标签：percona-xtradb-cluster+haproxy+keepalived 编译安装
系统：centos7
192.168.1.55 mysql 端口3306 Percona-XtraDB-Cluster 主节点
192.168.1.56 mysql端口3307 Percona-XtraDB-Cluster+haproxy+keepalived
192.168.1.57 MySQL端口3307 Percona-XtraDB-Cluster+haproxy+keepalived
192.168.4.58/21 vip ip
软件版本：Percona-XtraDB-Cluster-5.7.16-27.19 percona-xtrabackup-2.4.5
haproxy-1.7.0 keepalived-1.3.2
一、linux 系统限制配置
1、关闭系统防火墙
systemctl stop firewalld.service 关闭防火墙 systemctl disable firewalld.service 禁用防火墙
2、关闭SElinux sed -i ‘s/SELINUX=.*/SELINUX=disabled/g‘ /etc/selinux/config setenforce 0 selinux 立即生效
二、系统安装约定
源码包编译安装位置：/usr/local/软件名字
数据目录 /apps/data
三、下在源码安装包
下载 Percona-XtraDB-Cluster-5.7.16-27.19
wget -P /usr/local/srchttps://www.percona.com/downloads/Percona-XtraDB-Cluster-57/Percona-XtraDB-Cluster-5.7.16-27.19/rel-5.7.16/source/tarball/Percona-XtraDB-Cluster-5.7.16-27.19.tar.gz
下载percona-xtrabackup-2.4.5
wget -P /usr/local/src https://www.percona.com/downloads/XtraBackup/Percona-XtraBackup-2.4.5/source/tarball/percona-xtrabackup-2.4.5.tar.gz
下载boost_1_59_0
mkdir -p /usr/local/boost wget -P /usr/local/boost
下载haproxy-1.7.0
wget -P /usr/local/src http://www.haproxy.org/download/1.7/src/haproxy-1.7.0.tar.gz
下载keepalived-1.3.2
wget -P /usr/local/src http://www.keepalived.org/software/keepalived-1.3.2.tar.gz
下载automake-1.15
wget -P /usr/local/src ftp://ftp.gnu.org/gnu/automake/automake-1.15.tar.gz
四、安装编译环境及编译依赖
1、yum -y install epel-release 2、卸载旧版mysql或mariadb yum -y remove mariadb* mysql* 3、安装编译环境 yum -y install libtool ncurses-devel libgcrypt-devel libev-devel git scons gcc gcc-c++ openssl check cmake bison boost-devel asio-devel libaio-devel ncurses-devel readline-devel pam-devel socat libaio automake autoconf vim redhat-lsb check-devel curl curl-devel xinetd 4、安装keepalived 依赖 （192.168.1.56 192.168.1.57） yum -y install libnl-devel openssl-devel libnfnetlink-devel ipvsadm popt-devel libnfnetlink kernel-devel popt-static iptraf
五、编译安装 Percona-XtraDB-Cluster-5.7.16-27.19 percona-xtrabackup-2.4.5
1、解压percona-xtrabackup-2.4.5.tar.gz
tar -xvf /usr/local/src/percona-xtrabackup-2.4.5.tar.gz -C /usr/local/src/
2、解压Percona-XtraDB-Cluster-5.7.16-27.19.tar.gz
tar -xvf /usr/local/src/Percona-XtraDB-Cluster-5.7.16-27.19.tar.gz -C /usr/local/src/
3、编译percona-xtrabackup-2.4.5
cd /usr/local/src/percona-xtrabackup-2.4.5/ cmake ./ -DBUILD_CONFIG=xtrabackup_release -DWITH_MAN_PAGES=OFF -DDOWNLOAD_BOOST=1 -DWITH_BOOST="/usr/local/boost" make -j4 && make install ln -sf /usr/local/xtrabackup/bin/* /usr/sbin/
4、编译安装Percona-XtraDB-Cluster-5.7.16-27.19
4.1、创建mysql用户名及文件夹
mkdir /apps/{run,log}/mysqld -p
useradd mysql -s /sbin/nologin -M
chown -R mysql:mysql /apps4.2、编译garbd,libgalera_smm.so
cd /usr/local/src/Percona-XtraDB-Cluster-5.7.16-27.19
cd "percona-xtradb-cluster-galera"
revno值 cat GALERA-REVISION
scons -j4 psi=1 --config=force revno="b98f92f" boost_pool=0 libgalera_smm.so
scons -j4 --config=force revno="b98f92f" garb/garbd
创建pxc安装目录
mkdir -p /usr/local/Percona-XtraDB-Cluster/{bin,lib}
拷贝编译结果文件到pxc安装目录
cp garb/garbd /usr/local/Percona-XtraDB-Cluster/bin
cp libgalera_smm.so /usr/local/Percona-XtraDB-Cluster/lib4.3、编译 Percona-XtraDB-Cluster-5.7.16-27.19
-DMYSQL_SERVER_SUFFIX 值得获取 cd /usr/local/src/Percona-XtraDB-Cluster-5.7.16-27.19 WSREP_VERSION="$(grep WSREP_INTERFACE_VERSION wsrep/wsrep_api.h | cut -d ‘"‘ -f2).$(grep ‘SET(WSREP_PATCH_VERSION‘ "cmake/wsrep.cmake" | cut -d ‘"‘ -f2)" echo $WSREP_VERSION -DCOMPILATION_COMMENT 值获取 cd /usr/local/src/Percona-XtraDB-Cluster-5.7.16-27.19 source VERSION MYSQL_VERSION="$MYSQL_VERSION_MAJOR.$MYSQL_VERSION_MINOR.$MYSQL_VERSION_PATCH" echo $MYSQL_VERSION REVISION="$(cd "$SOURCEDIR"; grep ‘^short: ‘ Docs/INFO_SRC |sed -e ‘s/short: //‘)" -DCOMPILATION_COMMENT 值 Percona XtraDB Cluster binary (GPL) $MYSQL_VERSION-$WSREP_VERSION Revision $REVISION 编译Percona-XtraDB-Cluster-5.7.16-27.19 cd /usr/local/src/Percona-XtraDB-Cluster-5.7.16-27.19 cmake ./ -DBUILD_CONFIG=mysql_release -DCMAKE_BUILD_TYPE=RelWithDebInfo -DWITH_EMBEDDED_SERVER=OFF -DFEATURE_SET=community -DENABLE_DTRACE=OFF -DWITH_SSL=system -DWITH_ZLIB=system -DCMAKE_INSTALL_PREFIX="/usr/local/Percona-XtraDB-Cluster" -DMYSQL_DATADIR="/apps/data" -DMYSQL_SERVER_SUFFIX="27.19" -DWITH_INNODB_DISALLOW_WRITES=ON -DWITH_WSREP=ON -DWITH_UNIT_TESTS=0 -DWITH_READLINE=system -DWITHOUT_TOKUDB=ON -DCOMPILATION_COMMENT="Percona XtraDB Cluster binary (GPL) 5.7.16-27.19, Revision bec0879" -DWITH_PAM=ON -DWITH_INNODB_MEMCACHED=ON -DDOWNLOAD_BOOST=1 -DWITH_BOOST="/usr/local/boost" -DWITH_SCALABILITY_METRICS=ON make -j4 && make install 拷贝文件到安装目录 cp -R /usr/local/src/Percona-XtraDB-Cluster-5.7.16-27.19/percona-xtradb-cluster-tests /usr/local/Percona-XtraDB-Cluster/ 创建软连接 mysql 系统环境 ln -sf /usr/local/Percona-XtraDB-Cluster/bin/* /usr/sbin/ 拷贝启动文件到系统启动目录 cp -R /usr/local/Percona-XtraDB-Cluster/support-files/mysql.server /etc/init.d/mysqld 拷贝监控文件到xinetd管理目录 cp -R /usr/local/Percona-XtraDB-Cluster/xinetd.d/mysqlchk /etc/xinetd.d/ 加入动态库 echo "/usr/local/Percona-XtraDB-Cluster/lib" >> /etc/ld.so.conf ldconfig
4.4 配置MySQL健康检查
vim /etc/xinetd.d/mysqlchk server = /usr/bin/clustercheck 修改为如果不修过可以cp /usr/local/Percona-XtraDB-Cluster/bin/clustercheck 到 /usr/bin/ server = /usr/sbin/clustercheck vim /etc/services 添加 mysqlchk 9200/tcp # mysqlchk
4.5my.cnf 配置
192.168.1.55 vim /etc/my.cnf # Template my.cnf for PXC # Edit to your requirements. [client] socket=/apps/data/mysql.sock port=3306 [mysqld] user=mysql server-id=10055 datadir=/apps/data socket=/apps/data/mysql.sock log-error=/apps/log/mysqld/mysqld.log pid-file=/apps/run/mysqld/mysqld.pid log-bin log_slave_updates expire_logs_days=7 port=3306 character_set_server = utf8 # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 # Path to Galera library wsrep_provider=/usr/local/Percona-XtraDB-Cluster/lib/libgalera_smm.so # Cluster connection URL contains IPs of nodes #If no IP is found, this implies that a new cluster needs to be created, #in order to do that you need to bootstrap this node wsrep_cluster_address=‘gcomm://192.168.1.55,192.168.1.56,192.168.1.57‘ #wsrep_cluster_address=gcomm:// # In order for Galera to work correctly binlog format should be ROW binlog_format=ROW # MyISAM storage engine has only experimental support default_storage_engine=InnoDB wsrep_sst_receive_address=192.168.1.55:6010 wsrep_node_incoming_address=192.168.1.55 wsrep_provider_options = "gmcast.listen_addr=tcp://192.168.1.55;ist.recv_addr=192.168.1.55:6020;" # Slave thread to use wsrep_slave_threads= 8 wsrep_log_conflicts # This changes how InnoDB autoincrement locks are managed and is a requirement for Galera innodb_autoinc_lock_mode=2 # Node IP address wsrep_node_address=192.168.1.55 # Cluster name wsrep_cluster_name=pxc-cluster #If wsrep_node_name is not specified, then system hostname will be used wsrep_node_name=pxc-cluster-node-1 #pxc_strict_mode allowed values: DISABLED,PERMISSIVE,ENFORCING,MASTER pxc_strict_mode=ENFORCING # SST method wsrep_sst_method=xtrabackup-v2 #wsrep_sst_method=rsync #Authentication for SST method # 修改自己的创建的账号、密码 wsrep_sst_auth="sstuser:456789"
192.168.1.56 vim /etc/my.cnf # Template my.cnf for PXC # Edit to your requirements. [client] socket=/apps/data/mysql.sock port=3307 [mysqld] user=mysql server-id=10056 datadir=/apps/data socket=/apps/data/mysql.sock log-error=/apps/log/mysqld/mysqld.log pid-file=/apps/run/mysqld/mysqld.pid log-bin log_slave_updates expire_logs_days=7 port=3307 character_set_server = utf8 # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 # Path to Galera library wsrep_provider=/usr/local/Percona-XtraDB-Cluster/lib/libgalera_smm.so # Cluster connection URL contains IPs of nodes #If no IP is found, this implies that a new cluster needs to be created, #in order to do that you need to bootstrap this node wsrep_cluster_address=‘gcomm://192.168.1.55,192.168.1.56,192.168.1.57‘ #wsrep_cluster_address=gcomm:// # In order for Galera to work correctly binlog format should be ROW binlog_format=ROW # MyISAM storage engine has only experimental support default_storage_engine=InnoDB wsrep_sst_receive_address=192.168.1.56:6010 wsrep_node_incoming_address=192.168.1.56 wsrep_provider_options = "gmcast.listen_addr=tcp://192.168.1.56;ist.recv_addr=192.168.1.56:6020;" # Slave thread to use wsrep_slave_threads= 8 wsrep_log_conflicts # This changes how InnoDB autoincrement locks are managed and is a requirement for Galera innodb_autoinc_lock_mode=2 # Node IP address wsrep_node_address=192.168.1.56 # Cluster name wsrep_cluster_name=pxc-cluster #If wsrep_node_name is not specified, then system hostname will be used wsrep_node_name=pxc-cluster-node-2 #pxc_strict_mode allowed values: DISABLED,PERMISSIVE,ENFORCING,MASTER pxc_strict_mode=ENFORCING # SST method wsrep_sst_method=xtrabackup-v2 #wsrep_sst_method=rsync #Authentication for SST method # 修改自己的创建的账号、密码 wsrep_sst_auth="sstuser:456789"
192.168.1.57 vim /etc/my.cnf # Template my.cnf for PXC # Edit to your requirements. [client] socket=/apps/data/mysql.sock port=3307 [mysqld] user=mysql server-id=10057 datadir=/apps/data socket=/apps/data/mysql.sock log-error=/apps/log/mysqld/mysqld.log pid-file=/apps/run/mysqld/mysqld.pid log-bin log_slave_updates expire_logs_days=7 port=3307 character_set_server = utf8 # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 # Path to Galera library wsrep_provider=/usr/local/Percona-XtraDB-Cluster/lib/libgalera_smm.so # Cluster connection URL contains IPs of nodes #If no IP is found, this implies that a new cluster needs to be created, #in order to do that you need to bootstrap this node wsrep_cluster_address=‘gcomm://192.168.1.55,192.168.1.56,192.168.1.57‘ #wsrep_cluster_address=gcomm:// # In order for Galera to work correctly binlog format should be ROW binlog_format=ROW # MyISAM storage engine has only experimental support default_storage_engine=InnoDB wsrep_sst_receive_address=192.168.1.57:6010 wsrep_node_incoming_address=192.168.1.57 wsrep_provider_options = "gmcast.listen_addr=tcp://192.168.1.57;ist.recv_addr=192.168.1.57:6020;" # Slave thread to use wsrep_slave_threads= 8 wsrep_log_conflicts # This changes how InnoDB autoincrement locks are managed and is a requirement for Galera innodb_autoinc_lock_mode=2 # Node IP address wsrep_node_address=192.168.1.57 # Cluster name wsrep_cluster_name=pxc-cluster #If wsrep_node_name is not specified, then system hostname will be used wsrep_node_name=pxc-cluster-node-3 #pxc_strict_mode allowed values: DISABLED,PERMISSIVE,ENFORCING,MASTER pxc_strict_mode=ENFORCING # SST method wsrep_sst_method=xtrabackup-v2 #wsrep_sst_method=rsync #Authentication for SST method wsrep_sst_auth="sstuser:456789" # 修改自己的创建的账号、密码
4.6 初始化数据库
192.168.1.55 初始化数据 mysqld --initialize --user=mysql --datadir="/apps/data" 启动数据库 /etc/init.d/mysqld start --wsrep-cluster-address="gcomm://" 关闭数据库 MySQL5.7以后都要密码才能进去 /etc/init.d/mysqld stop 安全模式期待MySQL修改密码 mysqld_safe --wsrep-cluster-address=gcomm:// --user=mysql --skip-grant-tables --skip-networking & use mysql； update user set authentication_string=Password(‘123456‘) where user=‘root‘; flush privileges; shutdown exit 退出MySQL ps -ef | grep mysql 直到MySQL完全关闭 再次启动MySQL /etc/init.d/mysqld start --wsrep-cluster-address="gcomm://" 进入MySQL 创建同步账号及修改root密码 mysql -u root -p123456 创建MySQL同步账号及密码 GRANT ALL PRIVILEGES ON *.* TO sstuser@‘%‘ IDENTIFIED BY ‘456789‘; FLUSH PRIVILEGES; GRANT ALL PRIVILEGES ON *.* TO sstuser@‘localhost‘ IDENTIFIED BY ‘456789‘; FLUSH PRIVILEGES; 修改root 远程能够连接 GRANT ALL PRIVILEGES ON *.* TO root@‘%‘ IDENTIFIED BY ‘123456‘; FLUSH PRIVILEGES; 创建健康检查数据库账号密码 GRANT PROCESS ON *.* TO ‘clustercheckuser‘@‘localhost‘ IDENTIFIED BY ‘clustercheckpassword!‘; 如果使用自己账号密码请修改 vim /usr/sbin/clustercheck 对应的账号密码 192.168.1.56 192.168.1.57 其它节点直接启动 service mysqld start 重启第一个节点 192.168.1.55 service mysqld restart 出现错误 /etc/init.d/mysqld bootstrap-pxc 进行启动 启动完成登陆MySQL mysql -u root -p123456 查看MySQL 节点数 mysql> show global status like ‘wsrep_cluster_size‘; +--------------------+-------+ | Variable_name | Value | +--------------------+-------+ | wsrep_cluster_size | 3 | +--------------------+-------+ 1 row in set (0.00 sec) mysql> show global status like ‘wsrep_incoming_addresses‘; +--------------------------+-------------------------------------------------------+ | Variable_name | Value | +--------------------------+-------------------------------------------------------+ | wsrep_incoming_addresses | 192.168.1.57:3307,192.168.1.56:3307,192.168.1.55:3306 | +--------------------------+-------------------------------------------------------+ 1 row in set (0.00 sec) 创建测试数据看看是否同步 mysql> create database test; Query OK, 1 row affected (0.01 sec)
4.7 数据库健康检查启动
systemctl start xinetd.service 查看9200端口是否打开 netstat -anlp | grep 9200 tcp6 0 0 :::9200 :::* LISTEN 73323/xinetd 测试端口是否正常 telnet 192.168.1.55 9200 Escape character is ‘^]‘. HTTP/1.1 200 OK Content-Type: text/plain Connection: close Content-Length: 40 Percona XtraDB Cluster Node is synced. Connection closed by foreign host. 返回503 首先执行 /usr/sbin/clustercheck 是否返回200 如果不是检查链接数据库的账号密码 返回200正常 就请修改 vim /etc/xinetd.d/mysqlchk user root 重启systemctl restart xinetd.service 再次测试如果返回200正常就ok 还是报错就请查看系统日志修复
六、编译安装 haproxy (192.168.1.56,192.168.1.57)
安装 haproxy 日志记录支持
yum -y install rsyslog
解压 haproxy-1.7.0.tar.gz
tar -xvf /usr/local/src/haproxy-1.7.0.tar.gz -C /usr/local/src/
cd /usr/local/src/haproxy-1.7.0
make TARGET=linux31 PREFIX=/usr/local/haproxy
make install PREFIX=/usr/local/haproxy
创建文件夹haproxy
mkdir -pv /usr/local/haproxy/{conf,run,log}创建haproxy 启动脚本 vim /etc/init.d/haproxy
#! /bin/bash
# chkconfig: - 85 15
# description: haproxy is a World Wide Web server. It is used to serve
PROGDIR=/usr/local/haproxy
PROGNAME=haproxy
DAEMON=$PROGDIR/sbin/$PROGNAME
CONFIG=$PROGDIR/conf/$PROGNAME.conf
PIDFILE=$PROGDIR/run/$PROGNAME.pid
DESC="HAProxy daemon"
SCRIPTNAME=/usr/local/haproxy/init.d/$PROGNAME
# Gracefully exit if the package has been removed.
test -x $DAEMON || exit 0
start()
{
echo -n "Starting $DESC: $PROGNAME"
$DAEMON -f $CONFIG
echo "."
}
stop()
{ echo -n "Stopping $DESC: $PROGNAME"
cat $PIDFILE | xargs kill
echo "."
}
reload()
{ echo -n "reloading $DESC: $PROGNAME"
$DAEMON -f $CONFIG -p $PIDFILE -sf $(cat $PIDFILE)
}
case "$1" in
start)
start
;;
stop)
stop
;;
reload)
reload
;;
*)
echo "Usage: $SCRIPTNAME {start|stop|reload}" >&2
exit 1
;;
esac
exit 0chmod +x /etc/init.d/haproxy # 可执行权限
创建haproxy.conf
vim /usr/local/haproxy/conf/haproxy.conf
global log 127.0.0.1 local0 log 127.0.0.1 local1 notice #log loghost local0 info maxconn 50000 chroot /opt/haproxy uid 99 gid 99 daemon nbproc 2 pidfile /opt/haproxy/run/haproxy.pid #debug #quiet defaults log global mode tcp option tcplog option dontlognull option forwardfor option redispatch retries 3 timeout connect 3000 timeout client 50000 timeout server 50000 frontend admin_stat bind *:8888 mode http default_backend stats-back frontend pxc-front bind *:3306 mode tcp default_backend pxc-back frontend pxc-onenode-front bind *:3308 mode tcp default_backend pxc-onenode backend pxc-back mode tcp balance roundrobin option httpchk server node1 192.168.1.55:3306 check port 9200 inter 12000 rise 3 fall 3 server node2 192.168.1.56:3307 check port 9200 inter 12000 rise 3 fall 3 server node3 192.168.1.57:3307 check port 9200 inter 12000 rise 3 fall 3 backend pxc-onenode mode tcp balance roundrobin option httpchk server node1 192.168.1.55:3306 check port 9200 inter 12000 rise 3 fall 3 server node2 192.168.1.56:3307 check port 9200 inter 12000 rise 3 fall 3 backup server node3 192.168.1.57:3307 check port 9200 inter 12000 rise 3 fall 3 backup backend stats-back mode http balance roundrobin stats uri /admin?stats stats auth admin:admin stats realm Haproxy\ Statistics
Haproxy rsyslog 日志配置 vim /etc/rsyslog.conf #$ModLoad imudp 修改 $ModLoad imudp #$UDPServerRun 514 修改 $UDPServerRun 514 #添加 Haproxy 日志记录路径 local0.* /usr/local/haproxy/log/haproxy.log
启动Haproxy service haproxy start 加入开机启动 chkconfig haproxy on 查看haproxy 是否启动 ps -ef | grep haproxy haproxy 访问端口8888 账号密码 admin:admin http://192.168.1.56:8888/admin?stats http://192.168.1.57:8888/admin?stats
七、编译安装keepalived
安装automake-1.15 tar -xvf /usr/local/src/automake-1.15.tar.gz -C /usr/local/src cd /usr/local/src/automake-1.15 ./configure && make && make install
编译keepalived
tar -xvf /usr/local/src/keepalived-1.3.2.tar.gz -C /usr/local/src cd /usr/local/src/keepalived-1.3.2 ./configure --prefix=/usr/local/keepalived vmware 虚拟机安装 修改./lib/config.h HAVE_DECL_RTA_ENCAP 1 修改为HAVE_DECL_RTA_ENCAP 0 如果不修改编译会报错 make && make install
拷贝keepalived 可执行文件到/usr/sbin/ cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
创建keepalived 启动脚本
vim /etc/rc.d/init.d/keepalived
#!/bin/sh
#
# Startup script for the Keepalived daemon
#
# processname: keepalived
# pidfile: /var/run/keepalived.pid
# config: /etc/keepalived/keepalived.conf
# chkconfig: - 21 79
# description: Start and stop Keepalived
# Source function library
. /etc/rc.d/init.d/functions
# Source configuration file (we set KEEPALIVED_OPTIONS there)
. /etc/sysconfig/keepalived
RETVAL=0
prog="keepalived"
start() {
echo -n $"Starting $prog: "
daemon keepalived ${KEEPALIVED_OPTIONS}
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog
}
stop() {
echo -n $"Stopping $prog: "
killproc keepalived
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog
}
reload() {
echo -n $"Reloading $prog: "
killproc keepalived -1
RETVAL=$?
echo
}
# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
reload)
;;
restart)
stop
start
;;
condrestart)
if [ -f /var/lock/subsys/$prog ]; then
stop
start
fi
;;
status)
status keepalived
RETVAL=$?
;;
*)
echo "Usage: $0 {start|stop|reload|restart|condrestart|status}"
RETVAL=1
esac
exit $RETVALchmod +x /etc/rc.d/init.d/keepalived #keepalived 可执行
配置keepalived
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/ 创建/etc/keepalived 文件夹 mkdir -p /etc/keepalived
创建/etc/keepalived/keepalived.conf （192.168.1.56）
vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
admin@test.com #发生故障时，接受信息的email地址
}
notification_email_from admin@test.com
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
vrrp_script chk_haproxy { #自定义的监控脚本
script "/etc/keepalived/chk_haproxy.sh"
interval 2
weight 2
}
vrrp_instance VI_1 {
state BACKUP #让VIP不抢回
nopreempt
interface eth0 #监听接口
virtual_router_id 51
priority 100 #优先级，backup机器上的优先级要小与这个值
advert_int 1 #检查间隔
authentication {
auth_type PASS
auth_pass 1111
}
track_script { #自定义的监控脚本
chk_haproxy
}
virtual_ipaddress { #VIP地址，可以设多个
192.168.4.58/21
}
notify_backup "/etc/init.d/haproxy restart"
notify_fault "/etc/init.d/haproxy stop"
}创建/etc/keepalived/keepalived.conf （192.168.1.57）
! Configuration File for keepalived
global_defs {
notification_email {
admin@test.com #发生故障时，接受信息的email地址
}
notification_email_from admin@test.com
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
vrrp_script chk_haproxy { #自定义的监控脚本
script "/etc/keepalived/chk_haproxy.sh"
interval 2
weight 2
}
vrrp_instance VI_1 {
state BACKUP #让VIP不抢回
nopreempt
interface eth0 #监听接口
virtual_router_id 51
priority 99 #优先级，backup机器上的优先级要小与这个值
advert_int 1 #检查间隔
authentication {
auth_type PASS
auth_pass 1111
}
track_script { #自定义的监控脚本
chk_haproxy
}
virtual_ipaddress { #VIP地址，可以设多个
192.168.4.58/21
}
notify_backup "/etc/init.d/haproxy restart"
notify_fault "/etc/init.d/haproxy stop"
}创建/etc/keepalived/chk_haproxy.sh
vim /etc/keepalived/chk_haproxy.sh #!/bin/bash if [ $(ps -C haproxy --no-header | wc -l) -eq 0 ];then /etc/init.d/haproxy start fi sleep 2 if [ $(ps -C haproxy --no-header | wc -l) -eq 0 ]; then /etc/init.d/keepalived stop fi
chmod +x /etc/keepalived/chk_haproxy.sh #可执行权限
启动 keepalived
192.168.1.56 service keepalived start ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:1b:50:a3 brd ff:ff:ff:ff:ff:ff inet 192.168.1.56/21 brd 192.168.7.255 scope global dynamic eth0 valid_lft 44444sec preferred_lft 44444sec inet 192.168.4.58/21 scope global secondary eth0 valid_lft forever preferred_lft forever inet6 fe80::20c:29ff:fe1b:50a3/64 scope link valid_lft forever preferred_lft forever
192.168.1.57 service keepalived start 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:63:ae:85 brd ff:ff:ff:ff:ff:ff inet 192.168.1.57/21 brd 192.168.7.255 scope global dynamic eth0 valid_lft 58142sec preferred_lft 58142sec inet6 fe80::20c:29ff:fe63:ae85/64 scope link valid_lft forever preferred_lft forever
关闭 192.168.1.56 keepalived 进程
service keepalived stop [root@56~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:1b:50:a3 brd ff:ff:ff:ff:ff:ff inet 192.168.1.56/21 brd 192.168.7.255 scope global dynamic eth0 valid_lft 44258sec preferred_lft 44258sec inet6 fe80::20c:29ff:fe1b:50a3/64 scope link valid_lft forever preferred_lft forever
查看 192.168.1.57
[root@57~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:63:ae:85 brd ff:ff:ff:ff:ff:ff inet 192.168.1.57/21 brd 192.168.7.255 scope global dynamic eth0 valid_lft 57869sec preferred_lft 57869sec inet 192.168.4.58/21 scope global secondary eth0 valid_lft forever preferred_lft forever inet6 fe80::20c:29ff:fe63:ae85/64 scope link valid_lft forever preferred_lft forever
其它 keepalived 两个都配置为BACKUP 当第一个出现故障的时候恢复了不用抢占正在 提供服务的IP 服务不会闪断。 haproxy 配置双端口链接 3306 是同时负载3台服务器 3308 只是一台使用当第一台挂掉才会使用第二台。
本文出自 “成长记录” 博客，请务必保留此出处http://juestnow.blog.51cto.com/1515305/1886187
Percona-XtraDB-Cluster+haproxy+keepalived 编译安装
标签：percona-xtradb-cluster+haproxy+keepalived 编译安装
原文地址：http://juestnow.blog.51cto.com/1515305/1886187
