python自动获取cisco配置信息

标签：python   network   

from netmiko import ConnectHandler
from datetime import datetime
JTN_CORE={"device_type":"cisco_ios","ip":"172.16.5.254","username":"test","password":"#"} 
JTS_CORE={"device_type":"cisco_ios","ip":"172.16.4.254","username":"test","password":""} 
start_time=datetime.now()
time=str(start_time)
all_devices=[JTN_CORE,JTS_CORE]
all_devices_filename=["JTN_CORE"+time,"JTS_CORE"+time,]
i=0
for a_device in all_devices:
net_connect=ConnectHandler(**a_device)
showrun=str(net_connect.send_command("show run"))
file=all_devices_filename[i]
i=i+1
f=open(file,‘w‘) 
f.write(showrun)
f.close
end_time=datetime.now()
total_time=end_time-start_time
print total_time

本文出自 “7698164” 博客，请务必保留此出处http://7708164.blog.51cto.com/7698164/1903580

python自动获取cisco配置信息

标签：python   network   

原文地址：http://7708164.blog.51cto.com/7698164/1903580