标签：turn too 加密 执行 else rem handler highlight ddd
WebSocket协议是基于TCP的一种新的协议。WebSocket最初在HTML5规范中被引用为TCP连接，作为基于TCP的套接字API的占位符。它实现了浏览器与服务器全双工(full-duplex)通信。其本质是保持TCP连接，在浏览器和服务端通过Socket进行通信。
本文将使用Python编写Socket服务端，一步一步分析请求过程！！！
- 服务端（socket服务端）
1. 服务端开启socket，监听IP和端口
3. 允许连接
* 5. 服务端接收到特殊值【加密sha1,特殊值,migic string="258EAFA5-E914-47DA-95CA-C5AB0DC85B11"】
* 6. 加密后的值发送给客户端
- 客户端（浏览器）
2. 客户端发起连接请求（IP和端口）
* 4. 客户端生成一个xxx，【加密sha1,特殊值,migic string="258EAFA5-E914-47DA-95CA-C5AB0DC85B11"】,向服务端发送一段特殊值
* 7. 客户端接收到加密的值
import socket sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) sock.bind((‘127.0.0.1‘, 8002)) sock.listen(5) # 等待用户连接 conn, address = sock.accept() ... ... ...
启动Socket服务器后，等待用户【连接】，然后进行收发数据。
<script type="text/javascript">
var socket = new WebSocket("ws://127.0.0.1:8002/xxoo");
...
</script>
当客户端向服务端发送连接请求时，不仅连接还会发送【握手】信息，并等待服务端响应，至此连接才创建成功！
import socket sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) sock.bind((‘127.0.0.1‘, 8002)) sock.listen(5) # 获取客户端socket对象 conn, address = sock.accept() # 获取客户端的【握手】信息 data = conn.recv(1024) ... ... ... conn.send(‘响应【握手】信息‘)
请求和响应的【握手】信息需要遵循规则：
注：magic string为：258EAFA5-E914-47DA-95CA-C5AB0DC85B11
请求【握手】信息为：
GET /chatsocket HTTP/1.1 Host: 127.0.0.1:8002 Connection: Upgrade Pragma: no-cache Cache-Control: no-cache Upgrade: websocket Origin: http://localhost:63342 Sec-WebSocket-Version: 13 Sec-WebSocket-Key: mnwFxiOlctXFN/DeMt1Amg== Sec-WebSocket-Extensions: permessage-deflate; client_max_window_bits ... ...
提取Sec-WebSocket-Key值并加密：
import socket
import base64
import hashlib
def get_headers(data):
"""
将请求头格式化成字典
:param data:
:return:
"""
header_dict = {}
data = str(data, encoding=‘utf-8‘)
for i in data.split(‘\r\n‘):
print(i)
header, body = data.split(‘\r\n\r\n‘, 1)
header_list = header.split(‘\r\n‘)
for i in range(0, len(header_list)):
if i == 0:
if len(header_list[i].split(‘ ‘)) == 3:
header_dict[‘method‘], header_dict[‘url‘], header_dict[‘protocol‘] = header_list[i].split(‘ ‘)
else:
k, v = header_list[i].split(‘:‘, 1)
header_dict[k] = v.strip()
return header_dict
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
sock.bind((‘127.0.0.1‘, 8002))
sock.listen(5)
conn, address = sock.accept()
data = conn.recv(1024)
headers = get_headers(data) # 提取请求头信息
# 对请求头中的sec-websocket-key进行加密
response_tpl = "HTTP/1.1 101 Switching Protocols\r\n" "Upgrade:websocket\r\n" "Connection: Upgrade\r\n" "Sec-WebSocket-Accept: %s\r\n" "WebSocket-Location: ws://%s%s\r\n\r\n"
magic_string = ‘258EAFA5-E914-47DA-95CA-C5AB0DC85B11‘
value = headers[‘Sec-WebSocket-Key‘] + magic_string
ac = base64.b64encode(hashlib.sha1(value.encode(‘utf-8‘)).digest())
response_str = response_tpl % (ac.decode(‘utf-8‘), headers[‘Host‘], headers[‘url‘])
# 响应【握手】信息
conn.send(bytes(response_str, encoding=‘utf-8‘))
...
...
...
客户端和服务端传输数据时，需要对数据进行【封包】和【解包】。客户端的JavaScript类库已经封装【封包】和【解包】过程，但Socket服务端需要手动实现。
第一步：获取客户端发送的数据【解包】
info = conn.recv(8096) payload_len = info[1] & 127 if payload_len == 126: extend_payload_len = info[2:4] mask = info[4:8] decoded = info[8:] elif payload_len == 127: extend_payload_len = info[2:10] mask = info[10:14] decoded = info[14:] else: extend_payload_len = None mask = info[2:6] decoded = info[6:] bytes_list = bytearray() for i in range(len(decoded)): chunk = decoded[i] ^ mask[i % 4] bytes_list.append(chunk) body = str(bytes_list, encoding=‘utf-8‘) print(body)
解包详细过程：
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-------+-+-------------+-------------------------------+ |F|R|R|R| opcode|M| Payload len | Extended payload length | |I|S|S|S| (4) |A| (7) | (16/64) | |N|V|V|V| |S| | (if payload len==126/127) | | |1|2|3| |K| | | +-+-+-+-+-------+-+-------------+ - - - - - - - - - - - - - - - + | Extended payload length continued, if payload len == 127 | + - - - - - - - - - - - - - - - +-------------------------------+ | |Masking-key, if MASK set to 1 | +-------------------------------+-------------------------------+ | Masking-key (continued) | Payload Data | +-------------------------------- - - - - - - - - - - - - - - - + : Payload Data continued ... : + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + | Payload Data continued ... | +---------------------------------------------------------------+
The MASK bit simply tells whether the message is encoded. Messages from the client must be masked, so your server should expect this to be 1. (In fact, section 5.1 of the spec says that your server must disconnect from a client if that client sends an unmasked message.) When sending a frame back to the client, do not mask it and do not set the mask bit. We‘ll explain masking later. Note: You have to mask messages even when using a secure socket.RSV1-3 can be ignored, they are for extensions.
The opcode field defines how to interpret the payload data: 0x0 for continuation, 0x1 for text (which is always encoded in UTF-8), 0x2 for binary, and other so-called "control codes" that will be discussed later. In this version of WebSockets, 0x3 to 0x7 and 0xB to 0xF have no meaning.
The FIN bit tells whether this is the last message in a series. If it‘s 0, then the server will keep listening for more parts of the message; otherwise, the server should consider the message delivered. More on this later.
Decoding Payload Length
To read the payload data, you must know when to stop reading. That‘s why the payload length is important to know. Unfortunately, this is somewhat complicated. To read it, follow these steps:
Reading and Unmasking the Data
If the MASK bit was set (and it should be, for client-to-server messages), read the next 4 octets (32 bits); this is the masking key. Once the payload length and masking key is decoded, you can go ahead and read that number of bytes from the socket. Let‘s call the data ENCODED, and the key MASK. To get DECODED, loop through the octets (bytes a.k.a. characters for text data) of ENCODED and XOR the octet with the (i modulo 4)th octet of MASK. In pseudo-code (that happens to be valid JavaScript):
var DECODED = "";
for (var i = 0; i < ENCODED.length; i++) {
DECODED[i] = ENCODED[i] ^ MASK[i % 4];
}
Now you can figure out what DECODED means depending on your application.
第二步：向客户端发送数据【封包】
def send_msg(conn, msg_bytes):
"""
WebSocket服务端向客户端发送消息
:param conn: 客户端连接到服务器端的socket对象,即： conn,address = socket.accept()
:param msg_bytes: 向客户端发送的字节
:return:
"""
import struct
token = b"\x81"
length = len(msg_bytes)
if length < 126:
token += struct.pack("B", length)
elif length <= 0xFFFF:
token += struct.pack("!BH", 126, length)
else:
token += struct.pack("!BQ", 127, length)
msg = token + msg_bytes
conn.send(msg)
return True
a. 基于Python socket实现的WebSocket服务端：
#!/usr/bin/env python
# -*- coding:utf-8 -*-
import socket
import base64
import hashlib
def get_headers(data):
"""
将请求头格式化成字典
:param data:
:return:
"""
header_dict = {}
data = str(data, encoding=‘utf-8‘)
header, body = data.split(‘\r\n\r\n‘, 1)
header_list = header.split(‘\r\n‘)
for i in range(0, len(header_list)):
if i == 0:
if len(header_list[i].split(‘ ‘)) == 3:
header_dict[‘method‘], header_dict[‘url‘], header_dict[‘protocol‘] = header_list[i].split(‘ ‘)
else:
k, v = header_list[i].split(‘:‘, 1)
header_dict[k] = v.strip()
return header_dict
def send_msg(conn, msg_bytes):
"""
WebSocket服务端向客户端发送消息
:param conn: 客户端连接到服务器端的socket对象,即： conn,address = socket.accept()
:param msg_bytes: 向客户端发送的字节
:return:
"""
import struct
token = b"\x81"
length = len(msg_bytes)
if length < 126:
token += struct.pack("B", length)
elif length <= 0xFFFF:
token += struct.pack("!BH", 126, length)
else:
token += struct.pack("!BQ", 127, length)
msg = token + msg_bytes
conn.send(msg)
return True
def run():
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
sock.bind((‘127.0.0.1‘, 8003))
sock.listen(5)
conn, address = sock.accept()
data = conn.recv(1024)
headers = get_headers(data)
response_tpl = "HTTP/1.1 101 Switching Protocols\r\n" "Upgrade:websocket\r\n" "Connection:Upgrade\r\n" "Sec-WebSocket-Accept:%s\r\n" "WebSocket-Location:ws://%s%s\r\n\r\n"
value = headers[‘Sec-WebSocket-Key‘] + ‘258EAFA5-E914-47DA-95CA-C5AB0DC85B11‘
ac = base64.b64encode(hashlib.sha1(value.encode(‘utf-8‘)).digest())
response_str = response_tpl % (ac.decode(‘utf-8‘), headers[‘Host‘], headers[‘url‘])
conn.send(bytes(response_str, encoding=‘utf-8‘))
while True:
try:
info = conn.recv(8096)
except Exception as e:
info = None
if not info:
break
payload_len = info[1] & 127
if payload_len == 126:
extend_payload_len = info[2:4]
mask = info[4:8]
decoded = info[8:]
elif payload_len == 127:
extend_payload_len = info[2:10]
mask = info[10:14]
decoded = info[14:]
else:
extend_payload_len = None
mask = info[2:6]
decoded = info[6:]
bytes_list = bytearray()
for i in range(len(decoded)):
chunk = decoded[i] ^ mask[i % 4]
bytes_list.append(chunk)
body = str(bytes_list, encoding=‘utf-8‘)
send_msg(conn,body.encode(‘utf-8‘))
sock.close()
if __name__ == ‘__main__‘:
run()
b. 利用JavaScript类库实现客户端
<!DOCTYPE html>
<html>
<head lang="en">
<meta charset="UTF-8">
<title></title>
</head>
<body>
<div>
<input type="text" id="txt"/>
<input type="button" id="btn" value="提交" onclick="sendMsg();"/>
<input type="button" id="close" value="关闭连接" onclick="closeConn();"/>
</div>
<div id="content"></div>
<script type="text/javascript">
var socket = new WebSocket("ws://127.0.0.1:8003/chatsocket");
socket.onopen = function () {
/* 与服务器端连接成功后，自动执行 */
var newTag = document.createElement(‘div‘);
newTag.innerHTML = "【连接成功】";
document.getElementById(‘content‘).appendChild(newTag);
};
socket.onmessage = function (event) {
/* 服务器端向客户端发送数据时，自动执行 */
var response = event.data;
var newTag = document.createElement(‘div‘);
newTag.innerHTML = response;
document.getElementById(‘content‘).appendChild(newTag);
};
socket.onclose = function (event) {
/* 服务器端主动断开连接时，自动执行 */
var newTag = document.createElement(‘div‘);
newTag.innerHTML = "【关闭连接】";
document.getElementById(‘content‘).appendChild(newTag);
};
function sendMsg() {
var txt = document.getElementById(‘txt‘);
socket.send(txt.value);
txt.value = "";
}
function closeConn() {
socket.close();
var newTag = document.createElement(‘div‘);
newTag.innerHTML = "【关闭连接】";
document.getElementById(‘content‘).appendChild(newTag);
}
</script>
</body>
</html>
Tornado是一个支持WebSocket的优秀框架，其内部原理正如1~5步骤描述，当然Tornado内部封装功能更加完整。
以下是基于Tornado实现的聊天室示例：
#!/usr/bin/env python # -*- coding:utf-8 -*- import uuid import json import tornado.ioloop import tornado.web import tornado.websocket class IndexHandler(tornado.web.RequestHandler): def get(self): self.render(‘index.html‘) class ChatHandler(tornado.websocket.WebSocketHandler): # 用户存储当前聊天室用户 waiters = set() # 用于存储历时消息 messages = [] def open(self): """ 客户端连接成功时，自动执行 :return: """ ChatHandler.waiters.add(self) uid = str(uuid.uuid4()) self.write_message(uid) for msg in ChatHandler.messages: content = self.render_string(‘message.html‘, **msg) self.write_message(content) def on_message(self, message): """ 客户端连发送消息时，自动执行 :param message: :return: """ msg = json.loads(message) ChatHandler.messages.append(message) for client in ChatHandler.waiters: content = client.render_string(‘message.html‘, **msg) client.write_message(content) def on_close(self): """ 客户端关闭连接时，，自动执行 :return: """ ChatHandler.waiters.remove(self) def run(): settings = { ‘template_path‘: ‘templates‘, ‘static_path‘: ‘static‘, } application = tornado.web.Application([ (r"/", IndexHandler), (r"/chat", ChatHandler), ], **settings) application.listen(8888) tornado.ioloop.IOLoop.instance().start() if __name__ == "__main__": run() app.py
1 <!DOCTYPE html> 2 <html lang="en"> 3 <head> 4 <meta charset="UTF-8"> 5 <title>Python聊天室</title> 6 </head> 7 <body> 8 <div> 9 <input type="text" id="txt"/> 10 <input type="button" id="btn" value="提交" onclick="sendMsg();"/> 11 <input type="button" id="close" value="关闭连接" onclick="closeConn();"/> 12 </div> 13 <div id="container" style="border: 1px solid #dddddd;margin: 20px;min-height: 500px;"> 14 15 </div> 16 17 <script src="/static/jquery-2.1.4.min.js"></script> 18 <script type="text/javascript"> 19 $(function () { 20 wsUpdater.start(); 21 }); 22 23 var wsUpdater = { 24 socket: null, 25 uid: null, 26 start: function() { 27 var url = "ws://127.0.0.1:8888/chat"; 28 wsUpdater.socket = new WebSocket(url); 29 wsUpdater.socket.onmessage = function(event) { 30 console.log(event); 31 if(wsUpdater.uid){ 32 wsUpdater.showMessage(event.data); 33 }else{ 34 wsUpdater.uid = event.data; 35 } 36 } 37 }, 38 showMessage: function(content) { 39 $(‘#container‘).append(content); 40 } 41 }; 42 43 function sendMsg() { 44 var msg = { 45 uid: wsUpdater.uid, 46 message: $("#txt").val() 47 }; 48 wsUpdater.socket.send(JSON.stringify(msg)); 49 } 50 51 </script> 52 53 </body> 54 </html> 55 56 index.html
标签：turn too 加密 执行 else rem handler highlight ddd
原文地址：http://www.cnblogs.com/sunkai1993/p/6900528.html
