标签：bsp 常用操作 数据 sla 开源 mail wap triggers creating
一个朋友问我在线对大表进行ddl操作，如何做能尽量避免主从延迟以及不影响在线dml操作呢？我想到一个开源的pt-online-schema-change工具，测试了吧，效果还可以。
pt-online-schema-change原理
1、如果存在外键，根据alter-foreign-keys-method参数的值，检测外键相关的表，做相应设置的处理。
2、创建一个新的表，表结构为修改后的数据表，用于从源数据表向新表中导入数据。
3、创建触发器，用于记录从拷贝数据开始之后，对源数据表继续进行数据修改的操作记录下来，用于数据拷贝结束后，执行这些操作，保证数据不会丢失。
4、拷贝数据，从源数据表中拷贝数据到新表中。
5、修改外键相关的子表，根据修改后的数据，修改外键关联的子表。
6、rename源数据表为old表，把新表rename为源表名，并将old表删除。
7、删除触发器。
tar -zxvf DBI-1.625.tar.gz
cd DBI-1.625
perl Makefile.PL
make
make install
# 安装DBD-MySQL插件
tar -zxvf DBD-mysql-4.023.tar.gz
cd DBD-mysql-4.023
perl Makefile.PL
make
make install
安装percona-toolkit，pt-online-schema-change 是percona里面的组件之一，通常安装好percona-toolkit之后，基本就能直接用：
##Install percona-toolkit
wget percona.com/get/percona-toolkit.tar.gz
tar -zxvf percona-toolkit-2.2.16.tar.gz
cd percona-toolkit-2.2.16
perl Makefile.PL
make
make install
命令：
time pt-online-schema-change –host=192.168.121.91 –port=3307 –user=tim –password=”timisgood” –alter=”add column C_N varchar(64)” –execute D=test,t=UC_USER –set-vars innodb_lock_wait_timeout=50 –no-check-replication-filters
执行过程
[root@hch_test_121_91 ~]# time pt-online-schema-change --host=192.168.121.91 --port=3307 --user=tim --password="timisgood" --alter="add column C_N varchar(64)" --execute D=test,t=UC_USER --set-vars innodb_lock_wait_timeout=50 --no-check-replication-filters
No slaves found. See --recursion-method if host hch_test_121_91 has slaves.
Not checking slave lag because no slaves were found and --check-slave-lag was not specified.
Operation, tries, wait:
analyze_table, 10, 1
copy_rows, 10, 0.25
create_triggers, 10, 1
drop_triggers, 10, 1
swap_tables, 10, 1
update_foreign_keys, 10, 1
Altering `test`.`UC_USER`...
Creating new table...
Created new table test._UC_USER_new OK.
Altering new table...
Altered `test`.`_UC_USER_new` OK.
2017-07-06T11:25:34 Creating triggers...
2017-07-06T11:25:34 Created triggers OK.
2017-07-06T11:25:34 Copying approximately 1457112 rows...
Copying `test`.`UC_USER`: 21% 01:49 remain
Copying `test`.`UC_USER`: 42% 01:20 remain
Copying `test`.`UC_USER`: 62% 00:54 remain
Copying `test`.`UC_USER`: 91% 00:11 remain
2017-07-06T11:27:45 Copied rows OK.
2017-07-06T11:27:45 Analyzing new table...
2017-07-06T11:27:45 Swapping tables...
2017-07-06T11:27:45 Swapped original and new tables OK.
2017-07-06T11:27:45 Dropping old table...
2017-07-06T11:27:46 Dropped old table `test`.`_UC_USER_old` OK.
2017-07-06T11:27:46 Dropping triggers...
2017-07-06T11:27:46 Dropped triggers OK.
Successfully altered `test`.`UC_USER`.
real 2m12.995s
user 0m0.869s
sys 0m0.160s
[root@hch_test_121_91 ~]#
命令：
time pt-online-schema-change –host=192.168.121.91 –port=3307 –user=tim –password=”timisgood” –alter=”modify column C_N varchar(128) default 0” –execute D=test,t=UC_USER –set-vars innodb_lock_wait_timeout=50 –no-check-replication-filters
执行过程：
[root@hch_test_121_91 ~]# time pt-online-schema-change --host=192.168.121.91 --port=3307 --user=tim --password="timisgood" --alter="modify column C_N varchar(128) default 0" --execute D=test,t=UC_USER --set-vars innodb_lock_wait_timeout=50 --no-check-replication-filters
No slaves found. See --recursion-method if host hch_test_121_91 has slaves.
Not checking slave lag because no slaves were found and --check-slave-lag was not specified.
Operation, tries, wait:
analyze_table, 10, 1
copy_rows, 10, 0.25
create_triggers, 10, 1
drop_triggers, 10, 1
swap_tables, 10, 1
update_foreign_keys, 10, 1
Altering `test`.`UC_USER`...
Creating new table...
Created new table test._UC_USER_new OK.
Altering new table...
Altered `test`.`_UC_USER_new` OK.
2017-07-05T19:08:46 Creating triggers...
2017-07-05T19:08:46 Created triggers OK.
2017-07-05T19:08:46 Copying approximately 1457112 rows...
Copying `test`.`UC_USER`: 23% 01:36 remain
Copying `test`.`UC_USER`: 51% 00:56 remain
Copying `test`.`UC_USER`: 71% 00:36 remain
Copying `test`.`UC_USER`: 91% 00:11 remain
2017-07-05T19:11:02 Copied rows OK.
2017-07-05T19:11:02 Analyzing new table...
2017-07-05T19:11:02 Swapping tables...
2017-07-05T19:11:02 Swapped original and new tables OK.
2017-07-05T19:11:02 Dropping old table...
2017-07-05T19:11:03 Dropped old table `test`.`_UC_USER_old` OK.
2017-07-05T19:11:03 Dropping triggers...
2017-07-05T19:11:03 Dropped triggers OK.
Successfully altered `test`.`UC_USER`.
real 2m17.788s
user 0m0.839s
sys 0m0.122s
[root@hch_test_121_91 ~]#
执行命令：
time pt-online-schema-change –host=192.168.121.91 –port=3307 –user=tim –password=”timisgood” –alter=”change C_N C_N_01 varchar(128) default 11” –execute D=test,t=UC_USER –set-vars innodb_lock_wait_timeout=50 –no-check-replication-filters –no-check-alter
执行过程：
[root@hch_test_121_91 ~]# time pt-online-schema-change --host=192.168.121.91 --port=3307 --user=tim --password="timisgood" --alter="change C_N C_N_01 varchar(128) default 11" --execute D=test,t=UC_USER --set-vars innodb_lock_wait_timeout=50 --no-check-replication-filters --no-check-alter
No slaves found. See --recursion-method if host hch_test_121_91 has slaves.
Not checking slave lag because no slaves were found and --check-slave-lag was not specified.
Operation, tries, wait:
analyze_table, 10, 1
copy_rows, 10, 0.25
create_triggers, 10, 1
drop_triggers, 10, 1
swap_tables, 10, 1
update_foreign_keys, 10, 1
Altering `test`.`UC_USER`...
Renaming columns:
C_N to C_N_01
Creating new table...
Created new table test._UC_USER_new OK.
Altering new table...
Altered `test`.`_UC_USER_new` OK.
2017-07-05T19:15:03 Creating triggers...
2017-07-05T19:15:03 Created triggers OK.
2017-07-05T19:15:03 Copying approximately 1457112 rows...
Copying `test`.`UC_USER`: 20% 01:57 remain
Copying `test`.`UC_USER`: 40% 01:27 remain
Copying `test`.`UC_USER`: 60% 00:59 remain
Copying `test`.`UC_USER`: 79% 00:30 remain
Copying `test`.`UC_USER`: 98% 00:02 remain
2017-07-05T19:17:38 Copied rows OK.
2017-07-05T19:17:38 Analyzing new table...
2017-07-05T19:17:38 Swapping tables...
2017-07-05T19:17:38 Swapped original and new tables OK.
2017-07-05T19:17:38 Dropping old table...
2017-07-05T19:17:39 Dropped old table `test`.`_UC_USER_old` OK.
2017-07-05T19:17:39 Dropping triggers...
2017-07-05T19:17:39 Dropped triggers OK.
Successfully altered `test`.`UC_USER`.
real 2m36.045s
user 0m1.000s
sys 0m0.158s
[root@hch_test_121_91 ~]#
执行命令：
time pt-online-schema-change –host=192.168.121.91 –port=3307 –user=tim –password=”timisgood” –alter=”drop column C_N_01” –execute D=test,t=UC_USER –set-vars innodb_lock_wait_timeout=50 –no-check-replication-filters –no-check-alter
执行过程：
[root@rac1 bin]# ./pt-online-schema-change -uroot -pxxx --alter=‘drop column address ‘ --execute D=test,t=t_xxx_compensate
[root@hch_test_121_91 ~]# time pt-online-schema-change --host=192.168.121.91 --port=3307 --user=tim --password="timisgood" --alter="drop column C_N_01" --execute D=test,t=UC_USER --set-vars innodb_lock_wait_timeout=50 --no-check-replication-filters --no-check-alter
No slaves found. See --recursion-method if host hch_test_121_91 has slaves.
Not checking slave lag because no slaves were found and --check-slave-lag was not specified.
Operation, tries, wait:
analyze_table, 10, 1
copy_rows, 10, 0.25
create_triggers, 10, 1
drop_triggers, 10, 1
swap_tables, 10, 1
update_foreign_keys, 10, 1
Altering `test`.`UC_USER`...
Creating new table...
Created new table test._UC_USER_new OK.
Altering new table...
Altered `test`.`_UC_USER_new` OK.
2017-07-06T10:47:33 Creating triggers...
2017-07-06T10:47:33 Created triggers OK.
2017-07-06T10:47:33 Copying approximately 1403100 rows...
Copying `test`.`UC_USER`: 21% 01:47 remain
Copying `test`.`UC_USER`: 39% 01:31 remain
Copying `test`.`UC_USER`: 61% 00:56 remain
Copying `test`.`UC_USER`: 82% 00:26 remain
2017-07-06T10:50:13 Copied rows OK.
2017-07-06T10:50:13 Analyzing new table...
2017-07-06T10:50:13 Swapping tables...
2017-07-06T10:50:13 Swapped original and new tables OK.
2017-07-06T10:50:13 Dropping old table...
2017-07-06T10:50:14 Dropped old table `test`.`_UC_USER_old` OK.
2017-07-06T10:50:14 Dropping triggers...
2017-07-06T10:50:14 Dropped triggers OK.
Successfully altered `test`.`UC_USER`.
real 2m41.533s
user 0m1.013s
sys 0m0.196s
[root@hch_test_121_91 ~]#
执行命令：
time pt-online-schema-change –host=192.168.121.91 –port=3307 –user=tim –password=”timisgood” –alter=”add index IDX_MOBILE(MOBILE)” –execute D=test,t=UC_USER –set-vars innodb_lock_wait_timeout=50 –no-check-replication-filters –no-check-alter
执行过程：
[root@hch_test_121_91 ~]# time pt-online-schema-change --host=192.168.121.91 --port=3307 --user=tim --password="timisgood" --alter="add index IDX_MOBILE(MOBILE)" --execute D=test,t=UC_USER --set-vars innodb_lock_wait_timeout=50 --no-check-replication-filters --no-check-alter
No slaves found. See --recursion-method if host hch_test_121_91 has slaves.
Not checking slave lag because no slaves were found and --check-slave-lag was not specified.
Operation, tries, wait:
analyze_table, 10, 1
copy_rows, 10, 0.25
create_triggers, 10, 1
drop_triggers, 10, 1
swap_tables, 10, 1
update_foreign_keys, 10, 1
Altering `test`.`UC_USER`...
Creating new table...
Created new table test._UC_USER_new OK.
Altering new table...
Altered `test`.`_UC_USER_new` OK.
2017-07-06T10:52:51 Creating triggers...
2017-07-06T10:52:51 Created triggers OK.
2017-07-06T10:52:51 Copying approximately 1457112 rows...
Copying `test`.`UC_USER`: 20% 01:58 remain
Copying `test`.`UC_USER`: 37% 01:39 remain
Copying `test`.`UC_USER`: 54% 01:16 remain
Copying `test`.`UC_USER`: 71% 00:47 remain
Copying `test`.`UC_USER`: 87% 00:21 remain
2017-07-06T10:55:48 Copied rows OK.
2017-07-06T10:55:48 Analyzing new table...
2017-07-06T10:55:48 Swapping tables...
2017-07-06T10:55:48 Swapped original and new tables OK.
2017-07-06T10:55:48 Dropping old table...
2017-07-06T10:55:49 Dropped old table `test`.`_UC_USER_old` OK.
2017-07-06T10:55:49 Dropping triggers...
2017-07-06T10:55:49 Dropped triggers OK.
Successfully altered `test`.`UC_USER`.
real 2m58.237s
user 0m1.092s
sys 0m0.184s
[root@hch_test_121_91 ~]#
执行命令：
time pt-online-schema-change –host=192.168.121.91 –port=3307 –user=tim –password=”timisgood” –alter=”drop index IDX_MOBILE” –execute D=test,t=UC_USER –set-vars innodb_lock_wait_timeout=50 –no-check-replication-filters –no-check-alter
执行过程：
[root@rac1 bin]# ./pt-online-schema-change -uroot -pxxx --alter=‘DROP INDEX indx_test‘ --execute D=test,t=t_xxx_compensate
[root@hch_test_121_91 ~]# time pt-online-schema-change --host=192.168.121.91 --port=3307 --user=tim --password="timisgood" --alter="drop index IDX_MOBILE" --execute D=test,t=UC_USER --set-vars innodb_lock_wait_timeout=50 --no-check-replication-filters --no-check-alter
No slaves found. See --recursion-method if host hch_test_121_91 has slaves.
Not checking slave lag because no slaves were found and --check-slave-lag was not specified.
Operation, tries, wait:
analyze_table, 10, 1
copy_rows, 10, 0.25
create_triggers, 10, 1
drop_triggers, 10, 1
swap_tables, 10, 1
update_foreign_keys, 10, 1
Altering `test`.`UC_USER`...
Creating new table...
Created new table test._UC_USER_new OK.
Altering new table...
Altered `test`.`_UC_USER_new` OK.
2017-07-06T10:59:15 Creating triggers...
2017-07-06T10:59:15 Created triggers OK.
2017-07-06T10:59:15 Copying approximately 1457112 rows...
Copying `test`.`UC_USER`: 24% 01:30 remain
Copying `test`.`UC_USER`: 42% 01:20 remain
Copying `test`.`UC_USER`: 60% 00:58 remain
Copying `test`.`UC_USER`: 79% 00:31 remain
2017-07-06T11:01:46 Copied rows OK.
2017-07-06T11:01:46 Analyzing new table...
2017-07-06T11:01:46 Swapping tables...
2017-07-06T11:01:46 Swapped original and new tables OK.
2017-07-06T11:01:46 Dropping old table...
2017-07-06T11:01:47 Dropped old table `test`.`_UC_USER_old` OK.
2017-07-06T11:01:47 Dropping triggers...
2017-07-06T11:01:47 Dropped triggers OK.
Successfully altered `test`.`UC_USER`.
real 2m32.376s
user 0m0.944s
sys 0m0.169s
[root@hch_test_121_91 ~]#
在没有执行sql语句时，mysql在线修改表结构的时间与pt-online-schma-change的基本上相等，无大的差别；pt-online-schma-change方式会占用较多内存，负载也会略高
在mysql预热以后，在线修改表结构的时间，直接修改会比pt-online-schema-change方式略快
在线修改表结构的同时执行mysql语句，mysql直接修改的方式会先修改完表结构再执行sql语句，pt-online-schema-change方式会优先执行sql语句，再复制数据表，复制完毕后再把执行sql语句的结果更新到新表，因此，在时间上，直接修改表结构会比pt-online-schema-change方式，在实际用时上，直接修改会略快
参考文章：https://www.percona.com/doc/percona-toolkit/2.1/pt-online-schema-change.html
[root@hch_test_121_91 percona-toolkit-3.0.3]# time
pt-online-schema-change -uroot -p –alter=’add column C_N varchar(64)’
–execute D=test,t=UC_USER
Cannot connect to MySQL: install_driver(mysql) failed: Attempt to reload DBD/mysql.pm aborted.
Compilation failed in require at (eval 13) line 3.
at /usr/local/bin/pt-online-schema-change line 2296
real 0m0.336s
user 0m0.314s
sys 0m0.021s
[root@hch_test_121_91 percona-toolkit-3.0.3]#
解决办法是移走/usr/local/lib64/perl5的目录：
[root@hch_test_121_91 /]# find / -name perl5
/data/backup/perl5
/usr/local/lib64/perl5
/usr/lib64/perl5
/usr/share/swig/1.3.40/perl5
/usr/share/perl5
[root@hch_test_121_91 /]# mv /usr/local/lib64/perl5 /usr/local/lib64/perl5_bak
[root@hch_test_121_91 /]#
[root@hch_test_121_91 /]# time pt-online-schema-change --user=root --alter="add column C_N varchar(64)" --execute D=test,t=UC_USER
Error setting innodb_lock_wait_timeout: DBD::mysql::db do failed: Variable ‘innodb_lock_wait_timeout‘ is a read only variable [for Statement "SET SESSION innodb_lock_wait_timeout=1"]. The current value for innodb_lock_wait_timeout is 50. If the variable is read only (not dynamic), specify --set-vars innodb_lock_wait_timeout=50 to avoid this warning, else manually set the variable and restart MySQL.
Error setting innodb_lock_wait_timeout: DBD::mysql::db do failed: Variable ‘innodb_lock_wait_timeout‘ is a read only variable [for Statement "SET SESSION innodb_lock_wait_timeout=1"]. The current value for innodb_lock_wait_timeout is 50. If the variable is read only (not dynamic), specify --set-vars innodb_lock_wait_timeout=50 to avoid this warning, else manually set the variable and restart MySQL.
No slaves found. See --recursion-method if host hch_test_121_91 has slaves.
Not checking slave lag because no slaves were found and --check-slave-lag was not specified.
The original table `test`.`UC_USER` does not exist.
real 0m0.362s
user 0m0.321s
sys 0m0.033s
[root@hch_test_121_91 /]#
解决办法：添加--set-vars innodb_lock_wait_timeout=50 参数
问题：
[root@hch_test_121_91 /]# time pt-online-schema-change
–host=192.168.121.91 –port=3307 –user=root –alter=”add column C_N
varchar(64)” –execute D=test,t=UC_USER –set-vars
innodb_lock_wait_timeout=50 –no-check-replication-filters
Cannot connect to MySQL: DBI
connect(‘test;host=192.168.121.91;port=3307;mysql_read_default_group=client’,’root’,…)
failed: Access denied for user ‘root’@’192.168.121.91’ (using password:
NO) at /usr/local/bin/pt-online-schema-change line 2296
real 0m0.358s
user 0m0.312s
sys 0m0.039s
解决办法，用户密码不能为null值
[root@hch_test_121_91 /]# time pt-online-schema-change --host=192.168.121.91 --port=3307 --user=tim --password="timisgood" --alter="add column C_N varchar(64)" --execute D=test,t=UC_USER --set-vars innodb_lock_wait_timeout=50 --no-check-replication-filters
No slaves found. See --recursion-method if host hch_test_121_91 has slaves.
Not checking slave lag because no slaves were found and --check-slave-lag was not specified.
Operation, tries, wait:
analyze_table, 10, 1
copy_rows, 10, 0.25
create_triggers, 10, 1
drop_triggers, 10, 1
swap_tables, 10, 1
update_foreign_keys, 10, 1
Altering `test`.`UC_USER`...
Creating new table...
Created new table test._UC_USER_new OK.
Altering new table...
Altered `test`.`_UC_USER_new` OK.
2017-07-05T15:18:46 Creating triggers...
2017-07-05T15:18:46 Created triggers OK.
2017-07-05T15:18:46 Copying approximately 1381835 rows...
Copying `test`.`UC_USER`: 20% 01:56 remain
Copying `test`.`UC_USER`: 41% 01:23 remain
Copying `test`.`UC_USER`: 61% 00:56 remain
Copying `test`.`UC_USER`: 82% 00:24 remain
2017-07-05T15:21:22 Copied rows OK.
2017-07-05T15:21:22 Analyzing new table...
2017-07-05T15:21:22 Swapping tables...
2017-07-05T15:21:22 Swapped original and new tables OK.
2017-07-05T15:21:22 Dropping old table...
2017-07-05T15:21:23 Dropped old table `test`.`_UC_USER_old` OK.
2017-07-05T15:21:23 Dropping triggers...
2017-07-05T15:21:23 Dropped triggers OK.
Successfully altered `test`.`UC_USER`.
real 2m42.191s
user 0m0.978s
sys 0m0.156s
[root@hch_test_121_91 /]#
自己单独执行alter操作
mysql> alter table test.UC_USER add column C_N_2 varchar(64);
Query OK, 0 rows affected (2 min 8.03 sec)
Records: 0 Duplicates: 0 Warnings: 0
mysql>
再次执行操作，看是否能在线ddl
（1）添加字段操作
[root@hch_test_121_91 /]# time pt-online-schema-change --host=192.168.121.91 --port=3307 --user=tim --password="timisgood" --alter="add column C_N_3 varchar(64) not null default ‘sky‘" --execute D=test,t=UC_USER --set-vars innodb_lock_wait_timeout=50 --no-check-replication-filters
No slaves found. See --recursion-method if host hch_test_121_91 has slaves.
Not checking slave lag because no slaves were found and --check-slave-lag was not specified.
Operation, tries, wait:
analyze_table, 10, 1
copy_rows, 10, 0.25
create_triggers, 10, 1
drop_triggers, 10, 1
swap_tables, 10, 1
update_foreign_keys, 10, 1
Altering `test`.`UC_USER`...
Creating new table...
Created new table test._UC_USER_new OK.
Altering new table...
Altered `test`.`_UC_USER_new` OK.
2017-07-05T15:30:32 Creating triggers...
2017-07-05T15:30:32 Created triggers OK.
2017-07-05T15:30:32 Copying approximately 1425328 rows...
Copying `test`.`UC_USER`: 20% 01:59 remain
Copying `test`.`UC_USER`: 39% 01:31 remain
Copying `test`.`UC_USER`: 61% 00:57 remain
Copying `test`.`UC_USER`: 87% 00:16 remain
2017-07-05T15:32:49 Copied rows OK.
2017-07-05T15:32:49 Analyzing new table...
2017-07-05T15:32:49 Swapping tables...
2017-07-05T15:32:49 Swapped original and new tables OK.
2017-07-05T15:32:49 Dropping old table...
2017-07-05T15:32:49 Dropped old table `test`.`_UC_USER_old` OK.
2017-07-05T15:32:49 Dropping triggers...
2017-07-05T15:32:49 Dropped triggers OK.
Successfully altered `test`.`UC_USER`.
real 2m18.175s
user 0m0.758s
sys 0m0.136s
[root@hch_test_121_91 /]#
（2）同时进行update操作
mysql> update test.UC_USER set UPDATE_DATE=now(),NAME=concat(NAME,1) where ID=300;
Query OK, 1 row affected (0.01 sec)
Rows matched: 1 Changed: 1 Warnings: 0
mysql> select ID,UPDATE_DATE,NAME from test.UC_USER where ID=300;
+-----+---------------------+------------+
| ID | UPDATE_DATE | NAME |
+-----+---------------------+------------+
| 300 | 2017-07-05 15:33:05 | 刘崇武1|
+-----+---------------------+------------+
1 row in set (0.00 sec)
mysql>
mysql> select ID,UPDATE_DATE,NAME,C_N_3 from test.UC_USER where ID=300;
+-----+---------------------+------------+-------+
| ID | UPDATE_DATE | NAME | C_N_3 |
+-----+---------------------+------------+-------+
| 300 | 2017-07-05 15:33:05 | 刘崇武1| sky |
+-----+---------------------+------------+-------+
1 row in set (0.00 sec)
mysql>
总结：
（1）不适合跨网络操作，适合本地操作
（2）上千万记录表或者上百万记录含大字段的表，使用pt比直接alter慢很多。
（3）pt在业务高峰期不适合使用，在高并发情景下也不太适合使用。
DELIMITER $$
USE `test`$$
DROP TRIGGER /*!50032 IF EXISTS */ `pt_osc_test_UC_USER_del`$$
CREATE
/*!50017 DEFINER = ‘tim‘@‘192.168.%‘ */
TRIGGER `pt_osc_test_UC_USER_del` AFTER DELETE ON `UC_USER`
FOR EACH ROW DELETE IGNORE FROM `test`.`_UC_USER_new` WHERE `test`.`_UC_USER_new`.`id` <=> OLD.`id`;
$$
DELIMITER ;
-----------------------------------------------------------------------------------------------------------
DELIMITER $$
USE `test`$$
DROP TRIGGER /*!50032 IF EXISTS */ `pt_osc_test_UC_USER_upd`$$
CREATE
/*!50017 DEFINER = ‘tim‘@‘192.168.%‘ */
TRIGGER `pt_osc_test_UC_USER_upd` AFTER UPDATE ON `UC_USER`
FOR EACH ROW BEGIN DELETE IGNORE FROM `test`.`_UC_USER_new` WHERE !(OLD.`id` <=> NEW.`id`) AND `test`.`_UC_USER_new`.`id` <=> OLD.`id`;REPLACE INTO `test`.`_UC_USER_new` (`id`, `user_name`, `user_pwd`, `birthday`, `name`, `user_icon`, `sex`, `nickname`, `stat`, `user_mall`, `last_login_date`, `last_login_ip`, `src_open_user_id`, `email`, `mobile`, `is_del`, `is_email_confirmed`, `is_phone_confirmed`, `creater`, `create_date`, `update_date`, `pwd_intensity`, `mobile_tgc`, `mac`, `source`, `activate`, `activate_type`, `is_life`, `reserve_create_date`, `c_n_2`, `c_n_3`) VALUES (NEW.`id`, NEW.`user_name`, NEW.`user_pwd`, NEW.`birthday`, NEW.`name`, NEW.`user_icon`, NEW.`sex`, NEW.`nickname`, NEW.`stat`, NEW.`user_mall`, NEW.`last_login_date`, NEW.`last_login_ip`, NEW.`src_open_user_id`, NEW.`email`, NEW.`mobile`, NEW.`is_del`, NEW.`is_email_confirmed`, NEW.`is_phone_confirmed`, NEW.`creater`, NEW.`create_date`, NEW.`update_date`, NEW.`pwd_intensity`, NEW.`mobile_tgc`, NEW.`mac`, NEW.`source`, NEW.`activate`, NEW.`activate_type`, NEW.`is_life`, NEW.`reserve_create_date`, NEW.`c_n_2`, NEW.`c_n_3`);END;
$$
DELIMITER ;
-----------------------------------------------------------------------------------------------------------
DELIMITER $$
USE `test`$$
DROP TRIGGER /*!50032 IF EXISTS */ `pt_osc_test_UC_USER_ins`$$
CREATE
/*!50017 DEFINER = ‘tim‘@‘192.168.%‘ */
TRIGGER `pt_osc_test_UC_USER_ins` AFTER INSERT ON `UC_USER`
FOR EACH ROW REPLACE INTO `test`.`_UC_USER_new` (`id`, `user_name`, `user_pwd`, `birthday`, `name`, `user_icon`, `sex`, `nickname`, `stat`, `user_mall`, `last_login_date`, `last_login_ip`, `src_open_user_id`, `email`, `mobile`, `is_del`, `is_email_confirmed`, `is_phone_confirmed`, `creater`, `create_date`, `update_date`, `pwd_intensity`, `mobile_tgc`, `mac`, `source`, `activate`, `activate_type`, `is_life`, `reserve_create_date`, `c_n_2`, `c_n_3`) VALUES (NEW.`id`, NEW.`user_name`, NEW.`user_pwd`, NEW.`birthday`, NEW.`name`, NEW.`user_icon`, NEW.`sex`, NEW.`nickname`, NEW.`stat`, NEW.`user_mall`, NEW.`last_login_date`, NEW.`last_login_ip`, NEW.`src_open_user_id`, NEW.`email`, NEW.`mobile`, NEW.`is_del`, NEW.`is_email_confirmed`, NEW.`is_phone_confirmed`, NEW.`creater`, NEW.`create_date`, NEW.`update_date`, NEW.`pwd_intensity`, NEW.`mobile_tgc`, NEW.`mac`, NEW.`source`, NEW.`activate`, NEW.`activate_type`, NEW.`is_life`, NEW.`reserve_create_date`, NEW.`c_n_2`, NEW.`c_n_3`);
$$
DELIMITER ;
MySQL 大表在线DML神器--pt-online-schema-change
标签：bsp 常用操作 数据 sla 开源 mail wap triggers creating
原文地址：http://www.cnblogs.com/gongxiaojiu/p/7258956.html
