CentOS Linux解决 Device eth0 does not seem to be present

标签：rip   提示   eth0   ram   start   ini   mac   解决办法   ace   

通过OVF部署Linux主机后提示 ringing up interface eth0:  Device eth0 does not seem to be present,delaying initialization.

解决办法：

首先，打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：

# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

记录下，eth1网卡的mac地址00:0c:29:50:bd:17

接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0

# vi /etc/sysconfig/network-scripts/ifcfg-eth0

将 DEVICE="eth0"  改成  DEVICE="eth1"  ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址  HWADDR="00:0c:29:50:bd:17"

最后，重启网络

# service network restart
或者

# /etc/init.d/network restart

正常了

如果觉得显示eth1 觉得别扭，先删除上面一行然后 修改eht1 为eth0

来自： http://www.linuxidc.com/Linux/2012-12/76248.htm

CentOS Linux解决 Device eth0 does not seem to be present

标签：rip   提示   eth0   ram   start   ini   mac   解决办法   ace   

原文地址：http://www.cnblogs.com/sunpear/p/6289067.html