标签：height png 使用 cli 默认 click 关系 提醒 dex
首先，在正式使用Masonry之前,我们先来看看在xib中我们是如何使用AutoLayout
从图中我们可以看出,只要设置相应得局限，控制好父视图与子视图之间的关系就应该很ok的拖出你需要的需求。这里就不详细讲解具体拖拽的方法.....
然后,我们按着上图的属性来看看如何简单得使用Masonry
这里是Masonry给我们的属性
@property (nonatomic, strong, readonly) MASConstraint *left; //左侧
@property (nonatomic, strong, readonly) MASConstraint *top; //上侧
@property (nonatomic, strong, readonly) MASConstraint *right; //右侧
@property (nonatomic, strong, readonly) MASConstraint *bottom; //下侧
@property (nonatomic, strong, readonly) MASConstraint *leading; //首部
@property (nonatomic, strong, readonly) MASConstraint *trailing; //尾部
@property (nonatomic, strong, readonly) MASConstraint *width; //宽
@property (nonatomic, strong, readonly) MASConstraint *height; //高
@property (nonatomic, strong, readonly) MASConstraint *centerX; //横向居中
@property (nonatomic, strong, readonly) MASConstraint *centerY; //纵向居中
@property (nonatomic, strong, readonly) MASConstraint *baseline; //文本基线
属性有了,接着我们应该怎么在视图中添加约束呢，Masonry给我们提供了3个方法
//新增约束
- (NSArray *)mas_makeConstraints:(void(^)(MASConstraintMaker *make))block;//更新约束
- (NSArray *)mas_updateConstraints:(void(^)(MASConstraintMaker *make))block;//清楚之前的所有约束,只会保留最新的约束
- (NSArray *)mas_remakeConstraints:(void(^)(MASConstraintMaker *make))block;
合理的利用这个3个函数，基本上可以应对任何情况了
准备工作已经完成，我们来看几个小demo
1.居中一个view
// 防止block中的循环引用
__weak typeof (self) weakSelf = self;
// 初始化一个View
UIView *bgView = [[UIView alloc]init];
bgView.backgroundColor = [UIColor redColor];
[self.view addSubview:bgView];
// 使用mas_makeConstraints添加约束
[bgView mas_makeConstraints:^(MASConstraintMaker *make) {
make.center.equalTo(weakSelf.view);
make.size.mas_equalTo(CGSizeMake(200, 200));
}]；
是不是很简单，这里有一点要必须注意下，添加约束前必须要把view添加到视图上。
那我要是不想固定他得宽高呢，让view的大小根据间距来控制怎么做
我们来设置一个基于父视图间距为10的view
[bgView mas_makeConstraints:^(MASConstraintMaker *make) {
make.center.equalTo(weakSelf.view);
make.edges.mas_offset(UIEdgeInsetsMake(10, 10, 10, 10));
}]；
这样就ok了！！！
make.edges.mas_offset(UIEdgeInsetsMake(10, 10, 10, 10));
等同于
make.top.equalTo(weakSelf.view).with.offset(10);
make.left.equalTo(weakSelf.view).with.offset(10);
make.bottom.equalTo(weakSelf.view).with.offset(-10);
make.right.equalTo(weakSelf.view).with.offset(-10);
2.多个view
2个view横向居中，第二个view距离第一个view间距为10
UIView *view1 = [[UIButton alloc]init];
view1.backgroundColor = [UIColor redColor];
[self.view addSubview:view1];
[view1 mas_makeConstraints:^(MASConstraintMaker *make) {
make.size.mas_equalTo(CGSizeMake(90, 90));
make.centerX.equalTo(weakSelf.view);
make.top.width.offset(90);
}];
UIView *view2 = [[UILabel alloc]init];
view2.backgroundColor = [UIColor yellowColor];
[self.view addSubview:view2];
[view2 mas_makeConstraints:^(MASConstraintMaker *make) {
make.size.mas_equalTo(CGSizeMake(100, 100));
make.centerX.equalTo(view1);
make.top.equalTo(view1.mas_bottom).with.offset(20);
}];
大家有没有看到第二个view代码中
make.top.equalTo(view1.mas_bottom).with.offset(20);
view1.mas_bottom 是什么意思呢？如果只写view1，Masonry会默认是view1中最上面开始算起，也就是view2 间距view1 Y轴开始20的间距
通过这个也就可以很方便的设置view同另一个view之间上下左右的间距了
大家不妨试试view.mas_top view.mas_left view.mas_right 的效果是什么样得了
下面我附上一个完整的界面demo,大家可以看看
代码如下：
- (void)setupFrame {
__weak typeof(self) weakSelf = self;
//上传头像
UIButton *iconBtn = [[UIButton alloc]init];
[iconBtn setCornerRadius:45];
[iconBtn setBackgroundImage:[UIImage imageNamed:@"huantouxiang"] forState:UIControlStateNormal];
[iconBtn addTarget:self action:@selector(iconButton) forControlEvents:UIControlEventTouchDown];
[self.view addSubview:iconBtn];
self.iconBtn = iconBtn;
[self.iconBtn mas_makeConstraints:^(MASConstraintMaker *make) {
make.size.mas_equalTo(CGSizeMake(90, 90));
make.centerX.equalTo(weakSelf.view);
make.top.width.offset(90);
}];
//上传社区头像文字提醒
UILabel *iconLabel = [[UILabel alloc]init];
iconLabel.textColor = c3;
iconLabel.text = @"上传社团头像";
iconLabel.font = [UIFont systemFontOfSize:15];
[self.view addSubview:iconLabel];
[iconLabel mas_makeConstraints:^(MASConstraintMaker *make) {
make.centerX.equalTo(iconBtn);
make.top.equalTo(iconBtn.mas_bottom).with.offset(20);
}];
//社团编辑图标
UIImageView *editIcon = [[UIImageView alloc]init];
editIcon.image = [UIImage imageNamed:@"bianxie"];
[self.view addSubview:editIcon];
[editIcon mas_makeConstraints:^(MASConstraintMaker *make) {
make.size.mas_equalTo(CGSizeMake(25, 20));
make.left.equalTo(weakSelf.view).with.offset(10);
make.top.equalTo(iconLabel.mas_bottom).with.offset(30);
}];
//社团名
UITextField *nameText = [[UITextField alloc]init];
nameText.placeholder = @"请填写社区名(社团名最多6个字)";
[self.view addSubview:nameText];
self.nameText = nameText;
[nameText mas_makeConstraints:^(MASConstraintMaker *make) {
make.height.mas_equalTo(@20);
make.centerY.equalTo(editIcon);
make.right.equalTo(weakSelf.view).with.offset(-10);
make.left.equalTo(editIcon.mas_right).with.offset(5);
}];
//分割线
UIImageView *xian = [[UIImageView alloc]init];
xian.backgroundColor = DBColor(226, 226, 226);
[self.view addSubview:xian];
[xian mas_makeConstraints:^(MASConstraintMaker *make) {
make.height.mas_equalTo(@1);
make.left.equalTo(weakSelf.view).with.offset(10);
make.right.equalTo(weakSelf.view).with.offset(-10);
make.top.equalTo(editIcon.mas_bottom).with.offset(5);
}];
//选择标签
UILabel *tagLabel = [[UILabel alloc]init];
tagLabel.text = @"选择标签";
tagLabel.textColor = c3;
tagLabel.font = [UIFont systemFontOfSize:15];
[self.view addSubview:tagLabel];
[tagLabel mas_makeConstraints:^(MASConstraintMaker *make) {
make.height.mas_equalTo(@20);
make.width.mas_equalTo(@60);
make.left.equalTo(weakSelf.view).with.offset(10);
make.top.equalTo(xian).with.offset(35);
}];
//跳转标签选择
UITextField *tagText = [[UITextField alloc]init];
tagText.placeholder = @"美容颜";
tagText.borderStyle=UITextBorderStyleRoundedRect;
tagText.delegate = self;
[tagText addTarget:self action:@selector(textTag) forControlEvents:UIControlEventTouchDown];
[self.view addSubview:tagText];
[tagText mas_makeConstraints:^(MASConstraintMaker *make) {
make.centerY.equalTo(tagLabel);
make.right.equalTo(weakSelf.view).with.offset(-10);
make.left.equalTo(tagLabel.mas_right).with.offset(5);
}];
//tagView
self.tagView = ({
SKTagView *view = [SKTagView new];
view.backgroundColor = [UIColor clearColor];
view.padding = UIEdgeInsetsMake(0, 0, 0, 0);
view.insets = 15;
view.lineSpace = 10;
__weak SKTagView *weakView = view;
view.didClickTagAtIndex = ^(NSUInteger index){
//Remove tag
[weakView removeTagAtIndex:index];
};
view;
});
[self.view addSubview:self.tagView];
[self.tagView mas_makeConstraints:^(MASConstraintMaker *make) {
make.left.equalTo(weakSelf.view).with.offset(10);
make.right.equalTo(weakSelf.view).with.offset(-10);
make.top.equalTo(tagText.mas_bottom).with.offset(10);
}];
//label标识语
UILabel *label = [[UILabel alloc]init];
label.font = [UIFont systemFontOfSize:13];
label.textColor = [UIColor redColor];
label.text = @"PS:成员和视频越多得社团越容易被发现!";
[self.view addSubview:label];
[label mas_makeConstraints:^(MASConstraintMaker *make) {
make.left.equalTo(weakSelf.view).with.offset(10);
make.right.equalTo(weakSelf.view).with.offset(-10);
make.top.equalTo(self.tagView.mas_bottom).with.offset(20);
}];
UIButton *commitBtn = [[UIButton alloc]init];
[commitBtn setCornerRadius:5];
[commitBtn setBorderWidth:1 color:DBTextThemeColor];
[commitBtn setTitleColor:DBTextThemeColor forState:UIControlStateNormal];
commitBtn.titleLabel.font = [UIFont systemFontOfSize:15];
[commitBtn setTitle:@"确认发布" forState:UIControlStateNormal];
[commitBtn addTarget:self action:@selector(commitButton) forControlEvents:UIControlEventTouchDown];
[self.view addSubview:commitBtn];
[commitBtn mas_makeConstraints:^(MASConstraintMaker *make) {
make.height.mas_equalTo(@30);
make.left.equalTo(weakSelf.view).with.offset(10);
make.right.equalTo(weakSelf.view).with.offset(-10);
make.top.equalTo(label.mas_bottom).with.offset(50);
}];
}
标签：height png 使用 cli 默认 click 关系 提醒 dex
原文地址：http://www.cnblogs.com/diweinan/p/6214269.html
