的格式为row
1、要恢复的表操作前后表结构没有发生变更，否则脚本无法解析
2、只生成DML(insert/update/delete)的rollback语句
3、最终生成的SQL是逆序的，所以最新的DML会生成在输入文件的最前面，并且带上了时间戳和偏移点，方便查找目标
4、需要提供一个连接MySQL的只读用户，主要是为了获取表结构
5、如果binlog过大，建议带上时间范围，也可以指定只恢复某个库的SQL
6、SQL生成后，请务必在测试环境上测试恢复后再应用到线上

演示

#首先创建一个只读账号
root:test> grant select on *.* to ‘query‘@‘127.0.0.1‘ identified by ‘123456‘;
Query OK, 0 rows affected, 1 warning (0.01 sec)
#测试表结构如下
root:test> CREATE TABLE `table1` (
    ->   `id` int(11) NOT NULL AUTO_INCREMENT,
    ->   `c1` int(11) DEFAULT NULL,
    ->   `c2` varchar(20) DEFAULT NULL,
    ->   `c3` int(11) DEFAULT NULL,
    ->   PRIMARY KEY (`id`)
    -> );
Query OK, 0 rows affected (0.09 sec)

#插入三条数据
root:test> insert into table1(c1,c2,c3) values (1,‘a‘,1),(2,‘b‘,2),(3,‘c‘,3);
Query OK, 3 rows affected (0.01 sec)
Records: 3  Duplicates: 0  Warnings: 0

root:test> select * from table1;
+----+------+------+------+
| id | c1   | c2   | c3   |
+----+------+------+------+
|  1 |    1 | a    |    1 |
|  2 |    2 | b    |    2 |
|  3 |    3 | c    |    3 |
+----+------+------+------+
3 rows in set (0.00 sec)

#更新一条数据
root:test> update table1 set c3=10 where id=3;
Query OK, 1 row affected (0.01 sec)
Rows matched: 1  Changed: 1  Warnings: 0

root:test> select * from table1;
+----+------+------+------+
| id | c1   | c2   | c3   |
+----+------+------+------+
|  1 |    1 | a    |    1 |
|  2 |    2 | b    |    2 |
|  3 |    3 | c    |   10 |
+----+------+------+------+
3 rows in set (0.00 sec)

#删除一条数据

root:test> delete from table1 where id=1;
Query OK, 1 row affected (0.01 sec)

root:test> select * from table1;
+----+------+------+------+
| id | c1   | c2   | c3   |
+----+------+------+------+
|  2 |    2 | b    |    2 |
|  3 |    3 | c    |   10 |
+----+------+------+------+
2 rows in set (0.00 sec)

接下来利用脚本来生成反向SQL

[root@diandi ~]# python binlog_rollback.py -f /log/mysql/bin/mysql-bin.000002  -o rollback.sql -u query -p 123456 --start-datetime=‘2016-10-28 00:00:00‘ -d test
正在获取参数.....
正在解析binlog.....
正在初始化列名.....
正在开始拼凑sql.....
done!

查看反向SQL，最新的DML会生成在输入文件的最前面

[root@diandi ~]# cat rollback.sql 
## at 155848
##161028 17:07:10 server id 22100  end_log_pos 155898 CRC32 0x5000bca7  Delete_rows: table id 351 flags: STMT_END_F
INSERT INTO `test`.`table1`
SET
  id=1
  ,c1=1
  ,c2=‘a‘
  ,c3=1;
## at 155560
##161028 17:04:56 server id 22100  end_log_pos 155626 CRC32 0x11d91e2d  Update_rows: table id 351 flags: STMT_END_F
UPDATE `test`.`table1`
SET
  id=3
  ,c1=3
  ,c2=‘c‘
  ,c3=3
WHERE
  id=3
  AND c1=3
  AND c2=‘c‘
  AND c3=10;
## at 155258
##161028 16:59:31 server id 22100  end_log_pos 155338 CRC32 0x3978c1c1  Write_rows: table id 351 flags: STMT_END_F
DELETE FROM `test`.`table1`
WHERE
  id=3
  AND c1=3
  AND c2=‘c‘
  AND c3=3;
DELETE FROM `test`.`table1`
WHERE
  id=2
  AND c1=2
  AND c2=‘b‘
  AND c3=2;
DELETE FROM `test`.`table1`
WHERE
  id=1
  AND c1=1
  AND c2=‘a‘
  AND c3=1;

执行回滚操作

#直接source整个文件，table1将恢复到原来的空表状态（实际情况，在测试环境上按需索取，然后再恢复线上）
root:test> source /root/rollback.sql
Query OK, 1 row affected (0.01 sec)

Query OK, 1 row affected (0.01 sec)
Rows matched: 1  Changed: 1  Warnings: 0

Query OK, 1 row affected (0.01 sec)

Query OK, 1 row affected (0.01 sec)

Query OK, 1 row affected (0.01 sec)

root:test> select * from table1;
Empty set (0.00 sec)

具体的参数使用方法如下：

[root@diandi ~]# python binlog_rollback.py 
==========================================================================================
Command line options :
    --help                  # OUT : print help info
    -f, --binlog            # IN  : binlog file. (required)
    -o, --outfile           # OUT : output rollback sql file. (default ‘rollback.sql‘)
    -h, --host              # IN  : host. (default ‘127.0.0.1‘)
    -u, --user              # IN  : user. (required)
    -p, --password          # IN  : password. (required)
    -P, --port              # IN  : port. (default 3306)
    --start-datetime        # IN  : start datetime. (default ‘1970-01-01 00:00:00‘)
    --stop-datetime         # IN  : stop datetime. default ‘2070-01-01 00:00:00‘
    --start-position        # IN  : start position. (default ‘4‘)
    --stop-position         # IN  : stop position. (default ‘18446744073709551615‘)
    -d, --database          # IN  : List entries for just this database (No default value).
    --only-primary          # IN  : Only list primary key in where condition (default 0)

Sample :
   shell> python binlog_rollback.py -f ‘mysql-bin.000001‘ -o ‘/tmp/rollback.sql‘ -h 192.168.0.1 -u ‘user‘ -p ‘pwd‘ -P 3307 -d dbname

脚本代码

#!/bin/env python
# -*- coding:utf-8 -*-

import os,sys,re,getopt
import MySQLdb


host = ‘127.0.0.1‘
user = ‘‘
password = ‘‘
port = 3306
start_datetime = ‘1971-01-01 00:00:00‘
stop_datetime = ‘2037-01-01 00:00:00‘
start_position = ‘4‘
stop_position = ‘18446744073709551615‘
database = ‘‘
mysqlbinlog_bin = ‘mysqlbinlog -v‘
binlog = ‘‘
fileContent = ‘‘
output=‘rollback.sql‘
only_primary = 0


# ----------------------------------------------------------------------------------------
# 功能:获取参数,生成相应的binlog解析文件
# ----------------------------------------------------------------------------------------
def getopts_parse_binlog():
    global host
    global user
    global password
    global port
    global fileContent
    global output
    global binlog
    global start_datetime
    global stop_datetime
    global start_position
    global stop_position
    global database
    global only_primary
    try:
        options, args = getopt.getopt(sys.argv[1:], "f:o:h:u:p:P:d:", ["help","binlog=","output=","host=","user=","password=","port=","start-datetime=",                                                                       "stop-datetime=","start-position=","stop-position=","database=","only-primary="])
    except getopt.GetoptError:
        print "参数输入有误!!!!!"
        options = []
    if options == [] or options[0][0] in ("--help"):
        usage()
        sys.exit()
    print "正在获取参数....."
    for name, value in options:
        if name == "-f" or name == "--binlog":
            binlog = value
        if name == "-o" or name == "--output":
            output = value
        if name == "-h" or name == "--host":
            host = value
        if name == "-u" or name == "--user":
            user = value
        if name == "-p" or name == "--password":
            password = value
        if name == "-P" or name == "--port":
            port = value
        if name == "--start-datetime":
            start_datetime = value
        if name == "--stop-datetime":
            stop_datetime = value
        if name == "--start-position":
            start_position = value
        if name == "--stop-position":
            stop_position = value
        if name == "-d" or name == "--database":
            database = value
        if name == "--only-primary" :
            only_primary = value

    if binlog == ‘‘ :
        print "错误:请指定binlog文件名!"
        usage()
    if user == ‘‘ :
        print "错误:请指定用户名!"
        usage()
    if password == ‘‘ :
        print "错误:请指定密码!"
        usage()
    if database <> ‘‘ :
       condition_database = "--database=" + "‘" + database + "‘"
    else:
        condition_database = ‘‘
    print "正在解析binlog....."
    fileContent=os.popen("%s %s  --base64-output=DECODE-ROWS --start-datetime=‘%s‘ --stop-datetime=‘%s‘ --start-position=‘%s‘ --stop-position=‘%s‘ %s                   |grep ‘###‘ -B 2|sed -e ‘s/### //g‘ -e ‘s/^INSERT/##INSERT/g‘ -e ‘s/^UPDATE/##UPDATE/g‘ -e ‘s/^DELETE/##DELETE/g‘ "                    %(mysqlbinlog_bin,binlog,start_datetime,stop_datetime,start_position,stop_position,condition_database)).read()
    #print fileContent



# ----------------------------------------------------------------------------------------
# 功能:初始化binlog里的所有表名和列名,用全局字典result_dict来储存每个表有哪些列
# ----------------------------------------------------------------------------------------
def init_col_name():
    global result_dict
    global pri_dict
    global fileContent
    result_dict = {}
    pri_dict = {}
    table_list = re.findall(‘`.*`\\.`.*`‘,fileContent)
    table_list = list(set(table_list))
    #table_list 为所有在这段binlog里出现过的表
    print "正在初始化列名....."
    for table in table_list:
        sname = table.split(‘.‘)[0].replace(‘`‘,‘‘)
        tname = table.split(‘.‘)[1].replace(‘`‘,‘‘)
        #连接数据库获取列和列id
        try:
            conn = MySQLdb.connect(host=host,user=user,passwd=password,port=int(port))
            cursor = conn.cursor()
            cursor.execute("select ordinal_position,column_name                                                        from information_schema.columns                                                        where table_schema=‘%s‘ and table_name=‘%s‘ " %(sname,tname))

            result=cursor.fetchall()
            if result == () :
                print ‘Warning:‘+sname+‘.‘+tname+‘已删除‘
                #sys.exit()
            result_dict[sname+‘.‘+tname]=result
            cursor.execute("select ordinal_position,column_name                                  from information_schema.columns                                where table_schema=‘%s‘ and table_name=‘%s‘ and column_key=‘PRI‘ " %(sname,tname))
            pri=cursor.fetchall()
            #print pri
            pri_dict[sname+‘.‘+tname]=pri
            cursor.close()
            conn.close()
        except MySQLdb.Error, e:
            try:
                print "Error %d:%s" % (e.args[0], e.args[1])
            except IndexError:
                print "MySQL Error:%s" % str(e)

            sys.exit()
    #print result_dict
    #print pri_dict

# ----------------------------------------------------------------------------------------
# 功能:拼凑回滚sql,逆序
# ----------------------------------------------------------------------------------------
def gen_rollback_sql():
    global only_primary
    fileOutput = open(output, ‘w‘)
    #先将文件根据‘--‘分块,每块代表一个sql
    area_list=fileContent.split(‘--\n‘)
    #逆序读取分块
    print "正在开始拼凑sql....."
    for area in area_list[::-1]:
        #由于一条sql可能影响多行,每个sql又可以分成多个逐条执行的sql
        sql_list = area.split(‘##‘)
        #先将pos点和timestamp传入输出文件中
        for sql_head in sql_list[0].splitlines():
            sql_head = ‘#‘+sql_head+‘\n‘
            fileOutput.write(sql_head)
        #逐条sql进行替换更新,逆序
        for sql in sql_list[::-1][0:-1]:
            try:
                if sql.split()[0] == ‘INSERT‘:
                    rollback_sql = re.sub(‘^INSERT INTO‘, ‘DELETE FROM‘, sql, 1)
                    rollback_sql = re.sub(‘SET\n‘, ‘WHERE\n‘, rollback_sql, 1)
                    tablename_pos = 2
                    table_name = rollback_sql.split()[tablename_pos].replace(‘`‘, ‘‘)
                    # 获取该sql中的所有列
                    col_list = sorted(list(set(re.findall(‘@\d+‘, rollback_sql))))
                    # 因为第一个列前面没有逗号或者and,所以单独替换
                    rollback_sql = rollback_sql.replace(‘@1=‘, result_dict[table_name][0][1]+‘=‘)
                    for col in col_list[1:]:
                        i = int(col[1:]) - 1
                        rollback_sql = rollback_sql.replace(col+‘=‘, ‘AND ‘ + result_dict[table_name][i][1]+‘=‘,1)
                    # 如果only_primary开启且存在主键,where条件里就只列出主键字段
                    if int(only_primary) == 1 and pri_dict[table_name] <> ():
                        sub_where = ‘‘
                        for primary in pri_dict[table_name]:
                            primary_name = primary[1]
                            for condition in rollback_sql.split(‘WHERE‘, 1)[1].splitlines():
                                if re.compile(‘^\s*‘+primary_name).match(condition) or re.compile(‘^\s*AND\s*‘+primary_name).match(condition):
                                    sub_where = sub_where + condition + ‘\n‘
                        sub_where = re.sub(‘^\s*AND‘, ‘‘, sub_where, 1)
                        rollback_sql = rollback_sql.split(‘WHERE‘, 1)[0] + ‘WHERE\n‘ + sub_where
                if sql.split()[0] == ‘UPDATE‘:
                    rollback_sql = re.sub(‘SET\n‘, ‘#SET#\n‘, sql, 1)
                    rollback_sql = re.sub(‘WHERE\n‘, ‘SET\n‘, rollback_sql, 1)
                    rollback_sql = re.sub(‘#SET#\n‘, ‘WHERE\n‘, rollback_sql, 1)
                    tablename_pos = 1
                    table_name = rollback_sql.split()[tablename_pos].replace(‘`‘, ‘‘)
                    # 获取该sql中的所有列
                    col_list = sorted(list(set(re.findall(‘@\d+‘, rollback_sql))))
                    # 因为第一个列前面没有逗号或者and,所以单独替换
                    rollback_sql = rollback_sql.replace(‘@1=‘, result_dict[table_name][0][1] + ‘=‘)
                    for col in col_list[1:]:
                        i = int(col[1:]) - 1
                        rollback_sql = rollback_sql.replace(col+‘=‘, ‘,‘ + result_dict[table_name][i][1]+‘=‘, 1).replace(col+‘=‘,‘AND ‘ +result_dict[table_name][i][1]+‘=‘)
                    # 如果only_primary开启且存在主键,where条件里就只列出主键字段
                    if int(only_primary) == 1 and pri_dict[table_name] <> ():
                        sub_where = ‘‘
                        for primary in pri_dict[table_name]:
                            primary_name = primary[1]
                            for condition in rollback_sql.split(‘WHERE‘, 1)[1].splitlines():
                                if re.compile(‘^\s*‘ + primary_name).match(condition) or re.compile(‘^\s*AND\s*‘+primary_name).match(condition):
                                    sub_where = sub_where + condition + ‘\n‘
                        sub_where = re.sub(‘^\s*AND‘, ‘‘, sub_where, 1)
                        rollback_sql = rollback_sql.split(‘WHERE‘, 1)[0] + ‘WHERE\n‘ + sub_where

                if sql.split()[0] == ‘DELETE‘:
                    rollback_sql = re.sub(‘^DELETE FROM‘, ‘INSERT INTO‘, sql, 1)
                    rollback_sql = re.sub(‘WHERE\n‘, ‘SET\n‘, rollback_sql, 1)
                    tablename_pos = 2
                    table_name = rollback_sql.split()[tablename_pos].replace(‘`‘, ‘‘)
                    # 获取该sql中的所有列
                    col_list = sorted(list(set(re.findall(‘@\d+‘, rollback_sql))))
                    # 因为第一个列前面没有逗号或者and,所以单独替换
                    rollback_sql = rollback_sql.replace(‘@1=‘, result_dict[table_name][0][1] + ‘=‘)
                    for col in col_list[1:]:
                        i = int(col[1:]) - 1
                        rollback_sql = rollback_sql.replace(col+‘=‘, ‘,‘ + result_dict[table_name][i][1]+‘=‘,1)

                rollback_sql = re.sub(‘\n$‘,‘;\n‘,rollback_sql)
                #print rollback_sql
                fileOutput.write(rollback_sql)
            except IndexError,e:
                print "Error:%s" % str(e)
                sys.exit()
    print "done!"

def usage():
    help_info="""==========================================================================================
Command line options :
    --help                  # OUT : print help info
    -f, --binlog            # IN  : binlog file. (required)
    -o, --outfile           # OUT : output rollback sql file. (default ‘rollback.sql‘)
    -h, --host              # IN  : host. (default ‘127.0.0.1‘)
    -u, --user              # IN  : user. (required)
    -p, --password          # IN  : password. (required)
    -P, --port              # IN  : port. (default 3306)
    --start-datetime        # IN  : start datetime. (default ‘1970-01-01 00:00:00‘)
    --stop-datetime         # IN  : stop datetime. default ‘2070-01-01 00:00:00‘
    --start-position        # IN  : start position. (default ‘4‘)
    --stop-position         # IN  : stop position. (default ‘18446744073709551615‘)
    -d, --database          # IN  : List entries for just this database (No default value).
    --only-primary          # IN  : Only list primary key in where condition (default 0)

Sample :
   shell> python binlog_rollback.py -f ‘mysql-bin.000001‘ -o ‘/tmp/rollback.sql‘ -h 192.168.0.1 -u ‘user‘ -p ‘pwd‘ -P 3307 -d dbname
=========================================================================================="""

    print help_info
    sys.exit()



if __name__ == ‘__main__‘:
    getopts_parse_binlog()
    init_col_name()
    gen_rollback_sql()

View Code

MySQL利用binlog恢复误操作数据

说明：

演示