标签：服务器自动巡检 巡检脚本 shell脚本
#!/bin/sh
#定义检查操作系统版本的函数
NUM_VERSION=$(uname -r)
function Check_OS(){
[[ $NUM_VERSION =~ el6 ]] && return 0||return 1
}
echo "######CPU使用情况######"
CPU_HARDWARE=$(cat /proc/cpuinfo | grep name |cut -f2 -d: | uniq -c)
CPU_NUMBER=$(cat /proc/cpuinfo | grep name |cut -f2 -d: | uniq -c | awk '{print $1}')
CPU_LOAD=$(uptime | awk '{for(i=6;i<=NF;i++) printf $i""FS;print ""}')
CPU_LOAD_NUMBER=$(uptime | awk -F"load average:" '{print $2}' | awk -F"," '{print $1}' | awk -F"." '{print $1}' |sed 's/^[ \t]*//g')
CPU_UTILIZ=$(top -n 1 | grep "Cpu(s)")
if [[ $CPU_LOAD_NUMBER -lt $CPU_NUMBER ]]
then
CPU_STATUS=正常
else
CPU_STATUS=不正常
fi
echo "$CPU_STATUS("$CPU_HARDWARE,$CPU_LOAD,$CPU_UTILIZ")"
echo -e
echo -e
echo "######磁盘使用情况######"
IFS="
"
for i in `df -hP | sed 1d | awk '{print $(NF-1)"\t"$NF"\t"$(NF-2)}'`
do
DISK_UTILIZ=$(echo $i |awk '{print $1}')
MOUNT_DISK=$(echo $i |awk '{print $2}')
DISK_FREE=$(echo $i |awk '{print $3}')
if [[ $(echo $DISK_UTILIZ | sed s/%//g) -gt 70 ]]
then
echo "不正常""("$MOUNT_DISK"的使用率"$DISK_UTILIZ"较大,请注意"")"
else
continue
fi
done
echo -e
echo "磁盘具体使用情况:"
df -hP | sed 1d | awk '{print $NF"分区""剩余空间"$(NF-2),"使用率"$(NF-1)}'
UMAIL_DIR=$(cat /usr/local/u-mail/config/custom.conf | grep "mailroot" | awk -F"=" '{print $2}' | sed 's/^[ \t]*//g')
echo "邮件数据存储在"$UMAIL_DIR
echo -e
echo -e
echo "######内存使用情况######"
Check_OS
RESULT=$?
if [ ${RESULT} -eq 0 ]
then
MEM_SUM_NUM=$(free -m | grep "Mem:" | awk -F" " '{print $2}')
MEM_SURPLUS_NUM=$(free -m | grep "Mem:" | awk '{for(i=4;i<=NF;i++) print $i""FS;}' | awk '{a+=$1}END{print a}')
MEM_SUM=$(free -m | grep "Mem:" | awk -F" " '{print $2"M"}')
MEM_SURPLUS=$(free -m | grep "Mem:" | awk '{for(i=4;i<=NF;i++) print $i""FS;}' | awk '{a+=$1}END{print a"M"}')
MEM_USED=$(echo $(($MEM_SUM_NUM-$MEM_SURPLUS_NUM)))
PERCENT=$(printf "%d%%" $(($MEM_USED*100/$MEM_SUM_NUM)))
PERCENT_NUM=$(echo $PERCENT|sed s/%//g)
if [[ $PERCENT_NUM -lt 70 ]]
then
MEM_STATUS=正常
else
MEM_STATUS=不正常
fi
echo "$MEM_STATUS(""总内存大小"$MEM_SUM,"剩余内存大小"$MEM_SURPLUS,"内存使用率"$PERCENT")"
else
MEM_SUM_NUM7=$(free -m | grep "Mem:" | awk -F" " '{print $2}')
MEM_SURPLUS_NUM7=$(free -m | grep "Mem:" | awk -F" " '{print $4}')
MEM_SUM7=$(free -m | grep "Mem:" | awk -F" " '{print $2"M"}')
MEM_SURPLUS7=$(free -m | grep "Mem:" | awk -F" " '{print $4"M"}')
MEM_USED7=$(echo $(($MEM_SUM_NUM7-$MEM_SURPLUS_NUM7)))
PERCENT7=$(printf "%d%%" $(($MEM_USED7*100/$MEM_SUM_NUM7)))
PERCENT_NUM7=$(echo $PERCENT7|sed s/%//g)
if [[ $PERCENT_NUM7 -lt 70 ]]
then
MEM_STATUS=正常
else
MEM_STATUS=不正常
fi
echo "$MEM_STATUS(""总内存大小"$MEM_SUM7,"剩余内存大小"$MEM_SURPLUS7,"内存使用率"$PERCENT7")"
fi
echo -e
echo -e
echo "######操作系统版本和邮件系统版本######"
OS_VERSION=$(cat /etc/redhat-release)
UMAILAPP_VERSION=$(rpm -qa | grep umail_app | awk -F"." '{print $1"."$2"."$3}')
UMAILWEB_VERSION=$(rpm -qa | grep umail_webmail | awk -F"." '{print $1"."$2"."$3}')
echo $OS_VERSION,$UMAILAPP_VERSION,$UMAILWEB_VERSION
echo -e
echo -e
echo "######系统基本操作是否正常######"
SSH_SUM=$(cat /var/log/secure | grep "authentication failure" | wc -l)
SSH_DIY=500
if [ $SSH_SUM -gt $SSH_DIY ]
then
echo "有人在试您root密码，请注意"
else
echo "正常"
fi
echo -e
echo -e
echo "######是否有可疑进程或后门######"
echo "正常"
echo -e
echo -e
echo "######是否安装杀毒软件防火墙######"
Check_OS
RESULT=$?
if [ ${RESULT} -eq 0 ]
then
/etc/init.d/iptables status 1>/dev/null 2>&1
RESULT_IPTABLES=$?
if [ ${RESULT_IPTABLES} -eq 0 ]
then
echo "操作系统自带防火墙已开启"
else
echo "操作系统自带防火墙未开启"
fi
else
systemctl status firewalld.service 1>/dev/null 2>&1
RESULT_FIREWALLD=$?
if [ ${RESULT_FIREWALLD} -eq 0 ]
then
echo "操作系统自带防火墙已开启"
else
echo "操作系统自带防火墙未开启"
fi
fi
Check_OS
RESULT=$?
if [ ${RESULT} -eq 0 ]
then
ps -ef | grep umail_clamd | grep -v grep 1>/dev/null 2>&1
RESULT_CLAMD6=$?
/etc/init.d/umail_clamd status 1>/dev/null 2>&1
RESULT_CLAMDSTATUS6=$?
if [ ${RESULT_CLAMD6} -eq 0 ] && [ ${RESULT_CLAMDSTATUS6} -eq 0 ]
then
echo "已安装CLAMD杀毒软件"
else
echo "未安装杀毒软件或者未启动成功"
fi
else
ps -ef | grep umail_clamd | grep -v grep 1>/dev/null 2>&1
RESULT_CLAMD7=$?
systemctl status umail_clamd.service 1>/dev/null 2>&1
RESULT_CLAMDSTATUS7=$?
if [ ${RESULT_CLAMD7} -eq 0 ] && [ ${RESULT_CLAMDSTATUS7} -eq 0 ]
then
echo "已安装CLAMD杀毒软件"
else
echo "未安装杀毒软件或者未启动成功"
fi
fi
echo -e
echo -e
echo "######开机时长######"
LINETIME=$(uptime | awk -F"up" '{print $2}' | awk -F", load average" '{print $1}')
echo "服务器开机时间为"$LINETIME
echo -e
echo -e
echo "######HTTP服务######"
APACHE6_STATUS=$(/etc/init.d/umail_apache status 1>/dev/null 2>&1)
NGINX6_STATUS=$(/etc/init.d/umail_nginx status 1>/dev/null 2>&1)
APACHE7_STATUS=$(systemctl status umail_apache.service 1>/dev/null 2>&1)
NGINX7_STATUS=$(systemctl status umail_nginx.service 1>/dev/null 2>&1)
APACHE_PROC=$(ps -ef | grep "/usr/local/u-mail/service/apache/bin/httpd" | grep -v grep 1>/dev/null 2>&1)
NGINX_PROC=$(ps -ef | grep "/usr/local/u-mail/service/nginx/sbin/nginx" | grep -v grep 1>/dev/null 2>&1)
Check_OS
RESULT=$?
if [ ${RESULT} -eq 0 ]
then
/etc/init.d/umail_apache status 1>/dev/null 2>&1
RESULT_APACHE6=$?
/etc/init.d/umail_nginx status 1>/dev/null 2>&1
RESULT_NGINX6=$?
ps -ef | grep "/usr/local/u-mail/service/apache/bin/httpd" | grep -v grep 1>/dev/null 2>&1
RESULT_APACHEPROC6=$?
ps -ef | grep "/usr/local/u-mail/service/nginx/sbin/nginx" | grep -v grep 1>/dev/null 2>&1
RESULT_NGINXPROC6=$?
if [ ${RESULT_APACHE6} -eq 0 ] && [ ${RESULT_NGINX6} -eq 0 ] && [ ${RESULT_APACHEPROC6} -eq 0 ] && [ ${RESULT_NGINXPROC6} -eq 0 ]
then
echo "HTTP服务启动成功"
else
echo "HTTP服务启动不成功"
fi
else
systemctl status umail_apache.service 1>/dev/null 2>&1
RESULT_APACHE7=$?
systemctl status umail_nginx.service 1>/dev/null 2>&1
RESULT_NGINX7=$?
ps -ef | grep "/usr/local/u-mail/service/apache/bin/httpd" | grep -v grep 1>/dev/null 2>&1
RESULT_APACHEPROC7=$?
ps -ef | grep "/usr/local/u-mail/service/nginx/sbin/nginx" | grep -v grep 1>/dev/null 2>&1
RESULT_NGINXPROC7=$?
if [ ${RESULT_APACHE7} -eq 0 ] && [ ${RESULT_NGINX7} -eq 0 ] && [ ${RESULT_APACHEPROC7} -eq 0 ] && [ ${RESULT_NGINXPROC7} -eq 0 ]
then
echo "HTTP服务启动成功"
else
echo "HTTP服务启动不成功"
fi
fi
echo -e
echo -e
echo "######SMTP服务######"
Check_OS
RESULT=$?
if [ ${RESULT} -eq 0 ]
then
netstat -anltp | grep ":25" 1>/dev/null 2>&1
RESULT_SMTP=$?
/etc/init.d/umail_postfix status 1>/dev/null 2>&1
RESULT_POSTFIX=$?
if [ ${RESULT_SMTP} -eq 0 ] && [ ${RESULT_POSTFIX} -eq 0 ]
then
echo "SMTP服务启动成功"
else
echo "SMTP服务启动不成功"
fi
else
netstat -anltp | grep ":25" 1>/dev/null 2>&1
RESULT_SMTP7=$?
systemctl status umail_postfix.service 1>/dev/null 2>&1
RESULT_POSTFIX7=$?
if [ ${RESULT_SMTP7} -eq 0 ] && [ ${RESULT_POSTFIX7} -eq 0 ]
then
echo "SMTP服务启动成功"
else
echo "SMTP服务启动不成功"
fi
fi
echo -e
echo -e
echo "######POP服务######"
Check_OS
RESULT=$?
if [ ${RESULT} -eq 0 ]
then
netstat -anltp | grep ":110" 1>/dev/null 2>&1
RESULT_POP=$?
/etc/init.d/umail_dovecot status 1>/dev/null 2>&1
RESULT_POPPROC=$?
if [ ${RESULT_POP} -eq 0 ] && [ ${RESULT_POPPROC} -eq 0 ]
then
echo "POP服务启动成功"
else
echo "POP服务启动不成功"
fi
else
netstat -anltp | grep ":110" 1>/dev/null 2>&1
RESULT_POP7=$?
systemctl status umail_dovecot.service 1>/dev/null 2>&1
RESULT_POPPROC7=$?
if [ ${RESULT_POP7} -eq 0 ] && [ ${RESULT_POPPROC7} -eq 0 ]
then
echo "POP服务启动成功"
else
echo "POP服务启动不成功"
fi
fi
echo -e
echo -e
echo "######IMAP服务######"
Check_OS
RESULT=$?
if [ ${RESULT} -eq 0 ]
then
netstat -anltp | grep ":143" 1>/dev/null 2>&1
RESULT_IMAP=$?
/etc/init.d/umail_dovecot status 1>/dev/null 2>&1
RESULT_IMAPPROC=$?
if [ ${RESULT_IMAP} -eq 0 ] && [ ${RESULT_IMAPPROC} -eq 0 ]
then
echo "IMAP服务启动成功"
else
echo "IMAP服务启动不成功"
fi
else
netstat -anltp | grep ":143" 1>/dev/null 2>&1
RESULT_IMAP7=$?
systemctl status umail_dovecot.service 1>/dev/null 2>&1
RESULT_IMAPPROC7=$?
if [ ${RESULT_IMAP7} -eq 0 ] && [ ${RESULT_IMAPPROC7} -eq 0 ]
then
echo "IMAP服务启动成功"
else
echo "IMAP服务启动不成功"
fi
fi
echo -e
echo -e
echo "######收发测试(web和客户端)######"
echo "正常"
echo -e
echo -e
echo "######管理后台功能测试######"
echo "正常"
echo -e
echo -e
echo "######反垃圾反病毒测试######"
echo "正常"
echo -e
echo -e
echo "######是否有密码泄露导致群发垃圾邮件现象######"
SMTP_SUM=$(cat /usr/local/u-mail/app/log/smtp.log | grep "from:" | awk -F " " '{ print $6 }' | sed 's/<//g' | sed 's/>,//g' | sort | uniq -c | sort -rn |sed 's/^[ \t]*//g' |head -n 1 | awk -F" " '{print $1}')
SMTP_USER=$(cat /usr/local/u-mail/app/log/smtp.log | grep "from:" | awk -F " " '{ print $6 }' | sed 's/<//g' | sed 's/>,//g' | sort | uniq -c | sort -rn |sed 's/^[ \t]*//g' |head -n 1 | awk -F" " '{print $2}')
SMTP_DIY=500
if [ $SMTP_SUM -gt $SMTP_DIY ]
then
echo "当天外发邮件数量最大的"$SMTP_USER"用户超过"$SMTP_DIY"封，请确认"
else
echo "正常"
fi
echo -e
echo -e
运行结果如下：
[root@localhost ~]# sh check_umail.sh
######CPU使用情况######
正常( 2 Intel(R) Xeon(R) CPU E5606 @ 2.13GHz,1 user, load average: 0.06, 0.02, 0.00 ,Cpu(s): 2.1%us, 0.8%sy, 0.2%ni, 96.5%id, 0.3%wa, 0.0%hi, 0.2%si, 0.0%st)
######磁盘使用情况######
磁盘具体使用情况:
/分区剩余空间38G 使用率20%
/dev/shm分区剩余空间1.9G 使用率1%
/boot分区剩余空间425M 使用率7%
/home分区剩余空间434G 使用率38%
邮件数据存储在/home/mailbox
######内存使用情况######
正常(总内存大小3952M,剩余内存大小3028M,内存使用率23%)
######操作系统版本和邮件系统版本######
CentOS release 6.9 (Final),umail_app-2.2.44-2,umail_webmail-1.6.69-1
######系统基本操作是否正常######
正常
######是否有可疑进程或后门######
正常
######是否安装杀毒软件防火墙######
操作系统自带防火墙已开启
已安装CLAMD杀毒软件
######开机时长######
服务器开机时间为 33 days, 6:29, 1 user
######HTTP服务######
HTTP服务启动成功
######SMTP服务######
SMTP服务启动成功
######POP服务######
POP服务启动成功
######IMAP服务######
IMAP服务启动成功
######收发测试(web和客户端)######
正常
######管理后台功能测试######
正常
######反垃圾反病毒测试######
正常
######是否有密码泄露导致群发垃圾邮件现象######
正常
服务器自动巡检shell脚本
标签：服务器自动巡检 巡检脚本 shell脚本
原文地址：http://blog.51cto.com/net881004/2052702
