标签：filesystem raid swap
1、创建一个10G分区，并格式为ext4文件系统；
(1) 要求其block大小为2048, 预留空间百分比为2, 卷标为MYDATA, 默认挂载属性包含acl；
创建分区
[root@localhost Desktop]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xd1fd27d7.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-41943039, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): +10G
Partition 1 of type Linux and of size 10 GiB is set
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@localhost Desktop]# partx -a /dev/sdb
partx: /dev/sdb: error adding partition 1指定block大小，预留空间百分比及卷标
[root@localhost Desktop]# mke2fs -t ext4 -b 2048 -m 2 -L ‘MYDATA‘ /dev/sdb1 mke2fs 1.42.9 (28-Dec-2013) Filesystem label=MYDATA OS type: Linux Block size=2048 (log=1) Fragment size=2048 (log=1) Stride=0 blocks, Stripe width=0 blocks 655360 inodes, 5242880 blocks 104857 blocks (2.00%) reserved for the super user First data block=0 Maximum filesystem blocks=273678336 320 block groups 16384 blocks per group, 16384 fragments per group 2048 inodes per group Superblock backups stored on blocks: 16384, 49152, 81920, 114688, 147456, 409600, 442368, 802816, 1327104, 2048000, 3981312 Allocating group tables: done Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done
添加acl挂载属性
[root@localhost Desktop]# tune2fs -o acl /dev/sdb1 tune2fs 1.42.9 (28-Dec-2013)
(2) 挂载至/data/mydata目录，要求挂载时禁止程序自动运行，且不更新文件的访问时间戳；
[root@localhost Desktop]# mkdir -p /data/mydata [root@localhost Desktop]# mount -o noexec,noatime /dev/sdb1 /data/mydata/
2、创建一个大小为1G的swap分区，并创建好文件系统，并启用之；
创建分区
[root@localhost Desktop]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (2-4, default 2):
First sector (20973568-41943039, default 20973568):
Using default value 20973568
Last sector, +sectors or +size{K,M,G} (20973568-41943039, default 41943039): +1G
Partition 2 of type Linux and of size 1 GiB is set
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@localhost Desktop]# partx -a /dev/sdb
partx: /dev/sdb: error adding partition 1写入文件系统fstab
[root@localhost Desktop]# mkswap /dev/sdb2 Setting up swapspace version 1, size = 1048572 KiB no label, UUID=2f3ba372-bac4-4846-b833-636eb3d97303 [root@localhost Desktop]# vim /etc/fstab [root@localhost Desktop]# cat /etc/fstab | grep swap /dev/mapper/rhel-swap swap swap defaults 0 0 UUID=2f3ba372-bac4-4846-b833-636eb3d97303swapswap defaults0 0 [root@localhost Desktop]# mount -a
启用swap分区
[root@localhost Desktop]# swapon -a [root@localhost Desktop]# free -m total used free shared buffers cached Mem: 1826 868 958 9 1 283 -/+ buffers/cache: 583 1243 Swap: 3071 0 3071
3、写一个脚本
(1) 获取并列出当前系统上的所有磁盘设备；
(2) 显示每个磁盘设备上每个分区相关的空间使用信息；
#!/bin/bash
echo "disk info:"
fdisk -l /dev/[sh]d[a-z]
echo
echo "partition info:"
for disk in $(fdisk -l | grep -o "^Disk /dev/[sh]d[a-z]" | cut -d‘ ‘ -f2); do
echo $disk
declare -i i=1
while [ $i -le $(fdisk -l $disk | grep "^/dev/[sh]d[a-z][0-9]" | wc -l) ]; do
df -Th ${disk}${i} | tail -1
let i++
done
echo
done4、总结RAID的各个级别及其组合方式和性能的不同；
RAID-0: 条带卷，strip
特点：读、写性能提升；无容错能力
可用空间：N*min(S1,S2,...)
最少磁盘数：2
RAID-1：镜像卷，mirror
优点：读性能提升、写性能略有下降；有冗余能力
可用空间：1*min(S1,S2,...)
最少磁盘数：2
RAID-5：
特点：读、写性能提升；有容错能力：1块磁盘
可用空间：(N-1)*min(S1,S2,...)
最少磁盘数：3
RAID-6：
特点：读、写性能提升；有容错能力：2块磁盘
可用空间：(N-2)*min(S1,S2,...)
最少磁盘数：4
混合类型
RAID-10：读、写性能提升；有容错能力：每组镜像最多只能坏1块
可用空间：N*min(S1,S2,...)/2
最少磁盘数：4
JBOD：Just a Bunch Of Disks
功能：将多块磁盘的空间合并一个大的连续空间使用
可用空间：sum(S1,S2,...)
5、创建一个大小为10G的RAID1，要求有一个空闲盘，而且CHUNK大小为128k；
[root@localhost Desktop]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xba3edeaa.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-41943039, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): +10G
Partition 1 of type Linux and of size 10 GiB is set
Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): fd
Changed type of partition ‘Linux‘ to ‘Linux raid autodetect‘
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@localhost Desktop]# fdisk /dev/sdc
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x2b6abd80.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-41943039, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): +10G
Partition 1 of type Linux and of size 10 GiB is set
Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): fd
Changed type of partition ‘Linux‘ to ‘Linux raid autodetect‘
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@localhost Desktop]# fdisk /dev/sdd
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xde9307db.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-41943039, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): +10G
Partition 1 of type Linux and of size 10 GiB is set
Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): fd
Changed type of partition ‘Linux‘ to ‘Linux raid autodetect‘
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@localhost Desktop]# partprobe
[root@localhost Desktop]# mdadm -C /dev/md1 -a yes -c 128K -l 1 -n 2 -x 1 /dev/sdb1 /dev/sdc1 /dev/sdd1
[root@localhost Desktop]# mdadm -D /dev/md1
/dev/md1:
Version : 1.2
Creation Time : Wed May 31 22:46:16 2017
Raid Level : raid1
Array Size : 10477440 (9.99 GiB 10.73 GB)
Used Dev Size : 10477440 (9.99 GiB 10.73 GB)
Raid Devices : 2
Total Devices : 3
Persistence : Superblock is persistent
Update Time : Wed May 31 22:47:08 2017
State : active
Active Devices : 2
Working Devices : 3
Failed Devices : 0
Spare Devices : 1
Name : localhost.localdomain:1 (local to host localhost.localdomain)
UUID : d627c232:7ff80074:285fe4c7:6fc0a6bf
Events : 18
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
1 8 33 1 active sync /dev/sdc1
2 8 49 - spare /dev/sdd16、创建一个大小为4G的RAID5设备，chunk大小为256k，格式化ext4文件系统，要求可开机自动挂载至/backup目录，而且不更新访问时间戳，且支持acl功能；
[root@localhost Desktop]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (2-4, default 2):
First sector (20973568-41943039, default 20973568):
Using default value 20973568
Last sector, +sectors or +size{K,M,G} (20973568-41943039, default 41943039): +4G
Partition 2 of type Linux and of size 4 GiB is set
Command (m for help): t
Partition number (1,2, default 2): 2
Hex code (type L to list all codes): fd
Changed type of partition ‘Linux‘ to ‘Linux raid autodetect‘
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@localhost Desktop]# fdisk /dev/sdc
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (2-4, default 2):
First sector (20973568-41943039, default 20973568):
Using default value 20973568
Last sector, +sectors or +size{K,M,G} (20973568-41943039, default 41943039): +4G
Partition 2 of type Linux and of size 4 GiB is set
Command (m for help): t
Partition number (1,2, default 2): 2
Hex code (type L to list all codes): fd
Changed type of partition ‘Linux‘ to ‘Linux raid autodetect‘
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@localhost Desktop]# fdisk /dev/sdd
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (2-4, default 2):
First sector (20973568-41943039, default 20973568):
Using default value 20973568
Last sector, +sectors or +size{K,M,G} (20973568-41943039, default 41943039): +4G
Partition 2 of type Linux and of size 4 GiB is set
Command (m for help): t
Partition number (1,2, default 2): 2
Hex code (type L to list all codes): fd
Changed type of partition ‘Linux‘ to ‘Linux raid autodetect‘
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@localhost Desktop]# partprobe
[root@localhost Desktop]# mdadm -C /dev/md5 -a yes -c 256K -l 5 -n 3 /dev/sdb2 /dev/sdc2 /dev/sdd2
[root@localhost Desktop]# mdadm -D /dev/md5
/dev/md5:
Version : 1.2
Creation Time : Wed May 31 23:23:25 2017
Raid Level : raid5
Array Size : 8384000 (8.00 GiB 8.59 GB)
Used Dev Size : 4192000 (4.00 GiB 4.29 GB)
Raid Devices : 3
Total Devices : 3
Persistence : Superblock is persistent
Update Time : Wed May 31 23:23:46 2017
State : clean
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 256K
Name : localhost.localdomain:5 (local to host localhost.localdomain)
UUID : 2dd21526:ded34170:a50dd479:4324cab9
Events : 20
Number Major Minor RaidDevice State
0 8 18 0 active sync /dev/sdb2
1 8 34 1 active sync /dev/sdc2
3 8 50 2 active sync /dev/sdd2
[root@localhost Desktop]# mke2fs -t ext4 /dev/md5
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=64 blocks, Stripe width=128 blocks
524288 inodes, 2096000 blocks
104800 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2147483648
64 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
[root@localhost Desktop]# mkdir /backup
[root@localhost Desktop]# vim /etc/fstab
[root@localhost Desktop]# tail -1 /etc/fstab
/dev/md5/backupext4defaults,acl,noatime 0 0
[root@localhost Desktop]# mount -a标签：filesystem raid swap
原文地址：http://941641.blog.51cto.com/931641/1931215
