码迷,mamicode.com
首页 > 数据库 > 详细

centos 6.3 编译安装 nginx +mysql + php

时间:2014-08-14 20:12:19      阅读:337      评论:0      收藏:0      [点我收藏+]

标签:des   style   blog   http   color   使用   os   io   

一篇文章是对另一篇文章的整理,作为记录收藏

 

1,配置防火墙,开启80端口、3306端口

配置iptables,开启80端口、3306端口

vi /etc/sysconfig/iptables

-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT #允许80端口通过防火墙

-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT #允许3306端口通过防火墙

特别提示:很多网友把这两条规则添加到防火墙配置的最后一行,导致防火墙启动失败,正确的应该是添加到默认的22端口这条规则的下面

添加好之后防火墙规则如下所示:

#########################################################

# Firewall configuration written by system-config-firewall

# Manual customization of this file is not recommended.

*filter

:INPUT ACCEPT [0:0]

:FORWARD ACCEPT [0:0]

:OUTPUT ACCEPT [0:0]

-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

-A INPUT -p icmp -j ACCEPT

-A INPUT -i lo -j ACCEPT

-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT

-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT

-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT

-A INPUT -j REJECT --reject-with icmp-host-prohibited

-A FORWARD -j REJECT --reject-with icmp-host-prohibited

COMMIT

#########################################################

/etc/init.d/iptables restart #最后重启防火墙使配置生效

 

关闭SELINUX

vi /etc/selinux/config

#SELINUX=enforcing #注释掉

#SELINUXTYPE=targeted #注释掉

SELINUX=disabled #增加

:wq 保存,关闭

shutdown -r now #重启系统

2.准备软件包

cmake-2.8.8.tar.gz

libmcrypt-2.5.8.tar.gz

mysql-5.5.25.tar.gz

nginx-1.2.2.tar.gz

pagekit-master.zip

pcre-8.31.tar.gz

php-5.4.5.tar.gz

将软件包放在/usr/local/src目录中

软件源代码包存放位置:/usr/local/src

源码包编译安装位置:/usr/local/软件名字

 

3.更新系统

  sudo yum update

4.安装编译工具及库文件(使用CentOS yum命令安装)

  yum install make apr* autoconf automake curl-devel gcc gcc-c++ zlib-devel openssl openssl-devel pcre-devel gd kernel keyutils patch perl    kernel-headers compat* mpfr cpp glibc libgomp libstdc++-devel ppl cloog-ppl keyutils-libs-devel libcom_err-devel libsepol-devel libselinux-   devel krb5-devel zlib-devel libXpm* freetype libjpeg* libpng* php-common php-gd ncurses* libtool* libxml2 libxml2-devel patch

 

5.安装cmake

CMake是一个比make更高级的编译配置工具,它可以根据不同平台、不同的编译器,生成相应的Makefile或者vcproj项目。
通过编写CMakeLists.txt,可以控制生成的Makefile,从而控制编译过程。CMake自动生成的Makefile不仅可以通过make命令构建项目生成目标文件,还支持安装(make install)、测试安装的程序是否能正确执行(make test,或者ctest)、生成当前平台的安装包(make package)、生成源码包(make package_source)、产生Dashboard显示数据并上传等高级功能,只要在CMakeLists.txt中简单配置,就可以完成很多复杂的功能,包括写测试用例。
如果有嵌套目录,子目录下可以有自己的CMakeLists.txt。
总之,CMake是一个非常强大的编译自动配置工具,支持各种平台,KDE也是用它编译的,感兴趣的可以试用一下。

cd /usr/local/src

tar zxvf cmake-2.8.8.tar.gz

cd cmake-2.8.8

./configure

make #编译

make install #安装

 

6.安装mysql

groupadd mysql #添加mysql组

useradd -g mysql mysql -s /bin/false #创建用户mysql并加入到mysql组,不允许mysql用户直接登录系统

mkdir -p /data/mysql #创建MySQL数据库存放目录

chown -R mysql:mysql /data/mysql #设置MySQL数据库目录权限

mkdir -p /usr/local/mysql #创建MySQL安装目录

cd /usr/local/src

tar zxvf mysql-5.5.25a.tar.gz #解压

cd mysql-5.5.25a

cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DMYSQL_DATADIR=/data/mysql -DSYSCONFDIR=/etc #配置

make #编译

make install #安装

cd /usr/local/mysql

cp ./support-files/my-huge.cnf /etc/my.cnf #拷贝配置文件(注意:如果/etc目录下面默认有一个my.cnf,直接覆盖即可)

vi /etc/my.cnf #编辑配置文件,在 [mysqld] 部分增加下面一行

datadir = /data/mysql #添加MySQL数据库路径

:wq! #保存退出

./scripts/mysql_install_db --user=mysql #生成mysql系统数据库

cp ./support-files/mysql.server /etc/rc.d/init.d/mysqld #把Mysql加入系统启动

chmod 755 /etc/init.d/mysqld #增加执行权限

chkconfig mysqld on #加入开机启动

vi /etc/rc.d/init.d/mysqld #编辑

basedir = /usr/local/mysql #MySQL程序安装路径

datadir = /data/mysql #MySQl数据库存放目录

service mysqld start #启动

vi /etc/profile #把mysql服务加入系统环境变量:在最后添加下面这一行

export PATH=$PATH:/usr/local/mysql/bin

:wq! #保存退出

下面这两行把myslq的库文件链接到系统默认的位置,这样你在编译类似PHP等软件时可以不用指定mysql的库文件地址。

ln -s /usr/local/mysql/lib/mysql /usr/lib/mysql

ln -s /usr/local/mysql/include/mysql /usr/include/mysql

shutdown -r now #需要重启系统,等待系统重新启动之后继续在终端命令行下面操作

mysql_secure_installation #设置Mysql密码

根据提示按Y 回车

然后输入2次密码

继续按Y 回车,直到设置完成

或者直接修改密码/usr/local/mysql/bin/mysqladmin -u root -p password "123456" #修改密码

service mysqld restart #重启

到此,mysql安装完成!

7.安装pcre

cd /usr/local/src

mkdir /usr/local/pcre #创建安装目录

tar zxvf pcre-8.31.tar.gz

cd pcre-8.31

./configure --prefix=/usr/local/pcre #配置

make

make install

8.安装 nginx

cd /usr/local/src

groupadd www #添加www组

useradd -g www www -s /bin/false #创建nginx运行账户www并加入到www组,不允许www用户直接登录系统

tar zxvf nginx-1.2.2.tar.gz

cd nginx-1.2.2
./configure --prefix=/usr/local/nginx --without-http_memcached_module --user=www --group=www --with-http_stub_status_module --with-openssl=/usr/ --with-pcre=/usr/local/src/pcre-8.31
注意:--with-pcre=/usr/local/src/pcre-8.31指向的是源码包解压的路径,而不是安装的路径,否则会报错

make

make install

/usr/local/nginx/sbin/nginx #启动nginx

设置nginx开启启动

vi /etc/rc.d/init.d/nginx #编辑启动文件添加下面内容

=======================================================

#!/bin/bash

# nginx Startup script for the Nginx HTTP Server

# it is v.0.0.2 version.

# chkconfig: - 85 15

# description: Nginx is a high-performance web and proxy server.

# It has a lot of features, but it‘s not for everyone.

# processname: nginx

# pidfile: /var/run/nginx.pid

# config: /usr/local/nginx/conf/nginx.conf

nginxd=/usr/local/nginx/sbin/nginx

nginx_config=/usr/local/nginx/conf/nginx.conf

nginx_pid=/usr/local/nginx/logs/nginx.pid

RETVAL=0

prog="nginx"

# Source function library.

. /etc/rc.d/init.d/functions

# Source networking configuration.

. /etc/sysconfig/network

# Check that networking is up.

[ ${NETWORKING} = "no" ] && exit 0

[ -x $nginxd ] || exit 0

# Start nginx daemons functions.

start() {

if [ -e $nginx_pid ];then

echo "nginx already running...."

exit 1

fi

echo -n $"Starting $prog: "

daemon $nginxd -c ${nginx_config}

RETVAL=$?

echo

[ $RETVAL = 0 ] && touch /var/lock/subsys/nginx

return $RETVAL

}

# Stop nginx daemons functions.

stop() {

echo -n $"Stopping $prog: "

killproc $nginxd

RETVAL=$?

echo

[ $RETVAL = 0 ] && rm -f /var/lock/subsys/nginx /usr/local/nginx/logs/nginx.pid

}

reload() {

echo -n $"Reloading $prog: "

#kill -HUP `cat ${nginx_pid}`

killproc $nginxd -HUP

RETVAL=$?

echo

}

# See how we were called.

case "$1" in

start)

start

;;

stop)

stop

;;

reload)

reload

;;

restart)

stop

start

;;

status)

status $prog

RETVAL=$?

;;

*)

echo $"Usage: $prog {start|stop|restart|reload|status|help}"

exit 1

esac

exit $RETVAL

=======================================================

:wq! #保存退出

chmod 775 /etc/rc.d/init.d/nginx #赋予文件执行权限

chkconfig nginx on #设置开机启动

/etc/rc.d/init.d/nginx restart #重启

service nginx restart

9.安装libmcrypt

cd /usr/local/src

tar zxvf libmcrypt-2.5.8.tar.gz #解压

cd libmcrypt-2.5.8 #进入目录

./configure #配置

make #编译

make install #安装

 

10.安装php

cd /usr/local/src

tar -zvxf php-5.4.5.tar.gz

cd php-5.4.5

mkdir -p /usr/local/php5 #建立php安装目录
./configure --prefix=/usr/local/php5 --with-config-file-path=/usr/local/php5/etc --with-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-mysql-sock=/tmp/mysql.sock --with-gd --with-iconv --with-zlib --enable-xml --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curlwrappers --enable-mbregex --enable-fpm --enable-mbstring --enable-ftp --enable-gd-native-ttf --with-openssl --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip --enable-soap --without-pear --with-gettext --enable-session --with-mcrypt --with-curl #配置
make #编译

make install #安装

cp php.ini-production /usr/local/php5/etc/php.ini #复制php配置文件到安装目录

rm -rf /etc/php.ini #删除系统自带配置文件

ln -s /usr/local/php5/etc/php.ini /etc/php.ini #添加软链接

cp /usr/local/php5/etc/php-fpm.conf.default /usr/local/php5/etc/php-fpm.conf #拷贝模板文件为php-fpm配置文件

vi /usr/local/php5/etc/php-fpm.conf #编辑

user = www #设置php-fpm运行账号为www

group = www #设置php-fpm运行组为www

pid = run/php-fpm.pid #取消前面的分号

设置 php-fpm开机启动

cp /usr/local/src/php-5.4.5/sapi/fpm/init.d.php-fpm /etc/rc.d/init.d/php-fpm #拷贝php-fpm到启动目录

chmod +x /etc/rc.d/init.d/php-fpm #添加执行权限

chkconfig php-fpm on #设置开机启动

vi /usr/local/php5/etc/php.ini #编辑配置文件

找到:disable_functions =

修改为:
disable_functions = passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server,escapeshellcmd,dll,popen,disk_free_space,checkdnsrr,checkdnsrr,getservbyname,getservbyport,disk_total_space,posix_ctermid,posix_get_last_error,posix_getcwd, posix_getegid,posix_geteuid,posix_getgid, posix_getgrgid,posix_getgrnam,posix_getgroups,posix_getlogin,posix_getpgid,posix_getpgrp,posix_getpid, posix_getppid,posix_getpwnam,posix_getpwuid, posix_getrlimit, posix_getsid,posix_getuid,posix_isatty, posix_kill,posix_mkfifo,posix_setegid,posix_seteuid,posix_setgid, posix_setpgid,posix_setsid,posix_setuid,posix_strerror,posix_times,posix_ttyname,posix_uname
 

#列出PHP可以禁用的函数,如果某些程序需要用到这个函数,可以删除,取消禁用。

找到:;date.timezone =

修改为:date.timezone = PRC #设置时区

找到:expose_php = On

修改为:expose_php = OFF #禁止显示php版本的信息

找到:short_open_tag = Off

修改为:short_open_tag = ON #支持php短标签

 

11.配置nginx支持php

vi /usr/local/nginx/conf/nginx.conf #编辑配置文件,需做如下修改

user www www; #首行user去掉注释,修改Nginx运行组为www www;必须与/usr/local/php5/etc/php-fpm.conf中的user,group配置相同,否则php运行出错

index index.php index.html index.htm; #添加index.php

# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000

#

location ~ \.php$ {

root html;

fastcgi_pass 127.0.0.1:9000;

fastcgi_index index.php;

fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;

include fastcgi_params;

}

#取消FastCGI server部分location的注释,并要注意fastcgi_param行的参数,改为$document_root$fastcgi_script_name,或者使用绝对路径

/etc/init.d/nginx restart #重启nginx

这里是我的一个完整配置

user www www;
worker_processes  1;

#error_log  logs/error.log;
#error_log  logs/error.log  notice;
#error_log  logs/error.log  info;

#pid        logs/nginx.pid;


events {
    worker_connections  1024;
}


http {
    include       mime.types;
    default_type  application/octet-stream;

    #log_format  main  $remote_addr - $remote_user [$time_local] "$request" 
    #                  $status $body_bytes_sent "$http_referer" 
    #                  "$http_user_agent" "$http_x_forwarded_for";

    #access_log  logs/access.log  main;

    sendfile        on;
    #tcp_nopush     on;

    #keepalive_timeout  0;
    keepalive_timeout  65;

    #gzip  on;

    server {
        listen       80;
        server_name  localhost;

        #charset koi8-r;

        #access_log  logs/host.access.log  main;

        location / {
            root   /data/blog;
        index index.php index.html index.htm;
        }

        #error_page  404              /404.html;

        # redirect server error pages to the static page /50x.html
        #
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        }

        # proxy the PHP scripts to Apache listening on 127.0.0.1:80
        #
        #location ~ \.php$ {
        #    proxy_pass   http://127.0.0.1;
        #}

    location ~ .*\.php$
        {
                include fastcgi.conf;

                fastcgi_pass  127.0.0.1:9000;

                fastcgi_index index.php;

                fastcgi_param  SCRIPT_FILENAME  /data/blog$fastcgi_script_name;

                include fastcgi_params;

                expires off;

        }
        # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
        #

        # deny access to .htaccess files, if Apaches document root
        # concurs with nginxs one
        #
        #location ~ /\.ht {
        #    deny  all;
        #}
    }


    # another virtual host using mix of IP-, name-, and port-based configuration
    #
    #server {
    #    listen       8000;
    #    listen       somename:8080;
    #    server_name  somename  alias  another.alias;

    #    location / {
    #        root   html;
    #        index  index.html index.htm;
    #    }
    #}


    # HTTPS server
    #
    #server {
    #    listen       443;
    #    server_name  localhost;

    #    ssl                  on;
    #    ssl_certificate      cert.pem;
    #    ssl_certificate_key  cert.key;

    #    ssl_session_timeout  5m;

    #    ssl_protocols  SSLv2 SSLv3 TLSv1;
    #    ssl_ciphers  HIGH:!aNULL:!MD5;
    #    ssl_prefer_server_ciphers   on;

    #    location / {
    #        root   html;
    #        index  index.html index.htm;
    #    }
    #}

}

 

11.测试

我在nginx配置里指向的服务器根目录是

/data/blog

所以

  cd /data/blog#进入网站默认网站根目录

vi index.php #编辑

<?php

phpinfo();

?>

 

:wq! #保存退出

chown www.www /usr/local/nginx/html/ -R #设置目录所有者

chmod 700 /usr/local/nginx/html/ -R #设置目录权限

shutdown -r now #重启系统

在浏览器中打开服务器IP地址,会看到一个php输出信息界面,配置成功

 

12.服务器相关操作命令

service nginx restart #重启nginx

service mysqld restart #重启mysql

/usr/local/php5/sbin/php-fpm #启动php-fpm

/etc/rc.d/init.d/php-fpm restart #重启php-fpm

/etc/rc.d/init.d/php-fpm stop #停止php-fpm

/etc/rc.d/init.d/php-fpm start #启动php-fpm

备注:

nginx默认站点目录是:/usr/local/nginx/html/

权限设置:chown www:www /usr/local/nginx/html/ -R

MySQL数据库目录是:/data/mysql

权限设置:chown mysql.mysql -R /data/mysql

 

 

centos 6.3 编译安装 nginx +mysql + php,布布扣,bubuko.com

centos 6.3 编译安装 nginx +mysql + php

标签:des   style   blog   http   color   使用   os   io   

原文地址:http://www.cnblogs.com/lycokcc/p/3913052.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!