Definitions
A trace file is a file that contains diagnostic data used to investigate problems. Also, trace files can provide guidance for tuning applications or an instance.
Types of Trace Files
Each server and background process can periodically write to an associated trace file. The files contain information on the process environment, status, activities, and errors.
The SQL trace facility also creates trace files, which provide performance information on individual SQL statements. You can enable tracing for a client identifier, service, module, action, session, instance, or database in various ways.
Extended Tracing and Multitenancy
In a multitenant environment, running the
ALTER SESSION SET EVENTS
SQL statement from either the root or a pluggable database (PDB) enables tracing for the current user session. If you switch from one PDB to another PDB (by using the ALTER SESSION SET CONTAINER
statement), then tracing is still enabled for the new PDB. You cannot enable tracing for a single PDB in a multitenant container database (CDB); it applies to all PDBs and the root. Setting Trace Events
Extended SQL trace, namely the 10046 event can be started in multiple ways and using multiples methods. Here is a list of SQL commands and PL/SQL API‘s that can be used to activate the 10046 trace. Depending on what you need, you may want to use one or another.
- alter session set events ‘10046 trace name context forever level 8‘;
- DBMS_MONITOR: It is specially useful for tracing remote sessions and to enable what Oracle calls end-to-end tracing.
- DBMS_SYSTEM
The last two are specially good if you want to trace a different sessions. However, if you want more granularity when tracing a specific session, one can make use of the new alter session set events syntax as follows:
To enable SQL tracing (10046) for a specific sql_id:
alter session set events ‘sql_trace [sql:jfkgokfh2v9s1]’;
alter session set events ‘sql_trace [sql:jfkgokfh2v9s1] off’;
To enable Optimizer tracing (10053) for a specific sql_id:
alter session set events ‘trace[rdbms.SQL_Optimizer.*[sql:jfkgokfh2v9s1]‘;
alter session set events ‘trace[rdbms.SQL_Optimizer.*[sql:jfkgokfh2v9s1] off‘;
According to Maria Colgan, Oracle Database 11g has introduced a new diagnostic events infrastructure. This simplifies the tracing exercise allowing you to trace a specific SQL statement instead of enabling the trace for the entire session just to work on a single one.
As you can see from the above examples, there are more trace event codes than just the SQL trace event. Many other events can be used to expose timings and flows regarding Oracle internal workings.
I will be listing below, some trace event codes that I am familiar with and will update it with further ones as I
Trace Events
Find below, a list of trace event codes that I have extracted from the message file that is shipped with any Oracle Database Home. The text message file I am referring to is the following one:
$ORACLE_HOME/rdbms/mesg/oraus.msg
10005, 00000, "trace latch operations for debugging"
// level 1 - trace latch gets and frees
// level 4 - trace multiple posts by processes when latch is freed
10021, 00000, "KST event to trace control file header writes and reads"
10022, 00000, "trace ktsgsp"
10027, 00000, "Specify Deadlock Trace Information to be Dumped"
10028, 00000, "Dump trace information during lock / resource latch cleanup"
// Trace level is a bitfield.
// 0x0001 Trace sort auto memory management requirements
// 0x0004 Trace use of new vs old sort
// 0x0020 trace and debug sort spill statistics
// 0x0080 Trace cluster-by-rowid (CBRID) sort
// Trace level is a bitfield.
// 0x01 Output sort statistics in the trace file at the end of sort.
10047, 00000, "trace switching of sessions"
10050, 00000, "sniper trace"
10051, 00000, "trace OPI calls"
10053, 00000, "CBO Enable optimizer trace"
10054, 00000, "CBO Enable optimizer trace for recursive statement (RPI)"
10074, 00000, "default trace function mask for kst"
10079, 00000, "trace data sent/received via SQL*Net"
// *Action: level 1 - trace network ops to/from client
// level 4 - trace network ops to/from dblink
10104, 00000, "dump hash join statistics to trace file"
// Trace level is a bit field.
// This event can be turned on globally by seting trace name sqlmem_tracing
10146, 00000, "enable Oracle TRACE collection"
// Oracle Trace may still have it enabled by mistake
10166, 00000, "trace long operation statistics updates"
/ At level 1, KQR will dump out latch clean-up debugging traces.
/ At level 2, KQR will dump out bootstrap debugging traces.
10224, 00000, "index block split/delete trace"
10226, 00000, "trace CR applications of undo for data operations"
10228, 00000, "trace application of redo by kcocbk"
// *Action: such blocks are skipped in table scans, and listed in trace files
// *Action: puts corrupted block in trace file
// information is logged to a trace file.
10246, 00000, "print trace of PMON actions to trace file"
10250, 00000, "Trace all allocate and free calls to the topmost SGA heap"
10254, 00000, "trace cross-instance calls"
10257, 00000, "trace shared server load balancing"
10266, 00000, "Trace OSD stack usage"
/ This event can limit the size of tracefile produced for such
10289, 00000, "Do block dumps to trace file in hex rather than fromatted"
10292, 00000, "hang analysis trace event"
// 0x1 - dump errors to trace file through ksdwrf
// 0x2 - dump errors to trace file as ORA-600 + 0x1
10293, 0000, "trace log switch media recovery checkpoints"
10299, 00000, "Trace prefetch tracking decisions made by CKPT"
// *Comment: This event will trace the history of KTD actions
// made by the CKPT process are traced. The trace output is
// written to that process‘ trace file.
10302, 00000, "trace create or drop internal trigger"
10303, 00000, "trace loading of library cache for internal triggers"
10304, 00000, "trace replication trigger"
10305, 00000, "trace updatable materialized view trigger"
10306, 00000, "trace materialized view log trigger"
10307, 00000, "trace RepCat execution"
10310, 00000, "trace synchronous change table trigger"
10318, 00000, "Trace extensible txn header movements"
10319, 00000, "Trace PGA statistics maintenance"
// 0x0001 dump message in trace file when PGA stats are diverging
// 0x0002 trace top-level PGA allocation and deallocation
10325, 0000, "Trace control file record section expand and shrink operations"
// *Action: trace control file record section expand and shrink operations to
10335, 00000, "trace database open status"
// *Action: should cause process to dump trace file and die
// *Action: Prints the checkpoint queue and buffers to the trace file
// *Comment: For testing only. Trace level bits can be used in combination:
// *Comment: trace level is a bitfield (see kkrp.h)
10390, 00000, "Trace parallel query slave execution"
// trace level is a bitfield
// 0x0800 Trace CRI random sampling
// 0x1000 Trace signals
// 0x2000 Trace PX granule operations
10391, 00000, "trace PX granule allocation/assignment"
// 0x0400 trace affinity module
// 0x0800 trace granule allocation during query execution
// 0x1000 trace object flush
10399, 00000, "trace buffer allocation"
// Level2: trace buffer init, chunk alloc, free and recovery
// Level3: trace buffer alloc & free
10420, 00000, "trace KSO OS-process operations"
// *Action: Trace KSO operations.
// trace file. This only works for non-OS Oracle errors.
// Usage: event="10423 trace name context forever, level <your-err>"
// event="10423 trace name context forever, level 28"
10425, 00000, "enable global enqueue operations event trace"
// *Action: Dump trace for global enqueue operations.
10426, 00000, "enable ges/gcs reconfiguration event trace"
// *Action: Dump trace for ges/gcs reconfiguration.
10427, 00000, "enable global enqueue service traffic controller event trace"
// *Action: Dump trace for global enqueue service traffic controller.
// *Action: Dump trace for global enqueue service cached resource activities.
// *Action: Dump trace for global enqueue service IPC calls.
10430, 00000, "enable ges/gcs dynamic remastering event trace"
// *Action: Dump trace for ges/gcs dynamic remastering.
// *Action: Dump trace for global cache service fusion calls.
// *Action: Dump trace for global enqueue service muliple LMS.
// *Action: Dump trace for global enqueue service deadlock detetction.
10437, 00000, "enable trace of global enqueue service S optimized resources"
10440, 00000, "enable global enqueue service inquire resource modes trace"
// *Action: Dump trace for global enqueue service resource inquiry messages.
10441, 00000, "enable diagnosibility daemon (DIAG) trace"
// *Action: Dump traces for DIAG.
10442, 00000, "enable trace of kst for ORA-01555 diagnostics"
// *Action: Dump trace for ORA-01555 diagnostics
// *Action: Dump trace for LMS priority management
10449, 00000, "enable trace of kst for undo manageability features diagnostics"
// *Action: Dump trace for undo manageability features diagnostics
10453, 00000, "Dump compression statistics to trace file"
// generation and dumps interesting information to trace
10472, 00000, "dump reading log buffer hit ratio histogram to lgwr trace file"
// to lgwr trace file.
10478, 00000, "DBW0 file identification trace event"
10490, 00000, "Trace OSM misc. events"
10491, 00000, "Trace OSM messaging (KFN) events"
10492, 00000, "Trace OSM metadata events"
10494, 00000, "Trace OSM metadata events"
10495, 00000, "Trace OSM metadata events"
10497, 00000, "Trace OSM metadata events"
10499, 00000, "Trace OSM metadata events"
10500, 00000, "turn on traces for SMON"
// Level: <=5 trace instance recovery
// > 5 trace posting of SMON
10507, 00000, "Trace bind equivalence logic"
10524, 00000, "CMON connection pool trace event"
// *Comment: enables trace messages from the lightweight thread module.
// *Comment: enables trace messages from defer SGA allocation
// *Cause: Check alert/trace files for more information
// *Cause: Check alert/trace files for more information
// level: 0x02 Print trace information of assigning CVs to undo tbs slave to trace file.
10569, 00000, "Trace datafile header writes"
10604, 00000, "trace parallel create index"
10606, 00000, "trace parallel create index"
10607, 00000, "trace index rowid partition scan"
// and puts more trace on errors in range scans
10608, 00000, "trace create bitmap index"
10609, 00000, "trace for array index insertion"
10610, 00000, "trace create index pseudo optimizer"
10622, 00000, "test or trace online index build or rebuild"
// during alter session set events immediate trace name treedump
10649, 00000, "Turn off/trace lob index freelist coalesce"
// *Cause: Will turn off or trace lob index freelist coalescing
// *Action: INternal system parameter (_ksi_trace) can be used in addition
// _ksi_trace = RTXA
10708, 00000, "print out trace information from the RAC buffer cache"
10710, 00000, "trace bitmap index access"
10711, 00000, "trace bitmap index merge"
10712, 00000, "trace bitmap index or"
10713, 00000, "trace bitmap index and"
10714, 00000, "trace bitmap index minus"
10715, 00000, "trace bitmap index conversion to rowids"
10716, 00000, "trace bitmap index compress/decompress"
10717, 00000, "trace bitmap index compaction trace for index creation"
10719, 00000, "trace bitmap index dml"
10720, 00000, "trace db scheduling"
// *Comment: traces db scheduling
10722, 00000, "trace server level database scheduling"
10724, 00000, "trace cross-instance broadcast"
// The trace level is a bitfield, so use it as you would a flag.
10730, 00000, "trace row level security policy predicates"
// *Comment: traces SQL statements generated to execute CURSOR expressions
// *Comment: Causes debug trace to be dumped for ksws routines
// Trace level is a bitfield.
// *Comment: Causes debug trace to be dumped for kywm routines
10741, 00000, "trace missing BRR generation"
// Trace level is a bit field.
// 0x0002 Trace missing BRR due to Oracle RAC pings
// trace missing BRR due to Oracle RAC pings
// Trace level is a bitfield.
// use level 5 to trace enabling and level 6 to trace disabling.
10780, 00000, "LogMiner API trace event"
10781, 00000, "LogMiner reader trace event"
10782, 00000, "LogMiner preparer trace event"
10783, 00000, "LogMiner builder trace event"
10784, 00000, "LogMiner dictionary trace event"
10785, 00000, "LogMiner trace event"
10787, 00000, "trace intra-instance broadcast"
10788, 00000, "trace call stacks"
10790, 00000, "LogMiner trace event"
10791, 00000, "Logical Standby swithover/failover trace event"
10792, 00000, "Logical Standby XDAT trace event"
10793, 00000, "Logical Standby trace event"
10794, 00000, "Logical Standby trace event"
10795, 00000, "VKTM Process trace event"
10796, 00000, "Elevate Scheduler Priority trace event"
// *Comment: Causes debug trace to be dumped for gsm routines
10809, 00000, "Trace state object allocate / free history"
// *Comment: This event will trace the history of KSS allocations / deletions.
10810, 00000, "Trace snapshot too old"
10811, 00000, "Trace block cleanouts"
10812, 00000, "Trace Consistent Reads"
10826, 00000, "enable upgrade/downgrade error message trace"
// *Action: Check the trace files and other relevant output
10830, 00000, "Trace group by sort row source"
// trace level is a bitfield
// 0x0001 trace adaptive fetch usage
// 0x0002 trace exceptions during aggregation
// 0x0004 trace use of one comparison for all key columns
10831, 00000, "Trace group by rollup row source"
// trace level is a bitfield
// 0x0001 trace use of one comparison for all key columns
10832, 00000, "Trace approximate NDV row source"
// trace level is a bitfield
// 0x0001 trace
// rollup pushdown is enabled. Trace level indicates the number of
// 0x0001 trace adaptive mode for partial rollup pushdown
10839, 00000, "trace / debug caching module (qesca.c)"
// 0x0001 trace / debug caching
10840, 00000, "trace / debug pl/sql caching module (kkxmInitCache)"
// 0x0001 trace / debug pl/sql caching
// state and the stack trace.
// See trace file for more details.
10880, 00000, "trace Java VM execution"
// related messages to trace files. This includes event
10907, 00000, "Trace extent management events"
10908, 00000, "Trace temp tablespace events"
10975, 00000, "trace execution of parallel propagation"
// > 0 trace the execution of sync procedural replication,
// > 1 trace the loading of meta-data into library cache for ip
10977, 00000, "trace event for RepAPI"
10979, 00000, "trace flags for join index implementation"
// > 1 Dump refresh expressions (SQL) to trace file.
// > 0 Echo input parameter values to the trace log.
// > 1 Display trigger debug info to the trace log also.
// trace file.
22700, 00000, "object access trace event number"
// *Action: If the trace event number is set to a level greater than 0 then
// *Action: Look for information in the session trace file and contact
// *Action: Look for information in the session trace file and contact
// *Action: Event used to trace operation of AQ.
// *Action: Set this event in your environment to obtain trace information
// *Action: Event to trace KOH memory events
// bit 0x1: KOH_TRACE_LEVEL_MEM: trace memory alloc and free
// bit 0x2: KOH_TRACE_LEVEL_DUR: trace duration start & end
// bit 0x4: KOH_TRACE_LEVEL_ZEROCACHE: cache max & opt size = 0
// bit 0x8: KOH_TRACE_LEVEL_KOHIH: trace duration list mgmt
// bit 0x10: KOH_TRACE_LEVEL_INS: dump memory or instance
// *Action: Event to trace KOC cache events
// bit 0x1: KOC_TRACE_EVENT_PIN: trace pin operations
// bit 0x2: KOC_TRACE_EVENT_DUR: trace duration operations
// bit 0x4: KOC_TRACE_EVENT_TXN: trace transaction operations
// *Action: Event to trace KOD data events
// bit 0x1: KOD_TRACE_EVENT_PIC: trace pickle operations
// bit 0x2: KOD_TRACE_EVENT_UPIC: trace unpickle operations
// bit 0x4: KOD_TRACE_EVENT_TYPE: trace pickle/unpickle a type
// bit 0x00004000: KOD_TRACE_LEVEL_MEDIUM: generate medium amount of tracing
// bit 0x00008000: KOD_TRACE_LEVEL_HIGH: generate high amount of tracing
// *Action: Event to trace KOL collection events
// bit 0x1: KOL_TRACE_EVENT_PIC: trace pickle operations
// bit 0x2: KOL_TRACE_EVENT_UPIC: trace unpickle operations
// bit 0x40: KOL_TRACE_LEVEL_MEDIUM: generate medium amount of tracing
// bit 0x80: KOL_TRACE_LEVEL_HIGH: generate high amount of tracing
// *Action: Event to trace KOKC events
// bit 0x1: KOkc_TRACE_LEVEL_BASIC: basic dumps
// bit 0x2: KOKC_TRACE_LEVEL_TIME: dump time
// bit 0x4: KOKC_TRACE_LEVEL_KOKCD: dump kokcd structure
// bit 0x8: KOKC_TRACE_LEVEL_ASSERT: enforce asserts
// bit 0x1000: KOKC_TRACE_LEVEL_STACK: dump short stack
// bit 0x2000: KOKC_TRACE_LEVEL_LSTACK: dump full stack
// *Action: Event to trace KOPF operations (FDO)
// bit 0x1: KOPF_TRACE_EVENT_FDO: dump FDO‘s in kopfupdate()
// *Cause: Number of parameters specified in OCI trace event have exceeded
24917, 00000, "OCI notification client trace event"
// *Action: Look at the client trace files for additional information.
// *Action: Event used to trace EMON.
// to provide the trace file and information about reproducing the
// the status of these processes. Also check the trace file for more
// process. Also check the trace files for more information.
// process. Also check the trace files for more information.
// process. Also check the trace files for more information.
// process. Also check the trace files for more information.
// and check the trace file for information about the object.
// *Action: Refer to trace file for more details.
// *Action: Check the error stack and trace file for error details.
// See trace file for more details.
// See trace file for more details.
// *Action: Check trace to see how the jobs were submitted and drop them.
// *Action: Check trace to see how the rows were inserted and call
// *Action: Check trace to see how the jobs were submitted and drop them.
// *Action: Check trace to see how the invalid GoldenGate, XStream or Streams type was created and
// *Action: Check trace to identify the problem and call
// *Action: Check trace for more detail.
// *Action: Check the corresponding split/merge row in DBA_STREAMS_SPLIT_MERGE view, alert log and trace file for details.
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check Oracle trace file, OS message files and
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: check for trace file and contact Oracle Support
// *Action: Check for trace file and contact Oracle Support.
// *Action: Check the Oracle trace file for additional information on file name
// *Action: Consult the trace file for details
// *Action: Check additional error messages in the process trace file and
// trace file.
// If there is a trace file, report the errors in it to Oracle
// is a trace file, report the errors in it to Oracle Support
// the process trace file and alert log.
// the process trace file and alert log.
// the process trace file and alert log.
// the process trace file and alert log.
// the process trace file and alert log.
// Check the additional diagnostic information in the trace file and
// *Action: Check the alert log and process trace file for additional
// specified in the trace file cannot be corrected.
// Support Services along with alert log and trace files. If the cellsrv
// *Action: Check the additional diagnostic information in the trace file and
// Check the trace file for the name of the affected policy and
// *Action: Check the trace file and correct the errors.
// *Action: Review the trace file for detailed error information.
// *Action: Refer to the trace file for details.
// *Action: Set this event in your environment to obtain trace information
// *Action: Check the error. For more information on the error, check the trace
// to a trace (*.TRC) file for the ORACLE instance and to
// version incompatibility is logged in trace (*.TRC) files,
// trace file.
// Also check for additional information in log and trace
29712, 00000, "enable global enqueue service cancel event trace"
// *Action: Dump trace for global enqueue service cancel.
29713, 00000, "enable global enqueue service close event trace"
// *Action: Dump trace for global enqueue service close.
29714, 00000, "enable global enqueue service state object event trace"
// *Action: Dump trace for global enqueue service state object.
29717, 00000, "enable global resource directory freeze/unfreeze event trace"
// *Action: Dump trace for global resource directory freeze/unfreeze.
29718, 00000, "enable global enqueue service CGS interface event trace"
// *Action: Dump trace for global enqueue service CGS interface.
29720, 00000, "enable global enqueue service SCN service event trace"
// *Action: Dump trace for global enqueue service SCN service.
29722, 00000, "enable global enqueue service process death event trace"
// *Action: Dump trace for global enqueue service process death.
29724, 00000, "enable global enqueue heartbeat and CSS/GIPC event trace"
// *Action: Dump trace for global enqueue heartbeat operations and CSS/GIPC
// *Action: Enable trace and field levels for KA diagnostics
29733, 00000, "enable multiple recovery domains event trace"
// *Action: Dump trace for ges/gcs multiple recovery domains
// *Action: Check the trace files of other active instances in the cluster
// *Action: Check the alert log, LMON and LMHB trace files for any errors and
29750, 00000, "enable CGS name service event trace"
// *Action: Check the alert file and relevent trace files and
// *Action: Check the alert file and relevent trace files and contact
// *Action: Enable trace and field levels for GCR diagnostics.
// *Action: Follow up with the Oracle Support Services using the traces
// *Action: Increase shared_pool_size in Init.ora. Check relevant trace files to get more information about the current number of CQN registrations that caused this error message.
// 0x01 - trace loading of TT
// 0x02 - trace SQL statement generation
// 0x04 - trace RAC execution
// 0x08 - trace DBMS_DST procedures
30402, 00000, "access advisor debug/testing trace"
// occurred. The trace logs for each refresh operation describe the
// *Action: Check the trace logs for more information. Ensure that the
// the trace log for the failed process to see if there is any
// the trace log for the failed process to see if there is any
// the trace log for the failed process to see if there is any
// the trace log for the failed process to see if there is any
// the trace log for the failed process to see if there is any
// the trace log for the failed process to see if there is any
// the trace log for the failed process to see if there is any
// *Action: Check your system for problems. Check the trace file for the
// trace file for the master process for any additional information.
// unexpectedly. Check the log file for the operaton and the trace
// the trace log for the failed process to see if there is any
// the trace log for the failed process to see if there is any
31902, 00000, "access advisor debug/testing trace"
31904, 00000, "Synchronous refresh debug or testing trace"
31929, 00000, "Synchronous refresh debug or testing trace"
// *Action: Check FMON trace files for errors.
// check FMON trace files for an ORA-32052 error.
// *Action: Check FMON trace files for errors.
// *Action: Check FMON and FMPUTL trace files for errors.
// *Action: Check foreground trace files for errors.
// Oracle DIAG trace files for errors.
// *Action: Check alert log and DIAG trace file for error detail
// *Action: Check error in DIAG trace file and issue the command again
// *Action: Check DIAG trace files for errors.
// *Action: Check DIAG trace files for errors.
// *Action: Check DIAG trace files for errors.
// *Action: Check DIAG trace files for errors.
// *Action: Check the trace files.
// *Action: Check Trace file for debug info
32781, 00000, "Trace event for window functions"
// Trace level is a bitfield.
// 0x0001 trace window functions after ordering semantics rewrite
// 0x0002 trace statistics collected for window functions
// 0x0004 trace ordering groups generated for window functions
// 0x0008 trace dynamic sampling statistics expressions
// 0x0010 trace messages for slave-2-QC communication
// 0x0020 trace window consolidation rows
38344, 00000, "bulk load compression trace event"
// *Comment: Turn on/off various bulk load compression trace features.
// More information was dumped to the trace file.
// More information was dumped to the trace file.
// *Action: See trace files for details of the problem.
// *Action: Check the FLASHBACK DATABASE command trace file for a
// *Action: Check the trace log for the offline range of the data file.
// *Action: See trace files for details of the problem.
// the trace log for the failed process to see if there is any
39089, 00000, "ku trace event"
// *Comment: Turn on/off various ku trace and debug features (documentation
// check the trace log for the failed process, if one was created,
// check the trace log for the failed process, if one was created,
// check the trace log for the failed process, if one was created,
// check the trace log for the failed process, if one was created,
// check the trace log for the failed process, if one was created,
// check the trace log for the failed process, if one was created,
40288, 00000, "event to debug and trace mining model load"
// Level 2 - trace model load info
// *Action: Turn on related trace for details and report it as a bug.
// package, see kpbf.c for trace levels.
// *Action: Check trace message.
// wallet is on the token. Check trace message
// *Action: Check trace message
43822, 0000, "enable/disable/trace rejection heuristic"
// *Action : Causes kkdcCheckAcrMap to write debug information to the trace
45490, 00000, "rolling upgrade trace event"
// *Action : Check the database server traces and contact Oracle Support
// *Action: Check the trace files for the names of the invalid objects found
// *Action: Check the trace files for details regarding which sensitive
// *Action: Check the trace files for more details.
// *Action: Check the trace file for a list of sensitive columns that were
// the error stack or alert log or trace file that indicate
// *Action: Check the trace file for detailed error information.
// *Action: Check the trace files to identify the source of the error in the
// *Action: Check the PL/SQL error stack and trace files for a possible error.
// *Action: Check the trace files for the PDB information where the operation
// *Action: Check the trace file for more information.
// *Action: Check the trace file for more information and try again.
// exists and the operation is failing, check the trace file and
// *Action: Check the trace file for more information, create permissions on
// *Action: Check the trace file for more information, specify the correct
// *Action: Check the trace file for more information, specify the correct
// *Action: Check trace files for more information. Delete the target keystore
// *Action: Check trace files for more information. Delete the target keystore
// *Action: Check trace files for more information. If the target keystore is
// *Action: Check the contents of the trace file to identify the faulty master
// *Action: Check the trace file for errors and retry the command.
// *Action: Check the contents of the trace file for errors and retry the
// *Action: Check the contents of the trace file for errors and retry the
// *Action: Check the contents of the trace file for more information on the
// *Action: Check the trace files for errors. Create the keys in PDBs where
// *Action: Check the trace files for errors. REKEY the keys in PDBs where
// *Action: Check the contents of the trace file for more information on the
// *Action: Check the trace files for errors. Activate the keys in PDBs where
// *Action: Check the trace files for errors. REKEY the PDBs where the master
// *Action: Check the trace file for more information and retry the operation.
// If there is no trace information and trying the operation again
// *Action: Check the trace file for more information and retry the operation.
// If there is no trace information and trying the operation again
// sgaetjen 12/30/05 - add trace event
/ husun 10/02/07 - add backup control file to trace message
/ hayu 09/21/06 - add message for trace merging
/ bdagevil 06/11/06 - error for parsing UTS Trace event
/ bdagevil 06/11/06 - error for parsing UTS Trace event
// *Action: Examine the thread trace file for more information.
54674, 0000, "Event to dump the R-tree node cache contents to trace file"
// *Action: Dump the R-tree node cache contents to trace file. Set this event
54675, 0000, "Event to enable diagnostic and informational messages to trace file"
// *Action: Enable or disable diagnostic and informational messages to trace
// *Action: Check the stack trace for additional information.
// *Action: Check the error message and the stack trace.
55500, 0000, "Event to be used for different trace levels"
55516, 0000, "Event to dump the LCR‘s seen by flashback transaction backout to trace file"
// Level 1 > Enable general temp undo debug traces
// Level 1 > Enable general parallel transaction debug traces
55570, 0000, "transaction layer debug trace event"
55703, 00000, "Trace min-act to MMON trace file"
// *Action: Dumps min-act-scn tracing to MMON trace file.
55901, 0000, "Secure file log Trace event"
// Check the trace files on remote instances for the underlying
// *Action: Review trace files for errors.
56801, 00000, "ksz trace event"
// *Comment: Turn on/off various ksz trace and debug features (documentation
// *Action: Check alert or trace file for error(s).
// *Action: Check alert or trace file for error(s).
// *Action: Check alert or trace file for error(s).
// *Action: Check alert or trace file for error(s) or complete upgrading of
// *Action: Check alert or trace files for error(s).
// *Action: Check alert or trace files for error(s).
// Additional information in the trace file provides details
// *Action: Check additional information in the trace file.
// error. See alert or trace files in all instances for further
// *Action: None. This error is for understanding the trace file of XMLIndex rewrite.
// *Cause: There was no subprogram, error, or backtrace at the specified stack
// or backtrace