这个只是笔记，防止丢失，没事见整理
在vmware安装目录 创建磁盘：
vmware-vdiskmanager.exe -c -s 1000Mb -a lsilogic -t 2 D:\VMWARE\racsharedisk\ocr.vmdk
vmware-vdiskmanager.exe -c -s 1000Mb -a lsilogic -t 2 D:\VMWARE\racsharedisk\ocr2.vmdk
vmware-vdiskmanager.exe -c -s 1000Mb -a lsilogic -t 2 D:\VMWARE\racsharedisk\votingdisk.vmdk
vmware-vdiskmanager.exe -c -s 20000Mb -a lsilogic -t 2 D:\VMWARE\racsharedisk\data2.vmdk
vmware-vdiskmanager.exe -c -s 10000Mb -a lsilogic -t 2 D:\VMWARE\racsharedisk\backup.vmdk
编辑rac1 rac2 的vmx文件 添加：
scsi1.present = "TRUE"
scsi1.virtualDev = "lsilogic"
scsi1.sharedBus = "virtual"
scsi2.present = "TRUE"
scsi2.virtualDev = "lsilogic1"
scsi2.sharedBus = "virtual"
scsi1:1.present = "TRUE"
scsi1:1.mode = "independent-persistent"
scsi1:1.filename = "D:\VMWARE\racsharedisk\ocr.vmdk"
scsi1:1.deviceType = "plainDisk"
scsi1:2.present = "TRUE"
scsi1:2.mode = "independent-persistent"
scsi1:2.filename = "D:\VMWARE\racsharedisk\votingdisk.vmdk"
scsi1:2.deviceType = "plainDisk"
scsi1:3.present = "TRUE"
scsi1:3.mode = "independent-persistent"
scsi1:3.filename = "D:\VMWARE\racsharedisk\data.vmdk"
scsi1:3.deviceType = "plainDisk"
scsi1:4.present = "TRUE"
scsi1:4.mode = "independent-persistent"
scsi1:4.filename = "D:\VMWARE\racsharedisk\backup.vmdk"
scsi1:4.deviceType = "plainDisk"
scsi1:5.present = "TRUE"
scsi1:5.mode = "independent-persistent"
scsi1:5.filename = "D:\VMWARE\racsharedisk\ocr2.vmdk"
scsi1:5.deviceType = "plainDisk"
scsi2:2.present = "TRUE"
scsi2:2.mode = "independent-persistent"
scsi2:2.filename = "D:\VMWARE\racsharedisk\data3.vmdk"
scsi2:2.deviceType = "plainDisk"
disk.locking = "false"
diskLib.dataCacheMaxSize = "0"
diskLib.dataCacheMaxReadAheadSize = "0"
diskLib.DataCacheMinReadAheadSize = "0"
diskLib.dataCachePageSize = "4096"
diskLib.maxUnsyncedWrites = "0"
创建用户和组：
/usr/sbin/groupadd -g 1000 oinstall
/usr/sbin/groupadd -g 1020 asmadmin
/usr/sbin/groupadd -g 1021 asmdba
/usr/sbin/groupadd -g 1022 asmoper
/usr/sbin/groupadd -g 1031 dba
/usr/sbin/groupadd -g 1032 oper
useradd -u 1100 -g oinstall -G asmadmin,asmdba,asmoper,oper,dba grid
useradd -u 1101 -g oinstall -G dba,asmdba,oper oracle
mkdir -p /u01/app/11.2.0/grid
mkdir -p /u01/app/grid
mkdir /u01/app/oracle
chown -R grid:oinstall /u01
chown oracle:oinstall /u01/app/oracle
chmod -R 775 /u01/
内核参数调整：
内核参数设置：
[root@rac1 ~]# vi /etc/sysctl.conf
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 68719476736
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
net.ipv4.tcp_wmem = 262144 262144 262144
net.ipv4.tcp_rmem = 4194304 4194304 4194304
配置oracle、grid用户的shell限制
[root@rac1 ~]# vi /etc/security/limits.conf
grid soft nproc 2047
grid hard nproc 16384
grid soft nofile 1024
grid hard nofile 65536
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
配置login
[root@rac1 ~]# vi /etc/pam.d/login
session required pam_limits.so
依赖软件：
安装需要的软件包
binutils-2.20.51.0.2-5.11.el6 (x86_64)
compat-libcap1-1.10-1 (x86_64)
compat-libstdc++-33-3.2.3-69.el6 (x86_64)
compat-libstdc++-33-3.2.3-69.el6.i686
gcc-4.4.4-13.el6 (x86_64)
gcc-c++-4.4.4-13.el6 (x86_64)
glibc-2.12-1.7.el6 (i686)
glibc-2.12-1.7.el6 (x86_64)
glibc-devel-2.12-1.7.el6 (x86_64)
glibc-devel-2.12-1.7.el6.i686
ksh
libgcc-4.4.4-13.el6 (i686)
libgcc-4.4.4-13.el6 (x86_64)
libstdc++-4.4.4-13.el6 (x86_64)
libstdc++-4.4.4-13.el6.i686
libstdc++-devel-4.4.4-13.el6 (x86_64)
libstdc++-devel-4.4.4-13.el6.i686
libaio-0.3.107-10.el6 (x86_64)
libaio-0.3.107-10.el6.i686
libaio-devel-0.3.107-10.el6 (x86_64)
libaio-devel-0.3.107-10.el6.i686
make-3.81-19.el6
sysstat-9.0.4-11.el6 (x86_64)
安装：
yum install gcc gcc-c++ libaio* glibc* glibc-devel* ksh libgcc* libstdc++* libstdc++-devel* make sysstat unixODBC* compat-libstdc++-33.x86_64 elfutils-libelf-devel glibc.i686 compat-libcap1 smartmontools unzip openssh* parted cvuqdisk -y
rpm -ivh --force --nodeps libaio-0.3.106-5.i386.rpm
rpm -ivh --force --nodeps libaio-devel-0.3.106-5.i386.rpm
rpm -ivh --force --nodeps pdksh-5.2.14-36.el5.i386.rpm
rpm -ivh --force --nodeps libstdc++-4.1.2-48.el5.i386.rpm
rpm -ivh --force --nodeps libgcc-4.1.2-48.el5.i386.rpm
rpm -ivh --force --nodeps unixODBC-devel-2.2.11-7.1.i386.rpm
rpm -ivh --force --nodeps compat-libstdc++-33-3.2.3-61.i386.rpm
rpm -ivh --force --nodeps unixODBC-2.2.11-7.1.i386.rpm
配置hosts文件：
192.168.20.220 rac1
192.168.166.220 rac1-priv
192.168.20.223 rac1-vip
192.168.20.221 rac2
192.168.166.221 rac2-priv
192.168.20.224 rac2-vip
192.168.20.222 scan-ip
Oracle_sid需要根据节点不同进行修改
[root@rac1 ~]# su - grid
[grid@rac1 ~]$ vi .bash_profile
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=+ASM1
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=/u01/app/11.2.0/grid
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
umask 022
##rac1:
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=+ASM1
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=/u01/app/11.2.0/grid
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
umask 022
##rac2:
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=+ASM2
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=/u01/app/11.2.0/grid
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
umask 022
需要注意的是ORACLE_UNQNAME是数据库名，创建数据库时指定多个节点是会创建多个实例，ORACLE_SID指的是数据库实例名
[root@rac1 ~]# su - oracle
[oracle@rac1 ~]$ vi .bash_profile
#rac1:
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=orcl1
export ORACLE_UNQNAME=orcl
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1
export TNS_ADMIN=$ORACLE_HOME/network/admin
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
##rac2:
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=orcl2
export ORACLE_UNQNAME=orcl
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1
export TNS_ADMIN=$ORACLE_HOME/network/admin
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
$ source .bash_profile使配置文件生效
配置 绕城rac1 rac2 中的 root grid oracle 直接相互无ssh访问
每一个用户目录下都要配置：
ssh-keygen -t rsa
ssh rac1 cat ~/.ssh/id_rsa.pub >> authorized_keys
ssh rac2 cat ~/.ssh/id_rsa.pub >> authorized_keys
scp authorized_keys rac2:~/.ssh/
ssh rac1 date
ssh rac2 date
ssh rac1-priv date
ssh rac2-priv date
##如果swap太小，swap调整方法：
通过此种方式进行swap 的扩展，首先要计算出block的数目。具体为根据需要扩展的swapfile的大小，以M为单位。block=swap分区大小*1024, 例如，需要扩展64M的swapfile，则：block=64*1024=65536.
然后做如下步骤：
dd if=/dev/zero of=/swapfile bs=1024 count=9216000
#mkswap /swapfile
#swapon /swapfile
#vi /etc/fstab
增加/swapf swap swap defaults 0 0
# cat /proc/swaps 或者# free –m //查看swap分区大小
# swapoff /swapf //关闭扩展的swap分区
共享磁盘配置：
rac1 和rac2配置共享磁盘 （esxi主机上面 2个总线都要选择共享才不会报错）：
rac2 需要重启才可以在 ll /dev/raw 下面看到磁盘
所以只需root.sh 的时候 如果报错找不到raw磁盘，需要重启rac2，所以在配置好共享磁盘之后，重启rac2
在rac1格式化之后，
cat /etc/udev/rules.d/60-raw.rules
# Enter raw device bindings here.
#
# An example would be:
# ACTION=="add", KERNEL=="sda", RUN+="/bin/raw /dev/raw/raw1 %N"
# to bind /dev/raw/raw1 to /dev/sda, or
# ACTION=="add", ENV{MAJOR}=="8", ENV{MINOR}=="1", RUN+="/bin/raw /dev/raw/raw2 %M %m"
# to bind /dev/raw/raw2 to the device with major 8, minor 1.
ACTION=="add",KERNEL=="/dev/sdb1",RUN+=‘/bin/raw /dev/raw/raw1 %N"
ACTION=="add",ENV{MAJOR}=="8",ENV{MINOR}=="17",RUN+="/bin/raw /dev/raw/raw1 %M %m"
ACTION=="add",KERNEL=="/dev/sdc1",RUN+=‘/bin/raw /dev/raw/raw2 %N"
ACTION=="add",ENV{MAJOR}=="8",ENV{MINOR}=="33",RUN+="/bin/raw /dev/raw/raw2 %M %m"
ACTION=="add",KERNEL=="/dev/sdd1",RUN+=‘/bin/raw /dev/raw/raw3 %N"
ACTION=="add",ENV{MAJOR}=="8",ENV{MINOR}=="49",RUN+="/bin/raw /dev/raw/raw3 %M %m"
ACTION=="add",KERNEL=="/dev/sde1",RUN+=‘/bin/raw /dev/raw/raw4 %N"
ACTION=="add",ENV{MAJOR}=="8",ENV{MINOR}=="65",RUN+="/bin/raw /dev/raw/raw4 %M %m"
ACTION=="add",KERNEL=="/dev/sdf1",RUN+=‘/bin/raw /dev/raw/raw5 %N"
ACTION=="add",ENV{MAJOR}=="8",ENV{MINOR}=="81",RUN+="/bin/raw /dev/raw/raw5 %M %m"
KERNEL=="raw[1-5]",OWNER="grid",GROUP="asmadmin",MODE="660"
注意ENV{MINOR} 的值相差16，增加的值也得相差16 要不然识别不出来
然后执行 start_udev
ll /dev/raw
rac2上要是没有 执行 partprobe
[root@rac2 ~]# sh /tmp/CVU_11.2.0.4.0_grid/runfixup.sh
Response file being used is :/tmp/CVU_11.2.0.4.0_grid/fixup.response
Enable file being used is :/tmp/CVU_11.2.0.4.0_grid/fixup.enable
Log file location: /tmp/CVU_11.2.0.4.0_grid/orarun.log
Installing Package /tmp/CVU_11.2.0.4.0_grid//cvuqdisk-1.0.9-1.rpm
Preparing... ########################################### [100%]
ls: 无法访问/usr/sbin/smartctl: 没有那个文件或目录
/usr/sbin/smartctl not found.
error: %pre(cvuqdisk-1.0.9-1.x86_64) scriptlet failed, exit status 1
error: install: %pre scriptlet failed (2), skipping cvuqdisk-1.0.9-1
yum install smartmontools
集群预检查 grid用户：
./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -fixup -verbose
乱码：
export LC_CTYPE=en_US.UTF-8
uid=1100(grid) gid=1000(oinstall) 组=1000(oinstall),1020(asmadmin),1021(asmdba),1022(asmoper),1031(dba),1032(oper)
uid=1100(grid) gid=1000(oinstall) 组=1000(oinstall),1020(asmadmin),1021(asmdba),1022(asmoper),1031(dba),1032(oper)
Creating trace directory
/u01/app/11.2.0/grid/bin/clscfg.bin: error while loading shared libraries: libcap.so.1: cannot open shared object file: No such file or directory
Failed to create keys in the OLR, rc = 127, 32512
OLR configuration failed
解决：
yum install compat-libcap1 -y
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2017-09-01 18:18:52: Parsing the host name
2017-09-01 18:18:52: Checking for super user privileges
2017-09-01 18:18:52: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Improper Oracle Clusterware configuration found on this host
Deconfigure the existing cluster configuration before starting
to configure a new Clusterware
run ‘/u01/app/11.2.0/grid/crs/install/rootcrs.pl -deconfig‘
to configure existing failed configuration and then rerun root.sh
解决：
删除之前的注册信息，重新注册
/u01/app/11.2.0/grid/crs/install
./roothas.pl -delete -force -verbose
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: 对设备不适当的 ioctl 操作
ohasd failed to start at /u01/app/11.2.0/grid/crs/install/rootcrs.pl line 443.
解决方法竟然是出现pa user cert的时候在另一个窗口不停的执行下面的命令，直到命令执行成功，真是变态啊。
##执行root.sh 的时候 出现 adding demo to inttab的时候 执行，要不然可能需要重现安装系统来安装rac
/bin/dd if=/var/tmp/.oracle/npohasd of=/dev/null bs=1024 count=1
错误：
ORA-12545: Connect failed because target host or object does not exist
解决：
经测试，其实只需要在客户端主机的/etc/hosts文件中，添加目标数据库的vip的解决信息便可以解决（测试数据库版本11G R2）
RAC维护
在工作上有时候忘记ASM磁盘组所对应的ASM磁盘和设备名，需要查看时可以在ASM实例中使用以下命令：
SQL> select name,path from v$asm_disk_stat;
1.查看服务状态
忽略gsd问题
[root@rac1 ~]# su - grid
[grid@rac1 ~]$ crs_stat -t
检查集群运行状态
[grid@rac1 ~]$ srvctl status database -d orcl
Instance orcl1 is running on node rac1
Instance orcl2 is running on node rac2
检查本地节点的CRS状态
[grid@rac1 ~]$ crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
检查集群的CRS状态
[grid@rac1 ~]$ crsctl check cluster
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
3.查看集群中节点配置信息
[grid@rac1 ~]$ olsnodes
rac1
rac2
[grid@rac1 ~]$ olsnodes -n
rac1 1
rac2 2
[grid@rac1 ~]$ olsnodes -n -i -s -t
rac1 1 rac1-vip Active Unpinned
rac2 2 rac2-vip Active Unpinned
4.查看集群件的表决磁盘信息
[grid@rac1 ~]$ crsctl query css votedisk
## STATE File Universal Id File Name Disk group
-- ----- ----------------- --------- ---------
1. ONLINE 496abcfc4e214fc9bf85cf755e0cc8e2 (/dev/raw/raw1) [OCR]
Located 1 voting disk(s).
5.查看集群SCAN VIP信息
[grid@rac1 ~]$ srvctl config scan
SCAN name: scan-ip, Network: 1/192.168.248.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /scan-ip/192.168.248.110
查看集群SCAN Listener信息
[grid@rac1 ~]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
6.启、停集群数据库
整个集群的数据库启停
进入grid用户
[grid@rac1 ~]$ srvctl stop database -d orcl
[grid@rac1 ~]$ srvctl start database -d orcl
关闭所有节点
进入root用户
关闭所有节点
[root@rac1 bin]# pwd
/u01/app/11.2.0/grid/bin
[root@rac1 bin]# ./crsctl stop crs
实际只关闭了当前结点
EM管理
oracle用户下执行
[oracle@rac1 ~]$ emctl status dbconsole
[oracle@rac1 ~]$ emctl start dbconsole
[oracle@rac1 ~]$ emctl stop dbconsole
本地sqlplus连接
windows中安装oracle客户端版
修改tsnames.ora
D:\develop\app\orcl\product\11.2.0\client_1\network\admin\tsnames.ora
添加
RAC_ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.248.110)(PORT = 1521))
)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)
)
这里的HOST写的是scan-ip
C:\Users\sxtcx>sqlplus sys/oracle@RAC_ORCL as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on 星期四 4月 14 14:37:30 2016
Copyright (c) 1982, 2010, Oracle. All rights reserved.
连接到:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
SQL> select instance_name, status from v$instance;
INSTANCE_NAME STATUS
-------------------------------- ------------------------
orcl1 OPEN
当开启第二个命令行窗口连接时，发现实例名为orcl2，可以看出，scan-ip的加入可以具有负载均衡的作用。
oracle环境变量引起的“connected to an idle instance”
解决查看oracle的环境变量
将ORACLE_SID 和 ORACLE_UNQNAME 都改成自己建立的实例（rac1 rac2）都要改
source 一下 就可以了
asm 增加磁盘：
grid 用户下：
sqlplus / as sysasm
alter diskgroup FRA add disk ‘/dev/raw/raw4‘ rebalance power 5;
集群关闭和开启：
oracle 11g RAC 启动和关闭和一些维护命令 2013-10-27 16:47:33
分类： Linux
启动和关闭是经常使用的操作，必须牢记，以下整理的文档：
集群名称 rac-cluster
集群数据库 RACDB
一 关闭rac
1，确认srvctl 和ps -ef|grep smon
[grid@rac1 ~]$ srvctl status database -d RACDB
实例 RACDB1 正在节点 rac1 上运行
实例 RACDB2 正在节点 rac2 上运行
[grid@rac1 ~]$ ps -ef|grep smon
oracle 3676 1 0 06:05 ? 00:00:02 ora_smon_RACDB1
grid 12840 1 0 01:54 ? 00:00:00 asm_smon_+ASM1
grid 27890 27621 0 07:52 pts/3 00:00:00 grep smon
2,将数据库关闭并再次确认
[grid@rac1 ~]$ srvctl stop database -d RACDB
[grid@rac1 ~]$ ps -ef|grep smon
3,使用root 帐号关闭ASM
[grid@rac1 ~]$ su -
口令：
[root@rac1 ~]# cd /home/grid
[root@rac1 grid]# sh .bash_profile
4，使用crs_stat 确认集群各项资源和服务运行状态
[root@rac1 bin]# /u01/app/11.2.0/grid/bin/crs_stat -t -v
5，使用crsctl 指令关闭集群
[root@rac1 bin]# /u01/app/11.2.0/grid/bin/crsctl stop cluster -all
6，使用crs_stat 确认集群各项资源和服务运行状态
[root@rac1 bin]# /u01/app/11.2.0/grid/bin/crs_stat -t -v
[root@rac2 ~]# /u01/app/11.2.0/grid/bin/crs_stat -t -v
CRS-0184: Cannot communicate with the CRS daemon.
说明顺利关闭
二 。RAC 开启
1，root 执行grid 下面的环境变量 (可以不执行直接到/u01/app/11.2.0/grid/bin/模式下)
2，[root@rac1 ~]# /u01/app/11.2.0/grid/bin/crsctl stop cluster -all
3，开启集群
[root@rac1 ~]# /u01/app/11.2.0/grid/bin/crsctl start cluster -all
检查状态
[root@rac2 ~]# /u01/app/11.2.0/grid/bin/crs_stat -t -v
4，使用srvcel 确认数据库状态
[root@rac1 ~]# /u01/app/11.2.0/grid/bin/srvctl status database -d RACDB
实例 RACDB1 没有在 rac1 节点上运行
实例 RACDB2 没有在 rac2 节点上运行
5，打开RAC
[root@rac1 ~]# /u01/app/11.2.0/grid/bin/srvctl start database -d RACDB
确认状态
[root@rac2 ~]# /u01/app/11.2.0/grid/bin/srvctl status database -d RACDB
实例 RACDB1 正在节点 rac1 上运行
实例 RACDB2 正在节点 rac2 上运行
6,打开OEM
[root@rac1 ~]# /u01/app/11.2.0/grid/bin/emctl start RACDB
参考资料：
http://www.linuxidc.com/Linux/2017-03/141543.htm
http://blog.csdn.net/seulk_q/article/details/42612393
http://www.cnblogs.com/abclife/p/5706807.html
http://blog.chinaunix.net/uid-22948773-id-3940857.html
http://gaoshan.blog.51cto.com/742525/317349/
参考资料：
http://www.linuxidc.com/Linux/2017-03/141543.htm
kmod-oracleasm-2.0.6.rh1-3.el6_5.x86_64)
本文出自 “nginx安装优化” 博客，转载请与作者联系！
oracle 11g rac 笔记（VMware 和esxi主机都可以使用）
原文地址：http://mrdeng.blog.51cto.com/3736360/1963349
