码迷,mamicode.com
首页 > 数据库 > 详细

动态拼接SQL语句

时间:2017-09-07 21:23:25      阅读:335      评论:0      收藏:0      [点我收藏+]

标签:update   测试   res   com   字符   查询   logs   变量   add   

1.参考官方文档
? if:字符判断
? choose (when, otherwise):分支选择
? trim (where, set):字符串截取;其中where标签封装查询条件,set标签封装修改条件
? foreach

2.if案例

1)在EmployeeMapper接口中添加一个方法:
//携带了哪个字段,查询条件就带上哪个字段的值
public List<Employee> getEmployeeByConditionIf(Employee employee);

2).如果要写下列的SQL语句,只要是不为空,就作为查询条件,如下所示,这样写实际上是有问题的,所以我们要写成动态SQL语句:
<select id="getEmployeeByConditionIf" resultType="com.neuedu.entity.Employee">
select *from tbl_employee where id = #{id} and user_name = #{userName} and email = #{email} and gender = #{gender}
</select>

3)用if标签改写为动态SQL,如下所示:

<select id="getEmployeeByConditionIf" resultType="com.neuedu.entity.Employee">
				select *from tbl_employee 
				where 
				 <!--
					test:判断表达式(OGNL)
					OGNL参照PPT或者官方文档。
						c:if test
					从参数中取值进行判断
					遇见特殊符号,应该去写转义字符:参考W3CSchool>>HTML>>ISO8859
					
				  -->
				  <if test="id != null">
					id = #{id}
				  </if>
				  <if test="userName != null && userName !=‘‘">
					and user_name = #{userName} 
				  </if>
				  <if test="email != null and email.trim() != """>
					and email = #{email}
				  </if>
				  <!-- ognl会进行字符串和数字的转换判断;"0"==0,"1"==1 -->
				  <if test="gender == 0 or gender == 1">
					and gender = #{gender} 
				  </if>
			</select>

   4).测试代码:

@Test
		public void testGetEmployee(){
			EmployeeMapper mapper = openSession.getMapper(EmployeeMapper.class);
			Employee employee = new Employee();
			employee.setId(1);
			employee.setUserName("张三丰");
			employee.setEmail("sunwukong@163.com");
			employee.setGender(1);
			 List<Employee> list = mapper.getEmployeeByConditionIf(employee);
			System.out.println(list);
		}

  

但是仔细来说,上面的sql语句是有问题的,当我们不给动态sql语句传递id值的时候,sql语句的拼装就会有问题!
解决办法:
       1>.给where后面加上1=1,以后的条件都可以使用and xxx了
       2>.mybatis可以使用where标签来将所有的查询条件包括在内。mybatis就会将where标签中拼装的sql,
         多出来的and或者or去掉!//需要注意:where标签只会去掉第一个多出来的and或者or
      3.>也就是说使用where标签有时候还是不能解决问题的,那怎么办呢?我们这里可以使用trim标签!

2.trim标签:可以自定义字符串的截取规则

<select id="getEmployeeByConditionIf" resultType="com.neuedu.entity.Employee">
				select *from tbl_employee
				<!-- 
					后面多出的and或者or where标签不能够解决
				   prefix="":前缀:trim标签体重是整个字符串拼串后的结果。
							 prefix给拼串后的整个字符串加一个前缀
				   prefixOverrides="":
							前缀覆盖:去掉整个字符串前面多余的字符
				   suffix="":后缀
					 suffix给拼串后的整个字符串加一个后缀
				   suffixOverrides="":
						 后缀覆盖:去掉整个字符串后面多余的字符
				 --> 
				<trim prefix="where" suffixOverrides="and">
				  <if test="id != null">
					id = #{id} and
				  </if>
				  <if test="userName != null && userName !=‘‘">
					user_name = #{userName} and  
				  </if>
				  <if test="email != null and email.trim() != """>
					email = #{email} and 
				  </if>
				  <!-- ognl会进行字符串和数字的转换判断;"0"==0,"1"==1 -->
				  <if test="gender==0 or gender==1">
				   gender = #{gender}
				  </if>		
				</trim>
			</select>

  3.choose标签:分支选择,类似于Java中的带了break的switch...case

     

choose (when, otherwise):如果带了id,就用id查,如果带了userName就用userName查,只会进入其中一个!

案例演示:
     1>.在EmployeeMapper接口中添加一个方法:
            public List<Employee> getEmployeeByConditionChoose(Employee employee);
        2>.sql映射文件

<!-- public List<Employee> getEmployeeByConditionChoose(Employee employee); -->
			<select id="getEmployeeByConditionChoose" resultType="com.neuedu.entity.Employee">
				select *from tbl_employee
				<where>
					<!-- 如果带了id,就用id查,如果带了userName就用userName查,只会进入其中一个! -->
					<choose>
						<when test="id != null">
							id = #{id}
						</when>
						<when test="userName != null">
							user_name like #{userName}
						</when>
						<when test="email != null">
						   email = #{email}
						</when>
						<otherwise>
							1=1
						</otherwise>
					</choose>
				</where>
			</select>

  

4.trim 中的set标签(where, set):字符串截取;其中where标签封装查询条件,set标签封装修改条件
set元素会动态前置set关键字,同时也会消除无关的逗号。

        1).在EmployeeMapper中添加一个更新的方法,如下所示:
              public void updateEmp(Employee employee);
         2)在sql映射文件中,填写相应的sql语句,如下所示【set标签可以将字段后面的逗号去掉】:

<update id="updateEmp">
			update tbl_employee 
			<set>
				<if test="userName != null">
					user_name = #{userName},
				</if>
				<if test="email != null">
					email = #{email},
				</if>
				<if test="gender != null">
					gender = #{gender},
				</if>
			</set>
			where id = #{id}
		</update>

  测试类代码为:

@Test
		public void testGetEmployee(){
			EmployeeMapper mapper = openSession.getMapper(EmployeeMapper.class);
			Employee employee = new Employee();
			employee.setId(1);
			employee.setUserName("哈哈");
			employee.setEmail("sunwukong@163.com");
			employee.setGender(1);
			mapper.updateEmp(employee);
		}
	
	//当然上面的set标签我们也可以使用trim标签来代替,如下所示:
			<update id="updateEmp">
				update tbl_employee 
				<trim prefix="set" suffixOverrides=",">
					<if test="userName != null">
						user_name = #{userName},
					</if>
					<if test="email != null">
						email = #{email},
					</if>
					<if test="gender != null">
						gender = #{gender},
					</if>
				</trim>
				where id = #{id}
			</update>

  5.foreach:遍历元素

动态SQL的另一个常用的操作是需要对一个集合进行遍历,通常在构建in条件语句的时候!
foreach元素允许指定一个集合,声明集合项和索引变量,并可以指定开闭匹配的字符串以及在迭代之间放置分隔符。

案例演示:
         1>.在EmployeeMapper接口中加入一个方法,如下所示:
            public List<Employee> getEmpsByConditionForeach(@Param("ids") List<Integer> ids);
         2>.在MyBatis的sql映射文件中写相应的代码:

<!-- public List<Employee> getEmpsByConditionForeach(List<Integer> ids); -->
			<select id="getEmpsByConditionForeach" resultType="com.neuedu.entity.Employee">
				select * from  tbl_employee where id in
				<!-- 
					collection:指定要遍历的集合
					item:将当前遍历出的元素赋值给指定的变量
					separator:每个元素之间的分隔符
					open:遍历出所有记过拼接一个开始的字符
					close:遍历出所有结果拼接一个结束的字符
				 -->
				<foreach collection="ids" open="(" close=")" separator="," item="id">
					#{id}
				</foreach>
			</select>

     3.>测试类代码为:

@Test
			public void testGetEmployee(){
				EmployeeMapper mapper = openSession.getMapper(EmployeeMapper.class);
				List<Integer> asList = Arrays.asList(1,2,3,4);
				List<Employee> emps = mapper.getEmpsByConditionForeach(asList);
				for (Employee employee : emps) {
					System.out.println(employee);
				}
			}

  

foreach标签还可以用于批量保存数据,如下所示:

1.在EmployeeMapper接口类中添加批量插入的方法:
public void addEmps(@Param("emps") List<Employee> emps);

2.在EmployeeMapper.xml的sql映射文件中添加响应的语句:

<!-- public void addEmps(@Param("emps") List<Employee> emps); -->
<!-- MySQL下批量保存:可以foreach遍历,mysql支持values(),(),()语法 -->
<insert id="addEmps">
INSERT INTO tbl_employee(user_name,gender,email,d_id) VALUES
<foreach collection="emps" item="emp" separator=",">
(#{emp.userName},#{emp.gender},#{emp.email},#{emp.depart.id})
</foreach>
</insert>
3.测试代码:
@Test
public void testGetEmployee(){
EmployeeMapper mapper = openSession.getMapper(EmployeeMapper.class);
List<Employee> emps = new ArrayList<Employee>();
emps.add(new Employee(0, 1, "allen", "allen@163.com", new Department(1)));
emps.add(new Employee(0, 0, "tom", "tom@163.com", new Department(2)));
emps.add(new Employee(0, 1, "mux", "mux@163.com", new Department(1)));
mapper.addEmps(emps);
}

动态拼接SQL语句

标签:update   测试   res   com   字符   查询   logs   变量   add   

原文地址:http://www.cnblogs.com/lc-java/p/7491693.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!