码迷,mamicode.com
首页 > 系统相关 > 详细

linux下(fdisk,gdisk,parted)三种分区工具比较

时间:2017-12-02 17:45:54      阅读:6810      评论:0      收藏:0      [点我收藏+]

标签:exfat   tran   out   second   ogr   log   tput   工具   分区工具   

1 2种分区结构简介

MBR分区

  • 硬盘主引导记录MBR由4个部分组成
  • 主引导程序(偏移地址0000H--0088H),它负责从活动分区中装载,并运行系统引导程序。
  • 出错信息数据区,偏移地址0089H--00E1H为出错信息,00E2H--01BDH全为0字节。
  • 分区表(DPT,Disk Partition Table)含4个分区项,偏移地
  • 址01BEH--01FDH,每个分区表项长16个字节,共64字节为分区项1、分区项2、分区项3、分区项4
  • 结束标志字,偏移地址01FE--01FF的2个字节值为结束标志55AA

GPT分区

  • GPT:GUID(Globals Unique Identifiers) partitiontable 支持128个分区,使用64位,支持8Z(512Byte/block )64Z ( 4096Byte/block)
  • 使用128位UUID(Universally Unique Identifier) 表示磁盘和分区 GPT分区表自动备份在头和尾两份,并有CRC校验位
  • UEFI (统一扩展固件接口)硬件支持GPT,使操作系统启动

2 fdisk的使用

2.1 fdisk命令的基础

[root@centos7 mnt]$ dd if=/dev/fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xc0e6470d.

Command (m for help): m
Command action
   a   toggle a bootable flag                                   # 切换可启动标志
   b   edit bsd disklabel                           # 编辑磁盘标记
   c   toggle the dos compatibility flag               # 切换dos兼容标志
   d   delete a partition                        # 删除一个分区
   g   create a new empty GPT partition table                  # 创建一个空的GPT分区表
   G   create an IRIX (SGI) partition table                    # 创建一个IRIX分区表
   l   list known partition types                   # 列出已知的分区类型
   m   print this menu                          # 打印菜单                   
   n   add a new partition                                       # 添加一个分区
   o   create a new empty DOS partition table                    # 创建一个空的DOS分区表
   p   print the partition table                                 # 打印分区表
   q   quit without saving changes                               # 退出不保存
   s   create a new empty Sun disklabel                          # 创建一个空的sun磁盘标签
   t   change a partitions system id                            # 改变一个分区的类型
   u   change display/entry units                                # 改变显示的单位
   v   verify the partition table                                # 验证分区表
   w   write table to disk and exit                              # 写分区表并退出
   x   extra functionality (experts only)                        # 高级功能

Command (m for help): 

2.2 fdisk实战

例子: 使用fdisk工具给/dev/sdb(100G)分区满足下面几个要求

  • 3个主分区一个扩展分区
  • /dev/sdb1分区类型为Linux LVM,大小为30G
  • /dev/sdb2分区类型为swap,大小为20G
  • /dev/sdb3分区类型为Linux, 大小为10G
  • /dev/sdb5分区类型为linux,大小为10G
  • 保留40G留作后用
技术分享图片
[root@centos7 mnt]$ fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x2fd8d812.

Command (m for help): n
Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p): p
Partition number (1-4, default 1): 
First sector (2048-209715199, default 2048): 
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-209715199, default 209715199): +30G
Partition 1 of type Linux and of size 30 GiB is set

Command (m for help): n
Partition type:
   p   primary (1 primary, 0 extended, 3 free)
   e   extended
Select (default p): p
Partition number (2-4, default 2): 
First sector (62916608-209715199, default 62916608): 
Using default value 62916608
Last sector, +sectors or +size{K,M,G} (62916608-209715199, default 209715199): +20G
Partition 2 of type Linux and of size 20 GiB is set

Command (m for help): n
Partition type:
   p   primary (2 primary, 0 extended, 2 free)
   e   extended
Select (default p): p
Partition number (3,4, default 3): 
First sector (104859648-209715199, default 104859648): 
Using default value 104859648
Last sector, +sectors or +size{K,M,G} (104859648-209715199, default 209715199): +10G
Partition 3 of type Linux and of size 10 GiB is set

Command (m for help): n
Partition type:
   p   primary (3 primary, 0 extended, 1 free)
   e   extended
Select (default e): e
Selected partition 4
First sector (125831168-209715199, default 125831168): 
Using default value 125831168
Last sector, +sectors or +size{K,M,G} (125831168-209715199, default 209715199): 
Using default value 209715199
Partition 4 of type Extended and of size 40 GiB is set

Command (m for help): n
All primary partitions are in use
Adding logical partition 5
First sector (125833216-209715199, default 125833216): 
Using default value 125833216
Last sector, +sectors or +size{K,M,G} (125833216-209715199, default 209715199): +10G
Partition 5 of type Linux and of size 10 GiB is set

Command (m for help): p

Disk /dev/sdb: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x2fd8d812

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048    62916607    31457280   83  Linux
/dev/sdb2        62916608   104859647    20971520   83  Linux
/dev/sdb3       104859648   125831167    10485760   83  Linux
/dev/sdb4       125831168   209715199    41942016    5  Extended
/dev/sdb5       125833216   146804735    10485760   83  Linux

Command (m for help): t
Partition number (1-5, default 5): 1
Hex code (type L to list all codes): L  

 0  Empty           24  NEC DOS         81  Minix / old Lin bf  Solaris        
 1  FAT12           27  Hidden NTFS Win 82  Linux swap / So c1  DRDOS/sec (FAT-
 2  XENIX root      39  Plan 9          83  Linux           c4  DRDOS/sec (FAT-
 3  XENIX usr       3c  PartitionMagic  84  OS/2 hidden C:  c6  DRDOS/sec (FAT-
 4  FAT16 <32M      40  Venix 80286     85  Linux extended  c7  Syrinx         
 5  Extended        41  PPC PReP Boot   86  NTFS volume set da  Non-FS data    
 6  FAT16           42  SFS             87  NTFS volume set db  CP/M / CTOS / .
 7  HPFS/NTFS/exFAT 4d  QNX4.x          88  Linux plaintext de  Dell Utility   
 8  AIX             4e  QNX4.x 2nd part 8e  Linux LVM       df  BootIt         
 9  AIX bootable    4f  QNX4.x 3rd part 93  Amoeba          e1  DOS access     
 a  OS/2 Boot Manag 50  OnTrack DM      94  Amoeba BBT      e3  DOS R/O        
 b  W95 FAT32       51  OnTrack DM6 Aux 9f  BSD/OS          e4  SpeedStor      
 c  W95 FAT32 (LBA) 52  CP/M            a0  IBM Thinkpad hi eb  BeOS fs        
 e  W95 FAT16 (LBA) 53  OnTrack DM6 Aux a5  FreeBSD         ee  GPT            
 f  W95 Extd (LBA) 54  OnTrackDM6      a6  OpenBSD         ef  EFI (FAT-12/16/
10  OPUS            55  EZ-Drive        a7  NeXTSTEP        f0  Linux/PA-RISC b
11  Hidden FAT12    56  Golden Bow      a8  Darwin UFS      f1  SpeedStor      
12  Compaq diagnost 5c  Priam Edisk     a9  NetBSD          f4  SpeedStor      
14  Hidden FAT16 <3 61  SpeedStor       ab  Darwin boot     f2  DOS secondary  
16  Hidden FAT16    63  GNU HURD or Sys af  HFS / HFS+      fb  VMware VMFS    
17  Hidden HPFS/NTF 64  Novell Netware  b7  BSDI fs         fc  VMware VMKCORE 
18  AST SmartSleep  65  Novell Netware  b8  BSDI swap       fd  Linux raid auto
1b  Hidden W95 FAT3 70  DiskSecure Mult bb  Boot Wizard hid fe  LANstep        
1c  Hidden W95 FAT3 75  PC/IX           be  Solaris boot    ff  BBT            
1e  Hidden W95 FAT1 80  Old Minix      
Hex code (type L to list all codes): 8e
Changed type of partition Linux to Linux LVM

Command (m for help): t
Partition number (1-5, default 5): 2
Hex code (type L to list all codes): 82
Changed type of partition Linux to Linux swap / Solaris

Command (m for help): p

Disk /dev/sdb: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x2fd8d812

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048    62916607    31457280   8e  Linux LVM
/dev/sdb2        62916608   104859647    20971520   82  Linux swap / Solaris
/dev/sdb3       104859648   125831167    10485760   83  Linux
/dev/sdb4       125831168   209715199    41942016    5  Extended
/dev/sdb5       125833216   146804735    10485760   83  Linux
Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
View Code

3 gdisk的使用

3.1 gdisk的命令基础

[root@centos7 mnt]$ gdisk /dev/sdb
GPT fdisk (gdisk) version 0.8.6

Partition table scan:
  MBR: MBR only
  BSD: not present
  APM: not present
  GPT: not present


***************************************************************
Found invalid GPT and valid MBR; converting MBR to GPT format.
THIS OPERATION IS POTENTIALLY DESTRUCTIVE! Exit by typing q if
you dont want to convert your MBR partitions to GPT format!
***************************************************************


Command (? for help): ?
b    back up GPT data to a file                                # 备份一个gpt数据到文件
c    change a partitions name                                 # 改变分区名
d    delete a partition                                        # 删除一个分区
i    show detailed information on a partition                  # 显示一个分区的详细信息
l    list known partition types                                # 列出已知的分区类型
n    add a new partition                                       # 添加一个新的分区
o    create a new empty GUID partition table (GPT)             # 创建一个空的GUID分区表
p    print the partition table                                 # 打印分区表
q    quit without saving changes                               # 退出不保存
r    recovery and transformation options (experts only)        # 专家模式
s    sort partitions                                           # 排序分区
t    change a partitions type code                            # 改变分区类型
v    verify disk                                               # 验证磁盘
w    write table to disk and exit                              # 写磁盘并退出
x    extra functionality (experts only)                        # 额外功能(专家模式)
?    print this menu                                           # 打印菜单

Command (? for help): 

 

3.2gdisk实战

例子: 使用gdisk工具给/dev/sdb(100G)分区满足下面几个要求

  • GPT分区
  • /dev/sdb1分区类型为Linux LVM,大小为30G
  • /dev/sdb2分区类型为swap,大小为20G
  • /dev/sdb3分区类型为Linux, 大小为10G
  • /dev/sdb4分区类型为linux,大小为10G
  • 保留40G留作后用

 上面我们对/dev/sdb已经分区了, 使用如下命令清空

[root@centos7 mnt]$ dd if=/dev/zero of=/dev/sdb bs=1 count=512                      #清空分区的前512字节,分区表被清空,小心操作
技术分享图片
[root@centos7 mnt]$ gdisk /dev/sdb
GPT fdisk (gdisk) version 0.8.6

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.

Command (? for help): p
Disk /dev/sdb: 209715200 sectors, 100.0 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 04F07BAC-C3A6-44BC-8D27-90A198C1C3B2
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 209715166
Partitions will be aligned on 2048-sector boundaries
Total free space is 209715133 sectors (100.0 GiB)

Number  Start (sector)    End (sector)  Size       Code  Name

Command (? for help): n
Partition number (1-128, default 1): 
First sector (34-209715166, default = 2048) or {+-}size{KMGTP}: 
Last sector (2048-209715166, default = 209715166) or {+-}size{KMGTP}: +30G
Current type is Linux filesystem
Hex code or GUID (L to show codes, Enter = 8300): L
0700 Microsoft basic data  0c01 Microsoft reserved    2700 Windows RE          
4200 Windows LDM data      4201 Windows LDM metadata  7501 IBM GPFS            
7f00 ChromeOS kernel       7f01 ChromeOS root         7f02 ChromeOS reserved   
8200 Linux swap            8300 Linux filesystem      8301 Linux reserved      
8e00 Linux LVM             a500 FreeBSD disklabel     a501 FreeBSD boot        
a502 FreeBSD swap          a503 FreeBSD UFS           a504 FreeBSD ZFS         
a505 FreeBSD Vinum/RAID    a580 Midnight BSD data     a581 Midnight BSD boot   
a582 Midnight BSD swap     a583 Midnight BSD UFS      a584 Midnight BSD ZFS    
a585 Midnight BSD Vinum    a800 Apple UFS             a901 NetBSD swap         
a902 NetBSD FFS            a903 NetBSD LFS            a904 NetBSD concatenated 
a905 NetBSD encrypted      a906 NetBSD RAID           ab00 Apple boot          
af00 Apple HFS/HFS+        af01 Apple RAID            af02 Apple RAID offline  
af03 Apple label           af04 AppleTV recovery      af05 Apple Core Storage  
be00 Solaris boot          bf00 Solaris root          bf01 Solaris /usr & Mac Z
bf02 Solaris swap          bf03 Solaris backup        bf04 Solaris /var        
bf05 Solaris /home         bf06 Solaris alternate se  bf07 Solaris Reserved 1  
bf08 Solaris Reserved 2    bf09 Solaris Reserved 3    bf0a Solaris Reserved 4  
bf0b Solaris Reserved 5    c001 HP-UX data            c002 HP-UX service       
ed00 Sony system partitio  ef00 EFI System            ef01 MBR partition scheme
ef02 BIOS boot partition   fb00 VMWare VMFS           fb01 VMWare reserved     
fc00 VMWare kcore crash p  fd00 Linux RAID            
Hex code or GUID (L to show codes, Enter = 8300): 8e00
Changed type of partition to Linux LVM

Command (? for help): n
Partition number (2-128, default 2): 
First sector (34-209715166, default = 62916608) or {+-}size{KMGTP}:  
Last sector (62916608-209715166, default = 209715166) or {+-}size{KMGTP}: +20G
Current type is Linux filesystem
Hex code or GUID (L to show codes, Enter = 8300): 8200
Changed type of partition to Linux swap

Command (? for help): n
Partition number (3-128, default 3): 
First sector (34-209715166, default = 104859648) or {+-}size{KMGTP}: 
Last sector (104859648-209715166, default = 209715166) or {+-}size{KMGTP}: +10G
Current type is Linux filesystem
Hex code or GUID (L to show codes, Enter = 8300): 
Changed type of partition to Linux filesystem

Command (? for help): n
Partition number (4-128, default 4): 
First sector (34-209715166, default = 125831168) or {+-}size{KMGTP}: 
Last sector (125831168-209715166, default = 209715166) or {+-}size{KMGTP}: +10G
Current type is Linux filesystem
Hex code or GUID (L to show codes, Enter = 8300): 
Changed type of partition to Linux filesystem

Command (? for help): p
Disk /dev/sdb: 209715200 sectors, 100.0 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 04F07BAC-C3A6-44BC-8D27-90A198C1C3B2
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 209715166
Partitions will be aligned on 2048-sector boundaries
Total free space is 62914493 sectors (30.0 GiB)

Number  Start (sector)    End (sector)  Size       Code  Name
   1            2048        62916607   30.0 GiB    8E00  Linux LVM
   2        62916608       104859647   20.0 GiB    8200  Linux swap
   3       104859648       125831167   10.0 GiB    8300  Linux filesystem
   4       125831168       146802687   10.0 GiB    8300  Linux filesystem

Command (? for help): w

Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!

Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/sdb.
The operation has completed successfully.
View Code

3 parted使用

3.1 parted命令基础

[root@centos7 mnt]$ parted --help
Usage: parted [OPTION]... [DEVICE [COMMAND [PARAMETERS]...]...]
Apply COMMANDs with PARAMETERS to DEVICE.  If no COMMAND(s) are given, run in
interactive mode.

OPTIONs:
  -h, --help                      displays this help message
  -l, --list                      lists partition layout on all block devices
  -m, --machine                   displays machine parseable output
  -s, --script                    never prompts for user intervention
  -v, --version                   displays the version
  -a, --align=[none|cyl|min|opt]  alignment for new partitions

COMMANDs:
  align-check TYPE N                        check partition N for TYPE(min|opt)
        alignment
  help [COMMAND]                           print general help, or help on
        COMMAND
  mklabel,mktable LABEL-TYPE               create a new disklabel (partitionM                       # 设置分区类型 详细使用man获取
        table)
  mkpart PART-TYPE [FS-TYPE] START END     make a partition                                         # 创建一个分区 start,end为M,详细信息使用man获取
  name NUMBER NAME                         name partition NUMBER as NAME
  print [devices|free|list,all|NUMBER]     display the partition table,                             # 打印信息
        available devices, free space, all found partitions, or a particular
        partition
  quit                                     exit program                                             # 退出
  rescue START END                         rescue a lost partition near START                       # 救援一个丢失的分区
        and END
  rm NUMBER                                delete partition NUMBER                                  # 删除一个分区
  select DEVICE                            choose the device to edit                                # 选择一个分区去编辑
  disk_set FLAG STATE                      change the FLAG on selected device                       # 改变选择分区的标记
  disk_toggle [FLAG]                       toggle the state of FLAG on selected                     # 切换选择分区的标记
        device
  set NUMBER FLAG STATE                    change the FLAG on partition NUMBER                      # 改变指定分区号的标记
  toggle [NUMBER [FLAG]]                   toggle the state of FLAG on partition                    # 切换指定分区号的标记
        NUMBER
  unit UNIT                                set the default unit to UNIT                             # 设置默认单位
  version                                  display the version number and                           # 显示版本
        copyright information of GNU Parted

Report bugs to bug-parted@gnu.org

3.2 parted实战

  • GPT分区
  • /dev/sdb1分区类型为Linux LVM,大小为30G
  • /dev/sdb2分区类型为swap,大小为20G
  • /dev/sdb3分区类型为Linux, 大小为10G
  • /dev/sdb4分区类型为linux,大小为10G
  • 保留40G留作后用
[root@centos7 mnt]$ parted -s /dev/sdb mklabel gpt 
[root@centos7 mnt]$ parted -s /dev/sdb unit GB mkpart primary 1 30 set 1 lvm on
[root@centos7 mnt]$ parted -s /dev/sdb unit GB mkpart primary 30 50 set 2 swap on
[root@centos7 mnt]$ parted -s /dev/sdb unit GB mkpart primary 50 60
[root@centos7 mnt]$ parted -s /dev/sdb unit GB mkpart primary 60 70
[root@centos7 mnt]$ parted -s /dev/sdb print

 4 三种分区的比较

  • fdisk只能用于MBR分区,gdisk,parted可以用于GPT分区。
  • fdisk大多数运维工作人员已经习惯这个交互模式。
  • parted命令在创建删除分区使用命令比较方便,但是功能不是太完善,没有备份还原命令。
  • gdisk在分区上命令和fdisk风格一样, 使用方便,学习难度低且功能强大,推荐使用。

 

linux下(fdisk,gdisk,parted)三种分区工具比较

标签:exfat   tran   out   second   ogr   log   tput   工具   分区工具   

原文地址:http://www.cnblogs.com/zhaojiedi1992/p/zhaojiedi_linux_039_fdisk_gdisk_parted.html

(0)
(2)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!