磁盘分区流程：
1.插入磁盘查看磁盘信息
2.使用fdisk分区管理工具分区
选择分区类型：扩展分区/主分区
选择第几个分区
分区起始位置
分区大小
分区类型
查看分区信息
保存
退出分区交互界面
3.格式化分区 设置分区的文件系统
4.挂载
命令： (下例的所有命令)
fdisk -l /dev/sdb
fdisk /dev/sdb
n--p--1--回车--+15G--l--t--83--p--w
mkdir /data
mkfs.ext4 /dev/sdb1
mount /dev/sdb1 /data
mount -a
mount
echo "/data /dev/sdb1 ext4 default 0 0" >>/etc/fstab
例：
1.查看加入磁盘的信息：
[root@localhost ~]# fdisk -l /dev/sdb Disk /dev/sdb: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000
2.使用fdisk磁盘管理工具进入交互界面进行分区：
[root@localhost ~]# fdisk /dev/sdb ##对dev/sdb磁盘作操作
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x281ead65.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won‘t be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated. It‘s strongly recommended to
switch off the mode (command ‘c‘) and change display units to
sectors (command ‘u‘).
Command (m for help): n ##输入n 新建分区
Command action
e extended
p primary partition (1-4)
p ##选择分区类型，e extended 扩展分区 p primary partition 主分区
Partition number (1-4): 1 ##输入第几个分区 1-4
First cylinder (1-2610, default 1): ##分区的起始位置，回车默认
Last cylinder, +cylinders or +size{K,M,G} (1-2610, default 2610): +15G ##输入分区的大小
Command (m for help): l ##列出分区的类型
0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris
1 FAT12 39 Plan 9 82 Linux swap / So c1 DRDOS/sec (FAT-
2 XENIX root 3c PartitionMagic 83 Linux c4 DRDOS/sec (FAT-
3 XENIX usr 40 Venix 80286 84 OS/2 hidden C: c6 DRDOS/sec (FAT-
4 FAT16 <32M 41 PPC PReP Boot 85 Linux extended c7 Syrinx
5 Extended 42 SFS 86 NTFS volume set da Non-FS data
6 FAT16 4d QNX4.x 87 NTFS volume set db CP/M / CTOS / .
7 HPFS/NTFS 4e QNX4.x 2nd part 88 Linux plaintext de Dell Utility
8 AIX 4f QNX4.x 3rd part 8e Linux LVM df BootIt
9 AIX bootable 50 OnTrack DM 93 Amoeba e1 DOS access
a OS/2 Boot Manag 51 OnTrack DM6 Aux 94 Amoeba BBT e3 DOS R/O
b W95 FAT32 52 CP/M 9f BSD/OS e4 SpeedStor
c W95 FAT32 (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi eb BeOS fs
e W95 FAT16 (LBA) 54 OnTrackDM6 a5 FreeBSD ee GPT
f W95 Ext‘d (LBA) 55 EZ-Drive a6 OpenBSD ef EFI (FAT-12/16/
10 OPUS 56 Golden Bow a7 NeXTSTEP f0 Linux/PA-RISC b
11 Hidden FAT12 5c Priam Edisk a8 Darwin UFS f1 SpeedStor
12 Compaq diagnost 61 SpeedStor a9 NetBSD f4 SpeedStor
14 Hidden FAT16 <3 63 GNU HURD or Sys ab Darwin boot f2 DOS secondary
16 Hidden FAT16 64 Novell Netware af HFS / HFS+ fb VMware VMFS
17 Hidden HPFS/NTF 65 Novell Netware b7 BSDI fs fc VMware VMKCORE
18 AST SmartSleep 70 DiskSecure Mult b8 BSDI swap fd Linux raid auto
1b Hidden W95 FAT3 75 PC/IX bb Boot Wizard hid fe LANstep
1c Hidden W95 FAT3 80 Old Minix be Solaris boot ff BBT
1e Hidden W95 FAT1
Command (m for help): t ##t 选择分区的类型
Selected partition 1
Hex code (type L to list codes): 83 ##83是linux默认的分区类型
Command (m for help): p ##显示出分完区的信息
Disk /dev/sdb: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x281ead65
Device Boot Start End Blocks Id System
/dev/sdb1 1 1959 15735636 83 Linux
Command (m for help): w ##保存退出交互界面
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.3.格式化分区：
mkfs.制定文件系统 /dev/分区名
[root@localhost ~]# mkfs.ext4 /dev/sdb1 mke2fs 1.41.12 (17-May-2010) 文件系统标签= 操作系统:Linux 块大小=4096 (log=2) 分块大小=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 983488 inodes, 3933909 blocks 196695 blocks (5.00%) reserved for the super user 第一个数据块=0 Maximum filesystem blocks=4030726144 121 block groups 32768 blocks per group, 32768 fragments per group 8128 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208 正在写入inode表: 完成 Creating journal (32768 blocks): 完成 Writing superblocks and filesystem accounting information: 完成 This filesystem will be automatically checked every 29 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
4.挂载：
将/dev/sdb1分区挂载到/data这个目录.
[root@localhost ~]# mkdir /data ##新建目录
[root@localhost ~]# mount /dev/sdb1 /data/ # 临时挂载,在系统重启后就失效了 [root@localhost ~]# ls /data/ lost+found
##查看挂载目录，目录下会生成一个文件lost+fount
##这个文件是用来存放损坏和修复的文件，比如说系统down了，或者突然断电了，会残生损坏的文件，里面如果有文件了，那你就要注意了，检查。
[root@localhost ~]# mount -a ##刷新挂载分区 [root@localhost ~]# mount ##查看分区信息，最后一行是我们刚挂载的信息 /dev/mapper/VolGroup-lv_root on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/sda1 on /boot type ext4 (rw) /dev/mapper/VolGroup-lv_home on /home type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) /dev/sdb1 on /data type ext4 (rw)
永久挂载，这个配置文件是存放磁盘挂载点的 每次开机都会加载这个文件，从而实现开机挂载
[root@localhost ~]# vi /etc/fstab
在最后一样加入：
/data /dev/sdb1 ext4 default 0 0
挂载的目录 分区 文件系统类型 挂载的权限 开机检测 备份
[root@localhost ~]# tail -l /etc/fstab # /dev/mapper/VolGroup-lv_root / ext4 defaults 1 1 UUID=d5b5318c-9872-4206-bb61-f0e7cbc3d05f /boot ext4 defaults 1 2 /dev/mapper/VolGroup-lv_home /home ext4 defaults 1 2 /dev/mapper/VolGroup-lv_swap swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /data/dev/sdb1ext4default0 0 [root@localhost ~]# tail -1 /etc/fstab /data/dev/sdb1ext4default0 0
本文出自 “向往技术的小白” 博客，请务必保留此出处http://lesliecheung.blog.51cto.com/12622169/1957016
原文地址：http://lesliecheung.blog.51cto.com/12622169/1957016
