LINUX下奇异的脚本重编写，解决脚本无法执行

标签：linux   脚本   

***********************************************声明********************************************** 

原创作品，出自 “深蓝的blog” 博客，欢迎转载，转载时请务必注明出处，否则追究版权法律责任。

表述有错误之处，请您留言或邮件（hyldba@163.com）指明，不胜感激。

本文转载必须保留此处：http://blog.csdn.net/huangyanlong/article/details/39357927

深蓝的blog：http://blog.csdn.net/huangyanlong

***************************************************************************************************

今天，在安装oracle数据库的过程中，在执行安装包脚本时，报出比较奇怪的错误现象，如下所示：

[root@hyl test]# sh rpm.sh
--单词释义
--ambiguous：模糊不清的
--redirect：直接的
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: command not found
: command not found
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: command not found
: command not found
: command not found 

于是，查看了执行的脚本，此脚本是在WIN平台下提前编写好的执行安装包的指令，如下所示：

[root@hyl test]# cat rpm.sh     
--查看有问题的脚本，没有发现异常编写
rpm -ivh binutils-2.17.50.0.6-14.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh binutils-devel-2.17.50.0.6-14.el5.i386.rpm >> rpm.log 2>&1 
rpm -ivh binutils-devel-2.17.50.0.6-14.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh compat-db-4.2.52-5.1.i386.rpm >> rpm.log 2>&1
rpm -ivh compat-db-4.2.52-5.1.x86_64.rpm >> rpm.log 2>&1
rpm -ivh control-center-2.16.0-16.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh control-center-2.16.0-16.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh control-center-devel-2.16.0-16.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh control-center-devel-2.16.0-16.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh gcc-4.1.2-50.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh gcc-c++-4.1.2-50.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-2.5-58.i686.rpm >> rpm.log 2>&1
rpm -ivh glibc-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-common-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-devel-2.5-58.i386.rpm >> rpm.log 2>&1
rpm -ivh glibc-devel-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-headers-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-utils-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libstdc++-devel-4.1.2-50.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libstdc++-devel-4.1.2-50.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libX11-1.0.3-11.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libX11-1.0.3-11.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libX11-devel-1.0.3-11.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libX11-devel-1.0.3-11.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXp-1.0.0-8.1.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libXp-1.0.0-8.1.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXp-devel-1.0.0-8.1.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libXp-devel-1.0.0-8.1.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXpm-3.5.5-3.i386.rpm >> rpm.log 2>&1
rpm -ivh libXpm-3.5.5-3.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXpm-devel-3.5.5-3.i386.rpm >> rpm.log 2>&1
rpm -ivh libXpm-devel-3.5.5-3.x86_64.rpm >> rpm.log 2>&1
rpm -ivh make-3.81-3.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh pdksh-5.2.14-36.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh sysstat-7.0.2-3.el5_5.1.x86_64.rpm >> rpm.log 2>&1

rm -rf binutils-2.17.50.0.6-14.el5.x86_64.rpm
rm -rf binutils-devel-2.17.50.0.6-14.el5.i386.rpm
rm -rf binutils-devel-2.17.50.0.6-14.el5.x86_64.rpm
rm -rf compat-db-4.2.52-5.1.i386.rpm
rm -rf compat-db-4.2.52-5.1.x86_64.rpm
rm -rf control-center-2.16.0-16.el5.i386.rpm
rm -rf control-center-2.16.0-16.el5.x86_64.rpm
rm -rf control-center-devel-2.16.0-16.el5.i386.rpm
rm -rf control-center-devel-2.16.0-16.el5.x86_64.rpm
rm -rf gcc-4.1.2-50.el5.x86_64.rpm
rm -rf gcc-c++-4.1.2-50.el5.x86_64.rpm
rm -rf glibc-2.5-58.i686.rpm
rm -rf glibc-2.5-58.x86_64.rpm
rm -rf glibc-common-2.5-58.x86_64.rpm
rm -rf glibc-devel-2.5-58.i386.rpm
rm -rf glibc-devel-2.5-58.x86_64.rpm
rm -rf glibc-headers-2.5-58.x86_64.rpm
rm -rf glibc-utils-2.5-58.x86_64.rpm
rm -rf libstdc++-devel-4.1.2-50.el5.i386.rpm
rm -rf libstdc++-devel-4.1.2-50.el5.x86_64.rpm
rm -rf libX11-1.0.3-11.el5.i386.rpm
rm -rf libX11-1.0.3-11.el5.x86_64.rpm
rm -rf libX11-devel-1.0.3-11.el5.i386.rpm
rm -rf libX11-devel-1.0.3-11.el5.x86_64.rpm
rm -rf libXp-1.0.0-8.1.el5.i386.rpm
rm -rf libXp-1.0.0-8.1.el5.x86_64.rpm
rm -rf libXp-devel-1.0.0-8.1.el5.i386.rpm
rm -rf libXp-devel-1.0.0-8.1.el5.x86_64.rpm
rm -rf libXpm-3.5.5-3.i386.rpm
rm -rf libXpm-3.5.5-3.x86_64.rpm
rm -rf libXpm-devel-3.5.5-3.i386.rpm
rm -rf libXpm-devel-3.5.5-3.x86_64.rpm
rm -rf make-3.81-3.el5.x86_64.rpm
rm -rf pdksh-5.2.14-36.el5.x86_64.rpm
rm -rf sysstat-7.0.2-3.el5_5.1.x86_64.rpm

rpm -qa|grep binutils >> queryrpm.log 2>&1
rpm -qa|grep compat >> queryrpm.log 2>&1
rpm -qa|grep control >> queryrpm.log 2>&1
rpm -qa|grep gcc >> queryrpm.log 2>&1
rpm -qa|grep glibc >> queryrpm.log 2>&1
rpm -qa|grep gnome >> queryrpm.log 2>&1
rpm -qa|grep libstdc++ >> queryrpm.log 2>&1
rpm -qa|grep make >> queryrpm.log 2>&1
rpm -qa|grep pdksh >> queryrpm.log 2>&1
rpm -qa|grep sysstat >> queryrpm.log 2>&1 

接下来采取的方法是，把该脚本中的内容在LINUX平台下重新拷贝到新建的文件中，如下所示：

[root@hyl test]# cat hyll.sh
--LINUX系统下，把rpm.sh中的指令复制了一遍到新的脚本文件hyll.sh中
--重新执行脚本内容如下，与之前rpm.sh脚本内容完全一样
rpm -ivh binutils-2.17.50.0.6-14.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh binutils-devel-2.17.50.0.6-14.el5.i386.rpm >> rpm.log 2>&1 
rpm -ivh binutils-devel-2.17.50.0.6-14.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh compat-db-4.2.52-5.1.i386.rpm >> rpm.log 2>&1
rpm -ivh compat-db-4.2.52-5.1.x86_64.rpm >> rpm.log 2>&1
rpm -ivh control-center-2.16.0-16.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh control-center-2.16.0-16.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh control-center-devel-2.16.0-16.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh control-center-devel-2.16.0-16.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh gcc-4.1.2-50.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh gcc-c++-4.1.2-50.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-2.5-58.i686.rpm >> rpm.log 2>&1
rpm -ivh glibc-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-common-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-devel-2.5-58.i386.rpm >> rpm.log 2>&1
rpm -ivh glibc-devel-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-headers-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-utils-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libstdc++-devel-4.1.2-50.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libstdc++-devel-4.1.2-50.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libX11-1.0.3-11.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libX11-1.0.3-11.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libX11-devel-1.0.3-11.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libX11-devel-1.0.3-11.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXp-1.0.0-8.1.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libXp-1.0.0-8.1.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXp-devel-1.0.0-8.1.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libXp-devel-1.0.0-8.1.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXpm-3.5.5-3.i386.rpm >> rpm.log 2>&1
rpm -ivh libXpm-3.5.5-3.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXpm-devel-3.5.5-3.i386.rpm >> rpm.log 2>&1
rpm -ivh libXpm-devel-3.5.5-3.x86_64.rpm >> rpm.log 2>&1
rpm -ivh make-3.81-3.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh pdksh-5.2.14-36.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh sysstat-7.0.2-3.el5_5.1.x86_64.rpm >> rpm.log 2>&1

rm -rf binutils-2.17.50.0.6-14.el5.x86_64.rpm
rm -rf binutils-devel-2.17.50.0.6-14.el5.i386.rpm
rm -rf binutils-devel-2.17.50.0.6-14.el5.x86_64.rpm
rm -rf compat-db-4.2.52-5.1.i386.rpm
rm -rf compat-db-4.2.52-5.1.x86_64.rpm
rm -rf control-center-2.16.0-16.el5.i386.rpm
rm -rf control-center-2.16.0-16.el5.x86_64.rpm
rm -rf control-center-devel-2.16.0-16.el5.i386.rpm
rm -rf control-center-devel-2.16.0-16.el5.x86_64.rpm
rm -rf gcc-4.1.2-50.el5.x86_64.rpm
rm -rf gcc-c++-4.1.2-50.el5.x86_64.rpm
rm -rf glibc-2.5-58.i686.rpm
rm -rf glibc-2.5-58.x86_64.rpm
rm -rf glibc-common-2.5-58.x86_64.rpm
rm -rf glibc-devel-2.5-58.i386.rpm
rm -rf glibc-devel-2.5-58.x86_64.rpm
rm -rf glibc-headers-2.5-58.x86_64.rpm
rm -rf glibc-utils-2.5-58.x86_64.rpm
rm -rf libstdc++-devel-4.1.2-50.el5.i386.rpm
rm -rf libstdc++-devel-4.1.2-50.el5.x86_64.rpm
rm -rf libX11-1.0.3-11.el5.i386.rpm
rm -rf libX11-1.0.3-11.el5.x86_64.rpm
rm -rf libX11-devel-1.0.3-11.el5.i386.rpm
rm -rf libX11-devel-1.0.3-11.el5.x86_64.rpm
rm -rf libXp-1.0.0-8.1.el5.i386.rpm
rm -rf libXp-1.0.0-8.1.el5.x86_64.rpm
rm -rf libXp-devel-1.0.0-8.1.el5.i386.rpm
rm -rf libXp-devel-1.0.0-8.1.el5.x86_64.rpm
rm -rf libXpm-3.5.5-3.i386.rpm
rm -rf libXpm-3.5.5-3.x86_64.rpm
rm -rf libXpm-devel-3.5.5-3.i386.rpm
rm -rf libXpm-devel-3.5.5-3.x86_64.rpm
rm -rf make-3.81-3.el5.x86_64.rpm
rm -rf pdksh-5.2.14-36.el5.x86_64.rpm
rm -rf sysstat-7.0.2-3.el5_5.1.x86_64.rpm

rpm -qa|grep binutils >> queryrpm.log 2>&1
rpm -qa|grep compat >> queryrpm.log 2>&1
rpm -qa|grep control >> queryrpm.log 2>&1
rpm -qa|grep gcc >> queryrpm.log 2>&1
rpm -qa|grep glibc >> queryrpm.log 2>&1
rpm -qa|grep gnome >> queryrpm.log 2>&1
rpm -qa|grep libstdc++ >> queryrpm.log 2>&1
rpm -qa|grep make >> queryrpm.log 2>&1
rpm -qa|grep pdksh >> queryrpm.log 2>&1
rpm -qa|grep sysstat >> queryrpm.log 2>&1
[root@hyl test]# sh  hyll.sh 

成功执行，对比前后两个脚本，书写内容上没有差异。

查看脚本权限，完全一样的两个脚本，hyll.sh可以正常执行，而rpm.sh却不能正常执行。

[root@hyl test]# ls -ll
total 24
-rw-r--r-- 1 root root 3855 Sep 17 15:23 hyll.sh
-rw-r--r-- 1 1 root root 3942 Sep 17 14:32 rpm.sh 

小结：

        今天遇到的问题感觉有点奇葩，几乎相同的两个脚本，一个可以执行，一个却不可以执行。后期又实验了一次，将脚本完全一样的复制了一次（脚本名称、内容），没做任何修改，就是把脚本重建了一次。重建后的脚本却可以执行了。想了下，唯一的区别就是无法执行的脚本实在WINDOWS上编写的，新的脚本实在LINUX上编写的。问题虽然解决，这个现象还是感觉非常奇怪。

        于是带着好奇，在网上搜了下“ambiguous redirect”的报错原因，发现很多有关于重定向符格式的问题。于是想了下，是否是重定向符号是需要在LINUX下编写才会正常执行（也就是说LINUX系统对某些特殊操作符比较敏感）。

         带着疑问，开始重新一次实验。大致思路如下：

         在LINUX下将不可执行脚本修改为可执行的脚本（就是在LINUX下重写贴一遍指令），导出到WINDOWS下，重新换LINUX平台，将导出的脚本文件重命名，上传到实验平台，验证脚本的可用性。经过验证后发现，通过LINUX平台编辑的脚本均可以正常执行，脚本无法执行是由于跨平台书写格式所导致的。在WINDOWS和LINUX系统下其中对换行等格式都是有细微差别的，因此，今天这个报错告诉我们，今后修改脚本要在LINUX系统下完成，完成后再导入到自己的存储设备中，以防万一。

***********************************************声明********************************************** 

原创作品，出自 “深蓝的blog” 博客，欢迎转载，转载时请务必注明出处，否则追究版权法律责任。

表述有错误之处，请您留言或邮件（hyldba@163.com）指明，不胜感激。

本文转载必须保留此处：http://blog.csdn.net/huangyanlong/article/details/39357927

深蓝的blog：http://blog.csdn.net/huangyanlong

***************************************************************************************************

LINUX下奇异的脚本重编写，解决脚本无法执行

标签：linux   脚本   

原文地址：http://blog.csdn.net/huangyanlong/article/details/39357927