码迷,mamicode.com
首页 > 数据库 > 详细

使用EF操作Oracle数据库小计

时间:2018-01-09 20:14:18      阅读:244      评论:0      收藏:0      [点我收藏+]

标签:sse   protect   mapping   tps   not   pen   host   sqlserver   client   

1、建表

CREATE TABLE item.ORDERS(
   ORDERID NUMBER(20) CONSTRAINT PK_ORDERS PRIMARY KEY,
   ORDERNO VARCHAR2(20),
   STOREID NUMBER(20),
   STOREOWNERID NUMBER(20),
   CUSTOMERID NUMBER(20),
   ORDERTYPE NUMBER(3),
   ORDERSTATUS NUMBER(3)
   );

2、ID自增列设置

create sequence ITEM_ORDERS_SEQ  
minvalue 1    -- 最小值=1  
maxvalue 999999999999999999999999999  -- 指定最大值   
-- 或nomaxvalue      -- 没有最大值  
-- NOCYCLE;      -- 不循环  
start with 1   -- 从1开始  
increment by 1  -- 每次递增1  
cache 20;  
  
create or replace trigger ITEM_ORDERS_TRI
  before insert ON item.orders   --表名
  for each row
declare
  nextid number;
begin
  IF :new.ORDERID IS NULL or :new.ORDERID=0 THEN --ORDERID为列名
    select ITEM_ORDERS_SEQ.nextval
    into nextid
    from sys.dual;
    :new.ORDERID:=nextid;
  end if;
end ITEM_ORDERS_TRI;

3、nuget引用包(先删除已有的包,再按1、2、3次序依次引入)

技术分享图片

4、连接串配置

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <configSections>
    <section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
    <section name="oracle.manageddataaccess.client" type="OracleInternal.Common.ODPMSectionHandler, Oracle.ManagedDataAccess, Version=4.122.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342" />
    <!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
  </configSections>
  <entityFramework>
    <defaultConnectionFactory type="Oracle.ManagedDataAccess.EntityFramework.OracleConnectionFactory,Oracle.ManagedDataAccess.EntityFramework,Version=6.122.1.0,Culture=neutral,PublicKeyToken=89b483f429c47342" />
    <providers>
      <provider invariantName="Oracle.ManagedDataAccess.Client" type="Oracle.ManagedDataAccess.EntityFramework.EFOracleProviderServices, Oracle.ManagedDataAccess.EntityFramework, Version=6.122.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342" />
      <provider invariantName="System.Data.SqlClient" type="System.Data.Entity.SqlServer.SqlProviderServices, EntityFramework.SqlServer" />
    </providers>
  </entityFramework>
  <system.data>
    <DbProviderFactories>
      <remove invariant="Oracle.ManagedDataAccess.Client" />
      <add name="ODP.NET, Managed Driver" invariant="Oracle.ManagedDataAccess.Client" description="Oracle Data Provider for .NET, Managed Driver" type="Oracle.ManagedDataAccess.Client.OracleClientFactory, Oracle.ManagedDataAccess, Version=4.122.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342" />
    </DbProviderFactories>
  </system.data>
  <connectionStrings>
    <add name="OracleDbContext" providerName="Oracle.ManagedDataAccess.Client" connectionString="User Id=item;Password=yungou;Data Source=order_db" />
  </connectionStrings>
  <oracle.manageddataaccess.client>
    <version number="*">
      <dataSources>
        <dataSource alias="order_db" descriptor="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.2.96)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=orcl)))" />
      </dataSources>
      <edmMappings>
        <edmMapping dataType="number">
          <add name="bool" precision="1" />
          <add name="byte" precision="3" />
          <add name="int16" precision="5" />
          <add name="int32" precision="10" />
          <add name="int64" precision="19" />
        </edmMapping>
      </edmMappings>
    </version>
  </oracle.manageddataaccess.client>
  <runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <publisherPolicy apply="no" />
        <assemblyIdentity name="Oracle.ManagedDataAccess" publicKeyToken="89b483f429c47342" culture="neutral" />
        <bindingRedirect oldVersion="4.121.0.0 - 4.65535.65535.65535" newVersion="4.122.1.0" />
      </dependentAssembly>
    </assemblyBinding>
  </runtime>
</configuration>

5、映射管理

using System.Data.Entity;
using System.Data.Entity.ModelConfiguration.Conventions;

namespace EF.Oracle
{
    /// <summary>
    /// OracleDbContext
    /// </summary>
    public class OracleDbContext : DbContext
    {
        /// <summary>
        /// OracleDbContext
        /// </summary>
        public OracleDbContext()
            : base("OracleDbContext")
        {
            
        }

        public DbSet<Order> Orders { get; set; }

        /// <summary>
        /// OnModelCreating
        /// </summary>
        /// <param name="modelBuilder"></param>
        protected override void OnModelCreating(DbModelBuilder modelBuilder)
        {
            modelBuilder.HasDefaultSchema("ITEM");
            modelBuilder.Conventions.Remove<PluralizingTableNameConvention>();
            modelBuilder.Conventions.Remove<DatabaseGeneratedAttributeConvention>();

            modelBuilder.Entity<Order>().ToTable("ORDERS");
            //自增列需要在数据库建序列+触发器配合生成
            modelBuilder.Entity<Order>().HasKey(o => o.OrderId);
            modelBuilder.Entity<Order>().Property(o => o.OrderId).HasColumnName("ORDERID"); 
            modelBuilder.Entity<Order>().Property(o => o.OrderNo).HasColumnName("ORDERNO");
            modelBuilder.Entity<Order>().Property(o => o.StoreId).HasColumnName("STOREID");
            modelBuilder.Entity<Order>().Property(o => o.StoreOwnerId).HasColumnName("STOREOWNERID");
            modelBuilder.Entity<Order>().Property(o => o.CustomerId).HasColumnName("CUSTOMERID");
            modelBuilder.Entity<Order>().Property(o => o.OrderType).HasColumnName("ORDERTYPE");
            modelBuilder.Entity<Order>().Property(o => o.OrderStatus).HasColumnName("ORDERSTATUS");
        }
    }
}


/*
 * 自增列实现SQL
 * 
create sequence ITEM_ORDERS_SEQ  
minvalue 1    -- 最小值=1  
maxvalue 999999999999999999999999999  -- 指定最大值   
-- 或nomaxvalue      -- 没有最大值  
-- NOCYCLE;      -- 不循环  
start with 1   -- 从1开始  
increment by 1  -- 每次递增1  
cache 20;  
  
create or replace trigger ITEM_ORDERS_TRI
  before insert ON item.orders   --表名
  for each row
declare
  nextid number;
begin
  IF :new.ORDERID IS NULL or :new.ORDERID=0 THEN --ORDERID为列名
    select ITEM_ORDERS_SEQ.nextval
    into nextid
    from sys.dual;
    :new.ORDERID:=nextid;
  end if;
end ITEM_ORDERS_TRI;
*/

6、实体模型

using System;
using System.Collections.Generic;
using System.ComponentModel.DataAnnotations;
using System.ComponentModel.DataAnnotations.Schema;
using System.Linq;
using System.Text;
using System.Threading.Tasks;

namespace EF.Oracle
{
    public class Order
    {
        public long OrderId { get; set; }
        public string OrderNo { get; set; }

        public long StoreId { get; set; }

        /// <summary>
        /// 店主Id
        /// </summary>
        public long StoreOwnerId { get; set; }

        /// <summary>
        /// 买家Id
        /// </summary>
        public long CustomerId { get; set; }

        /// <summary>
        /// 订单类型
        /// </summary>
        public int OrderType { get; set; }

        /// <summary>
        /// 订单状态
        /// </summary>
        public int OrderStatus { get; set; }
    }
}

7、调用

using System;
using System.Data.Entity;
using System.Data.Entity.Core.Common.CommandTrees;
using System.Data.Entity.Core.Metadata.Edm;
using System.Linq;
using System.Text;

namespace EF.Oracle
{
    class Program
    {
        static OracleDbContext dbContext = new OracleDbContext();
        static void Main(string[] args)
        {
            dbContext.Database.Log = Console.WriteLine; //ef生成sql日志跟踪 https://www.cnblogs.com/huangxincheng/p/5911448.html
            var q = (from p in dbContext.Orders where p.OrderId > 1000
                select p).Any();
            Console.WriteLine(q.ToString());

            CreateOrder();
            QueryOrder();
            EditOrder();
            QueryOrder();
            Console.WriteLine("ok");
 
            Console.Write("Press any key to continue... ");
            Console.ReadLine();
        }

        private static void CreateOrder()
        {
            DeleteOrder();

            Order o = new Order
            {
                OrderNo = "777888999",
                CustomerId = 2222,
                OrderStatus = 10,
                OrderType = 10,
                StoreId = 24455,
                StoreOwnerId = 8888
            };

            dbContext.Orders.Add(o);
            dbContext.SaveChanges();
        }

        private static void EditOrder()
        {
            var order = dbContext.Orders.FirstOrDefault(o => o.OrderNo.Equals("777888999"));
            if (order != null)
            {
                order.CustomerId = 9999;
                order.OrderType = 20;

                dbContext.SaveChanges();
            }
        }

        private static void DeleteOrder()
        {
            var order = dbContext.Orders.FirstOrDefault(o => o.OrderNo.Equals("777888999"));
            if (order != null)
            {
                dbContext.Orders.Remove(order);
                dbContext.SaveChanges();
            }
        }

        private static void QueryOrder()
        {
            var order = dbContext.Orders.FirstOrDefault(o => o.OrderNo.Equals("777888999"));
            if (order != null)
            {
                Console.WriteLine(string.Format("{0}-{1}-{2}", order.OrderId, order.OrderNo, order.CustomerId));
            }
        }
    }
}

 8、输出

技术分享图片

使用EF操作Oracle数据库小计

标签:sse   protect   mapping   tps   not   pen   host   sqlserver   client   

原文地址:https://www.cnblogs.com/huangzelin/p/8252995.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!