# -*- coding:UTF-8 -*- import numpy as np import matplotlib.pyplot as plt from matplotlib.ticker import MultipleLocator from pylab import mpl import sys reload(sys) sys.setdefaultencoding(‘utf8‘) xmajorLocator = MultipleLocator(10* 1) #将x轴主刻度标签设置为10* 1的倍数 ymajorLocator = MultipleLocator(0.1* 1) #将y轴主刻度标签设置为0.1 * 1的倍数 # 设置中文字体 mpl.rcParams[‘font.sans-serif‘] = [‘SimHei‘] # 导入文件数据 #data = np.loadtxt(‘test44.txt‘, delimiter=None, dtype=float ) #data = [[1,2],[3,4],[5,6]] data = [[1,5,10,20,30,40,50,60,70,80,90,100],[0.0201,0.0262,0.0324,0.0295,0.0221,0.0258,0.0254,0.0299,0.0275,0.0299,0.0291,0.0328], [0.0193,0.0254,0.0234,0.0684,0.0693,0.0803,0.1008,0.098,0.0947,0.0934,0.1971,0.2123],[0.0209,0.1176,0.2143,0.2295,0.4176,0.5258,0.6471,0.6484,0.8193,0.829,0.832,0.943]] data = np.array(data) # 截取数组数据 x = data[0] #时间 y = data[1] # 类别一的Y值 y2 = data[2] #类别二的Y值 y3 = data[3] #类别三的Y值 plt.figure(num=1, figsize=(8, 6)) ax = plt.subplot(111) ax.xaxis.set_major_locator(xmajorLocator) ax.yaxis.set_major_locator(ymajorLocator) ax.xaxis.grid(True, which=‘major‘) #x坐标轴的网格使用主刻度 ax.yaxis.grid(True, which=‘major‘) #x坐标轴的网格使用主刻度 plt.xlabel(‘时间/t‘,fontsize=‘xx-large‘)#Valid font size are large, None, medium, smaller, small, x-large, xx-small, larger, x-small, xx-large plt.ylabel(‘y-label‘,fontsize=‘xx-large‘) plt.title(‘Title‘,fontsize=‘xx-large‘) plt.xlim(0, 110) plt.ylim(0, 1) line1, = ax.plot(x, y, ‘g.-‘,label="类别一",) line2, = ax.plot(x,y2,‘b*-‘,label="类别二",) line3, = ax.plot(x,y3,‘rD-‘,label="类别三",) ax.legend((line1, line2,line3),(‘类别一‘,‘类别二‘,‘类别三‘),loc=5) # loc可为1、2、3、4、5、6，分别为不同的位置 plt.show()
本文出自 “lefteva” 博客，请务必保留此出处http://lefteva.blog.51cto.com/11892835/1871878
原文地址：http://lefteva.blog.51cto.com/11892835/1871878
