标签：uname eve gcc addition ini shm byte swa install
1.切换至root用户
2.uname -a/-m grep MemTotal /proc/meminfo grep SwapTotal /proc/meminfo free -m
3.df -h /tmp 至少1G空间
4.查看安装依赖软件 rpm -q package_name
binutils-2.23.52.0.1-12.el7.x86_64 compat-libcap1-1.10-3.el7.x86_64 compat-libstdc++-33-3.2.3-71.el7.i686 compat-libstdc++-33-3.2.3-71.el7.x86_64 gcc-4.8.2-3.el7.x86_64 gcc-c++-4.8.2-3.el7.x86_64 glibc-2.17-36.el7.i686 glibc-2.17-36.el7.x86_64 glibc-devel-2.17-36.el7.i686 glibc-devel-2.17-36.el7.x86_64 ksh libaio-0.3.109-9.el7.i686 libaio-0.3.109-9.el7.x86_64 libaio-devel-0.3.109-9.el7.i686 libaio-devel-0.3.109-9.el7.x86_64 libgcc-4.8.2-3.el7.i686 libgcc-4.8.2-3.el7.x86_64 libstdc++-4.8.2-3.el7.i686 libstdc++-4.8.2-3.el7.x86_64 libstdc++-devel-4.8.2-3.el7.i686 libstdc++-devel-4.8.2-3.el7.x86_64 libXi-1.7.2-1.el7.i686 libXi-1.7.2-1.el7.x86_64 libXtst-1.2.2-1.el7.i686 libXtst-1.2.2-1.el7.x86_64 make-3.82-19.el7.x86_64 sysstat-10.1.5-1.el7.x86_64unixODBC-2.3.1-6.el7.x86_64 or laterunixODBC-2.3.1-6.el7.i686 or laterunixODBC-devel-2.3.1-6.el7.x86_64 or laterunixODBC-devel-2.3.1-6.el7.i686 or later
pam
5.添加用户及用户组
# /usr/sbin/groupadd oinstall # /usr/sbin/groupadd dba
# id oracle
# /usr/sbin/useradd -g oinstall -G dba oracle
# passwd oracle
6.修改内核参数
| Minimum Value | File | |
|---|---|---|
semmsl
|
250
32000 100 128 |
/proc/sys/kernel/sem |
shmall |
2097152 | /proc/sys/kernel/shmall |
shmmax |
Minimum: 536870912
Maximum: A value that is 1 byte less than the physical memory Recommended: More than half the physical memory See My Oracle Support Note 567506.1 for additional information about configuring |
/proc/sys/kernel/shmmax |
shmmni |
4096 | /proc/sys/kernel/shmmni |
file-max |
6815744 | /proc/sys/fs/file-max |
ip_local_port_range |
Minimum: 9000
Maximum: 65500 |
/proc/sys/net/ipv4/ip_local_port_range |
rmem_default |
262144 | /proc/sys/net/core/rmem_default |
rmem_max |
4194304 | /proc/sys/net/core/rmem_max |
wmem_default |
262144 | /proc/sys/net/core/wmem_default |
wmem_max |
1048576 | /proc/sys/net/core/wmem_max |
aio-max-nr |
1048576
Note: This value limits concurrent outstanding requests and should be set to avoid I/O subsystem failures. |
/proc/sys/fs/aio-max-nr |
| Command | |
|---|---|
semmsl, semmns, semopm, and semmni |
# /sbin/sysctl -a | grep sem
This command displays the value of the semaphore parameters in the order listed. |
shmall, shmmax, and shmmni |
# /sbin/sysctl -a | grep shm |
file-max |
# /sbin/sysctl -a | grep file-max |
ip_local_port_range |
# /sbin/sysctl -a | grep ip_local_port_range |
rmem_default |
# /sbin/sysctl -a | grep rmem_default |
rmem_max |
# /sbin/sysctl -a | grep rmem_max |
wmem_default |
# /sbin/sysctl -a | grep wmem_default |
wmem_max |
# /sbin/sysctl -a | grep wmem_max |
不符合要求的,需要按照下面的格式修改/etc/sysctl.conf文件fs.aio-max-nr = 1048576 fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
使用下面的命令使修改的内核参数生效
# /sbin/sysctl -p
标签：uname eve gcc addition ini shm byte swa install
原文地址：http://www.cnblogs.com/offgoing/p/6062751.html
