标签：drive software cts org -name 记录 linu share starting
Booting Process in Linux RHEL 7 | Linux RHEL 7启动过程
In this post, I will guide you booting process in linux RHEL 7, it is very important to know the linux booting process to troubleshoot and fix boot issues. Redhat 7 replaced the init process (/sbin/init) with systemd (/usr/lib/systemd/systemd), systemd provides considerably more control compared to the init process does, although still supporting existing init scripts.
在本文中，我将引导你了解Linux RHEL 7的启动过程。了解Linux的启动过程对排除故障和修复启动问题来说非常重要。RedHat 7使用systemd(/usr/lib/systemd/systemd)替换init进程(/sbin/init)。与传统的init进程相比，systemd提供了更多的启动控制，虽然它仍支持现有的init脚本。
Linux boot process step by step:
Linux的启动过程
1. BIOS (Perform POST) | BIOS (执行上电自检Power On Self Test)
2. MBR (loads GRUB2) | 加载GRUB2
3. GRUB2
4. KERNEL
5. SYSTEMD
RHEL 7 booting process:
RHEL 7启动过程
BIOS:
BIOS Full Form is Basic Input/Output System, It is a software which helps in booting process when the power is on, it executes the power on self test (POST) to identify, test and initialize system hardware components and its loads the MBR.
BIOS代表的是基本的输入输出系统，它是一个帮助开机的软件，当上电后，它执行开机自检(POST)来识别、测试和初始化系统硬件部件，加载主引导记录(MBR)。
Master boot record (MBR)
It is the information in the first sector (512 bytes) of any Linux booting disk drive that identifies where and how an operating system is situated. Out of 512 bytes Boot-loader contains in 446 bytes, next 64 bytes contains the partition table for the disk. Last 2 bytes is called Magic number, which is used for error detection. MBR detects the bootable device and loads the GRUB2 boot loader into memory and transfers control over to it.
XXXX
GRUB2 Bootloader:
GRUB stands for GRand Unified Boot-loader. In Redhat 7, GRUB 2 is the default boot loader program, GRUB boot loader was used in previous RHEL versions. Configuration file for GRUB2 is located at /boot/grub2/grub.cfg. GRUB2 do a search for vmlinuz kernel image file in the /boot and loads the vmlinuz kernel image file into memory and extract the items in the initramfs image file into tmpfs (temporary file system).
XXXX
initramfs: It will pre-load the block devices modules, for example: SCSI, IDE, so that the root file system, on which those modules normally reside, can then be accessed and mounted.
XXXX
KERNEL:
The initramfs is bound to the kernel and the kernel mounts this initramfs as part of a two-stage boot process.
Kernel starts the systemd process with a process ID of 1 (PID 1).
XXXX
SYSTEMD:
systemd is an init system used in boot process in linux RHEL 7 to bootstrap the user space and manage all processes subsequently. systemd brings the machine to the state based on the system target, performing system initialization tasks such as:
XXXX
I hope this article provides you the information about, Booting Process in Linux RHEL 7. Thank you for studying!!. Be Social and share it in social media,if you really feel worth sharing it.
XXXX
扩展阅读
[中英对照]Booting Process in Linux RHEL 7 | Linux RHEL 7启动过程
标签：drive software cts org -name 记录 linu share starting
原文地址：http://www.cnblogs.com/idorax/p/7793913.html
