标签：style blog http color os io for 数据
# ip netns add blue
# ip netns list
blue
先创建veth
# ip link add veth0 type veth peer name veth1
在当前namespace可以看到veth0和veth1
# ip link list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:b2:cf:72 brd ff:ff:ff:ff:ff:ff
3: veth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether ae:0d:00:e1:11:38 brd ff:ff:ff:ff:ff:ff
4: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 42:e7:50:d4:bb:c5 brd ff:ff:ff:ff:ff:ff
将veth1加到namespace “blue”
# ip link set veth1 netns blue
此时，当前namepapce只能看到veth0。
通过如下命令可以查看blue namespace的网口
# ip netns exec blue ip link list
通过ip netns exec可以配置namespace的网口
# ip netns exec blue ifconfig veth1 172.17.42.2/16 up
通过bridge来实现。参见veth pair一节。
主要参考
[0]Introducing Linux Network Namespaces
veth pair是用于不同network namespace间进行通信的方式，veth pair将一个network namespace数据发往另一个network namespace的veth。如下：
# add the namespaces
ip netns add ns1
ip netns add ns2
# create the veth pair
ip link add tap1 type veth peer name tap2
# move the interfaces to the namespaces
ip link set tap1 netns ns1
ip link set tap2 netns ns2
# bring up the links
ip netns exec ns1 ip link set dev tap1 up
ip netns exec ns2 ip link set dev tap2 up
如果多个network namespace需要进行通信，则需要借助bridge：
# add the namespaces
ip netns add ns1
ip netns add ns2
# create the switch
BRIDGE=br-test
brctl addbr $BRIDGE
brctl stp $BRIDGE off
ip link set dev $BRIDGE up
#
#### PORT 1
# create a port pair
ip link add tap1 type veth peer name br-tap1
# attach one side to linuxbridge
brctl addif br-test br-tap1
# attach the other side to namespace
ip link set tap1 netns ns1
# set the ports to up
ip netns exec ns1 ip link set dev tap1 up
ip link set dev br-tap1 up
#
#### PORT 2
# create a port pair
ip link add tap2 type veth peer name br-tap2
# attach one side to linuxbridge
brctl addif br-test br-tap2
# attach the other side to namespace
ip link set tap2 netns ns2
# set the ports to up
ip netns exec ns2 ip link set dev tap2 up
ip link set dev br-tap2 up
#
内核实现
veth的实现与loopback interface类似，比较简单：
//drivers/net/veth.c static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev) { struct net_device *rcv = NULL; struct veth_priv *priv, *rcv_priv; priv = netdev_priv(dev); rcv = priv->peer; rcv_priv = netdev_priv(rcv); stats = this_cpu_ptr(priv->stats); length = skb->len; //转发给peer if (dev_forward_skb(rcv, skb) != NET_RX_SUCCESS) goto rx_drop;
主要参考
[0]Linux Switching – Interconnecting Namespaces
作者：YY哥
出处：http://www.cnblogs.com/hustcat/
本文版权归作者和博客园共有，欢迎转载，但未经作者同意必须保留此段声明，且在文章页面明显位置给出原文连接，否则保留追究法律责任的权利。
Docker实践(4)—network namespace与veth pair,布布扣,bubuko.com
Docker实践(4)—network namespace与veth pair
标签：style blog http color os io for 数据
原文地址：http://www.cnblogs.com/hustcat/p/3928261.html
