09-linux基础六

时间：2017-06-01 10:30:57 阅读：399 评论：0 收藏：0 [点我收藏+]

标签：window otp 文件 row forward win10 wget processes lib

部署Samba服务器

1）配置安装环境

　　为保证windows系统的计算机能够访问Linux Samba服务器，需要对Samba服务器进行网络配置，同时关闭Linux防火墙和SELinux。

　　1.1网络配置

vim /etc/sysconfig/network-scripts/ifcfg-ens33
　　可选择BOOTPROTO=dhcp，由DHCP服务器自动为虚拟机分配地址，配置文件如下：

TYPE="Ethernet"
BOOTPROTO="dhcp"
DEFROUTE="yes"
PEERDNS="yes"
PEERROUTES="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="ens33"
UUID="5102dc8b-560a-4ed4-a4ee-a09fad011f87"
DEVICE="ens33"
ONBOOT="yes"

　　也可选择BOOTPROTO=static，此时需要配置NETMASK、GATEWAY、DNS等，注意需设置ONBOOT=yes

TYPE=Ethernet
BOOTPROTO=static
IPADDR=192.168.16.253
NETMASK=255.255.255.0
GATEWAY=192.168.16.254
DNS1=192.168.12.254
DNS2=8.8.8.8
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=e5c7d4f1-bb4b-487b-9eb1-443803ff9559
DEVICE=ens33
ONBOOT=yes

　　1.2）关闭防火墙

[root@bogon ~]# systemctl status firewalld.service #查看防火墙状态
[root@bogon ~]# systemctl stop firewalld.service #关闭防火墙
[root@bogon ~]# systemctl disabled firewalld.service #取消防火墙开机运行

　　1.3）关闭SELINX

　　setenforce 0　　#关闭防火墙，临时生效

　　为使防火墙永久关闭，需修改配置文件

　　vim /etc/sysconfig/selinux 或 vim /etc/selinux/config

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three two values:
# targeted - Targeted processes are protected,
# minimum - Modification of targeted policy. Only selected processes are protected. 
# mls - Multi Level Security protection.
SELINUXTYPE=targeted

2）安装软件包

[root@bogon ~]# yum -y install samba
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
* base: mirrors.btte.net
* extras: mirrors.neusoft.edu.cn
* updates: mirror.bit.edu.cn
...
...
...

2）挂载网盘

　　2.1为虚拟机添加一块硬盘

　　2.2将添加的硬盘格式化

mkfs.xfs /dev/sdb -f
　　2.3创建共享目录/share，将格式化后的硬盘挂载到/share目录下

mount /dev/sdb /share
3）添加系统用户

　　为了在windows中访问Samba，需添加系统用户，同时可限定添加的用户不可登录终端

[root@bogon ~]# useradd egon
[root@bogon ~]#
[root@bogon ~]# usermod -s /sbin/nologin egon
[root@bogon ~]#
[root@bogon ~]# smbpasswd -a egon
New SMB password:
Retype new SMB password:
Added user egon.
[root@bogon ~]#
[root@bogon ~]# useradd alex
[root@bogon ~]#
[root@bogon ~]# usermod -s /sbin/nologin alex
[root@bogon ~]#
[root@bogon ~]# smbpasswd -a alex
New SMB password:
Retype new SMB password:
Added user alex.
[root@bogon ~]#
[root@bogon ~]# useradd wupeiqi
[root@bogon ~]#
[root@bogon ~]# usermod -s /sbin/nologin wupeiqi
[root@bogon ~]#
[root@bogon ~]# smbpasswd -a wupeiqi
New SMB password:
Retype new SMB password:
Added user wupeiqi.
[root@bogon ~]#

4）启动服务

[root@bogon ~]# systemctl start smb
[root@bogon ~]#

5）测试（win10系统笔记本电脑访问CentOS7.3系统的虚拟机）

　　1）此电脑====》映射网络驱动器(N)====>文件夹中键入：\\192.168.1.254\egon====>输入密码，如下图（可在文件中添加或删除文件）

技术分享

　　查看Samba服务器对应的文件

[root@bogon ~]# ls /home/egon/
tmp.txt
[root@bogon ~]#

6）修改配置文件，使所有的用户共享一个目录，只能浏览内容，不能删。

[root@bogon ~]# vim /etc/samba/smb.conf
# See smb.conf.example for a more detailed config file or
# read the smb.conf manpage.
# Run ‘testparm‘ to verify the config is correct after
# you modified it.

[global]
workgroup = SAMBA
security = user

passdb backend = tdbsam

printing = cups
printcap name = cups
load printers = yes
cups options = raw

[homes]
comment = Home Directories
valid users = %S, %D%w%S
browseable = No
read only = No
inherit acls = Yes

[printers]
comment = All Printers
path = /var/tmp
printable = Yes
create mask = 0600
browseable = No

[print$]
comment = Printer Drivers
path = /var/lib/samba/drivers
write list = root
create mask = 0664
directory mask = 0775


# A publicly accessible directory that is read only, except for users in the
# "staff" group (which have write permissions):
[public]
comment = Public Stuff
path = /share
public = yes
writable = no
printable = no
write list = +staff

部署nginx服务器

1）配置安装环境（同上）

2）安装软件包

　　2.1下载软件包

[root@bogon software]# wget http://nginx.org/download/nginx-1.12.0.tar.gz
--2017-06-01 01:13:20-- http://nginx.org/download/nginx-1.12.0.tar.gz
Resolving nginx.org (nginx.org)... 206.251.255.63, 95.211.80.227, 2001:1af8:4060:a004:21::e3, ...
Connecting to nginx.org (nginx.org)|206.251.255.63|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 980831 (958K) [application/octet-stream]
Saving to: ‘nginx-1.12.0.tar.gz’

100%[=======================================================================================>] 980,831 41.7KB/s in 24s

2017-06-01 01:13:45 (40.2 KB/s) - ‘nginx-1.12.0.tar.gz’ saved [980831/980831]

[root@bogon software]#

　　2.2解压软件包

[root@bogon software]# ls
nginx-1.12.0.tar.gz Python-3.6.1 Python-3.6.1.tgz
[root@bogon software]# 
[root@bogon software]# tar -zxvf nginx-1.12.0.tar.gz 
nginx-1.12.0/
nginx-1.12.0/auto/
nginx-1.12.0/conf/
...
...
...
...

　　2.3配置安装选项

[root@bogon software]# cd nginx-1.12.0/
[root@bogon nginx-1.12.0]# 
[root@bogon nginx-1.12.0]# ./configure --prefix=/usr/local/nginx --without-http_rewrite_module
checking for OS
+ Linux 3.10.0-514.el7.x86_64 x86_64
checking for C compiler ... found
+ using GNU C compiler
+ gcc version: 4.8.5 20150623 (Red Hat 4.8.5-11) (GCC) 
checking for gcc -pipe switch ... found
checking for -Wl,-E switch ... found
checking for gcc builtin atomic operations ... found
checking for C99 variadic macros ... found

　　2.4编译和安装

[root@bogon software]# make && make install
...
...
...
test -d ‘/usr/local/nginx/html‘ || cp -R html ‘/usr/local/nginx‘
test -d ‘/usr/local/nginx/logs‘ || mkdir -p ‘/usr/local/nginx/logs‘
make[1]: Leaving directory `/software/nginx-1.12.0‘
[root@bogon nginx-1.12.0]#

3）修改配置文件

[root@bogon nginx-1.12.0]# vim /usr/local/nginx/conf/nginx.conf

#user nobody;
worker_processes 3; #nginx启动的子进程个数

#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;

#pid logs/nginx.pid;


events {
worker_connections 1024;
}


http {
include mime.types;
default_type application/octet-stream;

#log_format main ‘$remote_addr - $remote_user [$time_local] "$request" ‘
# ‘$status $body_bytes_sent "$http_referer" ‘
# ‘"$http_user_agent" "$http_x_forwarded_for"‘;

#access_log logs/access.log main;

sendfile on;
#tcp_nopush on;

#keepalive_timeout 0;
keepalive_timeout 65;

#gzip on;

server {
listen 8080;　　　　　　#nginx服务监听的端口
server_name localhost;

#charset koi8-r;

#access_log logs/host.access.log main;

location / {
root html;
index index.html index.htm index.txt; #默认加载的主页文件
}

#error_page 404 /404.html;

# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}

# proxy the PHP scripts to Apache listening on 127.0.0.1:80
#
#location ~ \.php$ {
# proxy_pass http://127.0.0.1;
#}

# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
#location ~ \.php$ {
# root html;
# fastcgi_pass 127.0.0.1:9000;
# fastcgi_index index.php;
# fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
# include fastcgi_params;
#}

# deny access to .htaccess files, if Apache‘s document root
# concurs with nginx‘s one
#
#location ~ /\.ht {
# deny all;
#}
}


# another virtual host using mix of IP-, name-, and port-based configuration
#
#server {
# listen 8000; 
# listen somename:8080;
# server_name somename alias another.alias;

# location / {
# root html;
# index index.html index.htm;
# }
#}


# HTTPS server
#
#server {
# listen 443 ssl;
# server_name localhost;

# ssl_certificate cert.pem;
# ssl_certificate_key cert.key;

# ssl_session_cache shared:SSL:1m;
# ssl_session_timeout 5m;

# ssl_ciphers HIGH:!aNULL:!MD5;
# ssl_prefer_server_ciphers on;

# location / {
# root html;
# index index.html index.htm;
# }
#}

}

4）启动服务

[root@bogon nginx-1.12.0]# /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
[root@bogon nginx-1.12.0]#
5）测试

　　在浏览器器中输入主机名称和对应的端口，打开了index.html页面，配置成功

技术分享

　　查看nginx启动的进程，如下（一个主进程和3个子进程启动），说明配置文件生效

[root@bogon~]# ps aux | grep nginx | grep -v grep 
root 15354 0.0 0.1 18024 1320 ? Ss 01:33 0:00 nginx: master process /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf 
nobody 15646 0.0 0.1 20556 1708 ? S 02:00 0:00 nginx: worker process 
nobody 15647 0.0 0.1 20556 1464 ? S 02:00 0:00 nginx: worker process 
nobody 15648 0.0 0.1 20556 1464 ? S 02:00 0:00 nginx: worker process

　　追踪配置文件/usr/local/nginx/logs/access.log的变化（刷新页面，查看配置文件的变化）

[root@bogon ~]# tail -f /usr/local/nginx/logs/access.log 
192.168.16.50 - - [01/Jun/2017:02:13:56 +0800] "GET / HTTP/1.1" 304 0 "-" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/58.0.3029.110 Safari/537.36"

6）负载均衡配置

　　6.1打开四台虚拟机，分别进行IP地址的配置，选择桥接，分别修改/etc/sysconfig/network-scripts/ifcfg-ens33
　　　　192.168.16.252（教室）或192.168.1.154

　　　　192.168.16.251（教室）或192.168.1.253

　　　　192.168.16.250（教室）或192.168.1.252
　　　　192.168.16.249（教室）或192.168.1.251

　　其中1个配置文件如下：

TYPE=Ethernet
#BOOTPROTO=dhcp
BOOTPROTO=static
IPADDR=192.168.16.250
NETMASK=255.255.255.0
GATEWAY=192.168.16.254
DNS1=192.168.12.254
DNS2=8.8.8.8
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=e5c7d4f1-bb4b-487b-9eb1-443803ff9559
DEVICE=ens33
ONBOOT=yes

　　6.2修改nginx配置文件（其中负载均衡服务器端口为80，其他3台服务器端口为8080）

　　负载均衡服务器配置文件如下：

#user  nobody;
worker_processes  3;

#error_log  logs/error.log;
#error_log  logs/error.log  notice;
#error_log  logs/error.log  info;

#pid        logs/nginx.pid;


events {
    worker_connections  1024;
}


http {
#    upstream nginx_webs {
#    server 192.168.16.252:8080;
#    server 192.168.16.251:8080;
#    server 192.168.16.250:8080;
#    }
    upstream nginx_webs {
    server 192.168.1.254:8080;
    server 192.168.1.253:8080;
    server 192.168.1.252:8080;
    }
    include       mime.types;
    default_type  application/octet-stream;

    #log_format  main  ‘$remote_addr - $remote_user [$time_local] "$request" ‘
    #                  ‘$status $body_bytes_sent "$http_referer" ‘
    #                  ‘"$http_user_agent" "$http_x_forwarded_for"‘;

    #access_log  logs/access.log  main;

    sendfile        on;
    #tcp_nopush     on;

    #keepalive_timeout  0;
    keepalive_timeout  65;

    #gzip  on;

    server {
        listen       80;
        server_name  localhost;

        #charset koi8-r;

        #access_log  logs/host.access.log  main;

        location / {
           proxy_pass http://nginx_webs; 
        }

        #error_page  404              /404.html;

        # redirect server error pages to the static page /50x.html
        #
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        }

        # proxy the PHP scripts to Apache listening on 127.0.0.1:80
        #
        #location ~ \.php$ {
        #    proxy_pass   http://127.0.0.1;
        #}

        # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
        #
        #location ~ \.php$ {
        #    root           html;
        #    fastcgi_pass   127.0.0.1:9000;
        #    fastcgi_index  index.php;
        #    fastcgi_param  SCRIPT_FILENAME  /scripts$fastcgi_script_name;
        #    include        fastcgi_params;
        #}

        # deny access to .htaccess files, if Apache‘s document root
        # concurs with nginx‘s one
        #
        #location ~ /\.ht {
        #    deny  all;
        #}
    }


    # another virtual host using mix of IP-, name-, and port-based configuration
    #
    #server {
    #    listen       8000;
    #    listen       somename:8080;
    #    server_name  somename  alias  another.alias;

    #    location / {
    #        root   html;
    #        index  index.html index.htm;
    #    }
    #}


    # HTTPS server
    #
    #server {
    #    listen       443 ssl;
    #    server_name  localhost;

    #    ssl_certificate      cert.pem;
    #    ssl_certificate_key  cert.key;

    #    ssl_session_cache    shared:SSL:1m;
    #    ssl_session_timeout  5m;

    #    ssl_ciphers  HIGH:!aNULL:!MD5;
    #    ssl_prefer_server_ciphers  on;

    #    location / {
    #        root   html;
    #        index  index.html index.htm;
    #    }
    #}

}

　　其他三台Web服务器配置文件如下：

#user  nobody;
worker_processes  3;

#error_log  logs/error.log;
#error_log  logs/error.log  notice;
#error_log  logs/error.log  info;

#pid        logs/nginx.pid;


events {
    worker_connections  1024;
}


http {
    include       mime.types;
    default_type  application/octet-stream;

    #log_format  main  ‘$remote_addr - $remote_user [$time_local] "$request" ‘
    #                  ‘$status $body_bytes_sent "$http_referer" ‘
    #                  ‘"$http_user_agent" "$http_x_forwarded_for"‘;

    #access_log  logs/access.log  main;

    sendfile        on;
    #tcp_nopush     on;

    #keepalive_timeout  0;
    keepalive_timeout  65;

    #gzip  on;

    server {
        listen       8080;
        server_name  localhost;

        #charset koi8-r;

        #access_log  logs/host.access.log  main;

        location / {
            root   html;
            index  index.txt index.html index.htm;
        #    index  index.html index.html index.txt;
        }

        #error_page  404              /404.html;

        # redirect server error pages to the static page /50x.html
        #
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        }

        # proxy the PHP scripts to Apache listening on 127.0.0.1:80
        #
        #location ~ \.php$ {
        #    proxy_pass   http://127.0.0.1;
        #}

        # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
        #
        #location ~ \.php$ {
        #    root           html;
        #    fastcgi_pass   127.0.0.1:9000;
        #    fastcgi_index  index.php;
        #    fastcgi_param  SCRIPT_FILENAME  /scripts$fastcgi_script_name;
        #    include        fastcgi_params;
        #}

        # deny access to .htaccess files, if Apache‘s document root
        # concurs with nginx‘s one
        #
        #location ~ /\.ht {
        #    deny  all;
        #}
    }


    # another virtual host using mix of IP-, name-, and port-based configuration
    #
    #server {
    #    listen       8000;
    #    listen       somename:8080;
    #    server_name  somename  alias  another.alias;

    #    location / {
    #        root   html;
    #        index  index.html index.htm;
    #    }
    #}


    # HTTPS server
    #
    #server {
    #    listen       443 ssl;
    #    server_name  localhost;

    #    ssl_certificate      cert.pem;
    #    ssl_certificate_key  cert.key;

    #    ssl_session_cache    shared:SSL:1m;
    #    ssl_session_timeout  5m;

    #    ssl_ciphers  HIGH:!aNULL:!MD5;
    #    ssl_prefer_server_ciphers  on;

    #    location / {
    #        root   html;
    #        index  index.html index.htm;
    #    }
    #}

}

　　依次启动负载均衡服务器和三台Web服务器

[root@bogon ~]# /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf 
[root@bogon ~]#

　　6.3测试

　　在goolge浏览器中输入192.168.1.251（负载均衡服务器IP地址），并刷新，如下图：

技术分享

09-linux基础六

标签：window otp 文件 row forward win10 wget processes lib

原文地址：http://www.cnblogs.com/NewTaul/p/6926482.html

踩

(0)

评论一句话评论（0）

分享档案

更多>

2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)

周排行