MHA + proxysql 高可用以及读写分离

时间：2018-02-10 17:37:07 阅读：369 评论：0 收藏：0 [点我收藏+]

标签：percona kill either printf distrib warning invalid ring ==

环境

vip     192.168.1.101

slave   192.168.1.16  5.7.17 3306

master  192.168.1.135 5.7.17 3306

proxysql 192.168.1.16（为方便proxysql放在了16节点上)

一 MHA的搭建

1.安装MHA软件，首先安装epel源。（2台机器）

rpm -ivh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm

2.安装perl相关组件（2台机器）

yum install perl-DBD-MySQL

yum install perl-Config-Tiny

yum install perl-Log-Dispatch

yum install perl-Parallel-ForkManager

3.安装MHA软件 (两台机器建议都安装,切换方便)（2台机器）

rpm -ivh mha4mysql-node-0.56-0.el6.noarch.rpm

rpm -ivh mha4mysql-manager-0.56-0.el6.noarch.rpm

4.建立SSH信任关系

5.授权

GRANT ALL PRIVILEGES ON *.* TO ‘zhuch‘@‘%‘ IDENTIFIED BY  "zhuch"
GRANT REPLICATION SLAVE ON *.* TO ‘slave‘@‘%‘ IDENTIFIED BY  "oracle"

6.创建应用目录

mkdir /etc/masterha

拷贝如下文件到 /etc/masterha

[root@mysql3 masterha]# ls -l
total 32
-rw-r--r--. 1 root root   509 Feb 10 02:29 app1.conf
-rw-r--r--. 1 root root    55 Feb 10 03:15 drop_vip.sh
-rw-r--r--. 1 root root    57 Feb 10 03:15 init_vip.sh
-rw-r--r--. 1 root root   354 Feb 10 02:25 masterha_default.conf
-rwxr-xr-x. 1 root root  3978 Feb 10 03:16 master_ip_failover
-rwxr-xr-x. 1 root root 10390 Feb 10 03:17 master_ip_online_change

app1.conf MHA相关配置文件（在软件包解压后的目录里面有样例配置文件,只不过这里我们直接创建一个重新编辑）

[root@mysql3 masterha]# cat app1.conf
[server default]

#mha manager工作目录
manager_workdir = /var/log/masterha/app1
manager_log = /var/log/masterha/app1/app1.log
remote_workdir = /var/log/masterha/app1

[server1]
hostname=192.168.1.16
master_binlog_dir = /data/mysql/mysql3306/logs
candidate_master = 1
check_repl_delay = 0 #用防止master故障时，切换时slave有延迟，卡在那里切不过来。

[server3]
hostname=192.168.1.135
master_binlog_dir=/data/mysql/mysql3306/logs
candidate_master = 1
check_repl_delay = 0

drop_vip.sh 解除绑定vip

[root@mysql3 masterha]# cat drop_vip.sh 
vip="192.168.1.101/24"
/sbin/ip addr del $vip dev eth0

init._vip.sh 绑定vip

[root@mysql3 masterha]# cat init_vip.sh 
vip="192.168.1.101/24"
/sbin/ip addr add $vip dev eth0

masterha_default.conf 全局级配置文件

[root@mysql3 masterha]# cat masterha_default.conf
[server default]
#MySQL的用户和密码
user=zhuch
password=zhuch

#系统ssh用户
ssh_user=root

#复制用户
repl_user=slave
repl_password=oracle

#监控
ping_interval=1
#shutdown_script=""

#切换调用的脚本
master_ip_failover_script= /etc/masterha/master_ip_failover
master_ip_online_change_script= /etc/masterha/master_ip_online_change

master_ip_failover 自动failover脚本

[root@mysql3 masterha]# cat master_ip_failover 
#!/usr/bin/env perl

#  Copyright (C) 2011 DeNA Co.,Ltd.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
#  Foundation, Inc.,
#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

## Note: This is a sample script and is not complete. Modify the script based on your environment.

use strict;
use warnings FATAL => ‘all‘;

use Getopt::Long;
use MHA::DBHelper;
#自定义该组机器的vip
my $vip = "192.168.1.101";
my $if = "eth0";
my (
  $command,        $ssh_user,         $orig_master_host,
  $orig_master_ip, $orig_master_port, $new_master_host,
  $new_master_ip,  $new_master_port,  $new_master_user,
  $new_master_password
);

GetOptions(
  ‘command=s‘             => \$command,
  ‘ssh_user=s‘            => \$ssh_user,
  ‘orig_master_host=s‘    => \$orig_master_host,
  ‘orig_master_ip=s‘      => \$orig_master_ip,
  ‘orig_master_port=i‘    => \$orig_master_port,
  ‘new_master_host=s‘     => \$new_master_host,
  ‘new_master_ip=s‘       => \$new_master_ip,
  ‘new_master_port=i‘     => \$new_master_port,
  ‘new_master_user=s‘     => \$new_master_user,
  ‘new_master_password=s‘ => \$new_master_password,
);

sub add_vip {
        my $output1 = `ssh -o ConnectTimeout=15  -o ConnectionAttempts=3 $orig_master_host /sbin/ip addr del $vip/24 dev $if`;
        my $output2 = `ssh -o ConnectTimeout=15  -o ConnectionAttempts=3 $new_master_host /sbin/ip addr add $vip/24 dev $if`;

}
exit &main();

sub main {
  if ( $command eq "stop" || $command eq "stopssh" ) {

    # $orig_master_host, $orig_master_ip, $orig_master_port are passed.
    # If you manage master ip address at global catalog database,
    # invalidate orig_master_ip here.
    my $exit_code = 1;
    eval {

      # updating global catalog, etc
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "start" ) {

    # all arguments are passed.
    # If you manage master ip address at global catalog database,
    # activate new_master_ip here.
    # You can also grant write access (create user, set read_only=0, etc) here.
    my $exit_code = 10;
    eval {
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );

      ## Set read_only=0 on the new master
      $new_master_handler->disable_log_bin_local();
      print "Set read_only=0 on the new master.\n";
      $new_master_handler->disable_read_only();

      ## Creating an app user on the new master
      #print "Creating app user on the new master..\n";
      #FIXME_xxx_create_user( $new_master_handler->{dbh} );
      $new_master_handler->enable_log_bin_local();
      $new_master_handler->disconnect();

      ## Update master ip on the catalog database, etc
      &add_vip();
      $exit_code = 0;
    };
    if ($@) {
      warn $@;

      # If you want to continue failover, exit 10.
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "status" ) {

    # do nothing
    exit 0;
  }
  else {
    &usage();
    exit 1;
  }
}

sub usage {
  print
"Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}

View Code

master_ip_online_change 手动failover脚本

[root@mysql3 masterha]# cat master_ip_online_change
#!/usr/bin/env perl

#  Copyright (C) 2011 DeNA Co.,Ltd.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
#  Foundation, Inc.,
#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

## Note: This is a sample script and is not complete. Modify the script based on your environment.

use strict;
use warnings FATAL => ‘all‘;

use Getopt::Long;
use MHA::DBHelper;
use MHA::NodeUtil;
use Time::HiRes qw( sleep gettimeofday tv_interval );
use Data::Dumper;

my $_tstart;
my $_running_interval = 0.1;
#添加vip定义
my $vip = "192.168.1.101";
my $if = "eth0";

my (
  $command,              $orig_master_is_new_slave, $orig_master_host,
  $orig_master_ip,       $orig_master_port,         $orig_master_user,
  $orig_master_password, $orig_master_ssh_user,     $new_master_host,
  $new_master_ip,        $new_master_port,          $new_master_user,
  $new_master_password,  $new_master_ssh_user,
);
GetOptions(
  ‘command=s‘                => \$command,
  ‘orig_master_is_new_slave‘ => \$orig_master_is_new_slave,
  ‘orig_master_host=s‘       => \$orig_master_host,
  ‘orig_master_ip=s‘         => \$orig_master_ip,
  ‘orig_master_port=i‘       => \$orig_master_port,
  ‘orig_master_user=s‘       => \$orig_master_user,
  ‘orig_master_password=s‘   => \$orig_master_password,
  ‘orig_master_ssh_user=s‘   => \$orig_master_ssh_user,
  ‘new_master_host=s‘        => \$new_master_host,
  ‘new_master_ip=s‘          => \$new_master_ip,
  ‘new_master_port=i‘        => \$new_master_port,
  ‘new_master_user=s‘        => \$new_master_user,
  ‘new_master_password=s‘    => \$new_master_password,
  ‘new_master_ssh_user=s‘    => \$new_master_ssh_user,
);

exit &main();
sub drop_vip {
        my $output = `ssh -o ConnectTimeout=15  -o ConnectionAttempts=3 $orig_master_host /sbin/ip addr del $vip/24 dev $if`;
        #mysql里的连接全部干掉
        #FIXME
}
sub add_vip {
        my $output = `ssh -o ConnectTimeout=15  -o ConnectionAttempts=3 $new_master_host /sbin/ip addr add $vip/24 dev $if`;

}


sub current_time_us {
  my ( $sec, $microsec ) = gettimeofday();
  my $curdate = localtime($sec);
  return $curdate . " " . sprintf( "%06d", $microsec );
}

sub sleep_until {
  my $elapsed = tv_interval($_tstart);
  if ( $_running_interval > $elapsed ) {
    sleep( $_running_interval - $elapsed );
  }
}

sub get_threads_util {
  my $dbh                    = shift;
  my $my_connection_id       = shift;
  my $running_time_threshold = shift;
  my $type                   = shift;
  $running_time_threshold = 0 unless ($running_time_threshold);
  $type                   = 0 unless ($type);
  my @threads;

  my $sth = $dbh->prepare("SHOW PROCESSLIST");
  $sth->execute();

  while ( my $ref = $sth->fetchrow_hashref() ) {
    my $id         = $ref->{Id};
    my $user       = $ref->{User};
    my $host       = $ref->{Host};
    my $command    = $ref->{Command};
    my $state      = $ref->{State};
    my $query_time = $ref->{Time};
    my $info       = $ref->{Info};
    $info =~ s/^\s*(.*?)\s*$/$1/ if defined($info);
    next if ( $my_connection_id == $id );
    next if ( defined($query_time) && $query_time < $running_time_threshold );
    next if ( defined($command)    && $command eq "Binlog Dump" );
    next if ( defined($user)       && $user eq "system user" );
    next
      if ( defined($command)
      && $command eq "Sleep"
      && defined($query_time)
      && $query_time >= 1 );

    if ( $type >= 1 ) {
      next if ( defined($command) && $command eq "Sleep" );
      next if ( defined($command) && $command eq "Connect" );
    }

    if ( $type >= 2 ) {
      next if ( defined($info) && $info =~ m/^select/i );
      next if ( defined($info) && $info =~ m/^show/i );
    }

    push @threads, $ref;
  }
  return @threads;
}

sub main {
  if ( $command eq "stop" ) {
    ## Gracefully killing connections on the current master
    # 1. Set read_only= 1 on the new master
    # 2. DROP USER so that no app user can establish new connections
    # 3. Set read_only= 1 on the current master
    # 4. Kill current queries
    # * Any database access failure will result in script die.
    my $exit_code = 1;
    eval {
      ## Setting read_only=1 on the new master (to avoid accident)
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error(die_on_error)_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );
      print current_time_us() . " Set read_only on the new master.. ";
      $new_master_handler->enable_read_only();
      if ( $new_master_handler->is_read_only() ) {
        print "ok.\n";
      }
      else {
        die "Failed!\n";
      }
      $new_master_handler->disconnect();

      # Connecting to the orig master, die if any database error happens
      my $orig_master_handler = new MHA::DBHelper();
      $orig_master_handler->connect( $orig_master_ip, $orig_master_port,
        $orig_master_user, $orig_master_password, 1 );

      ## Drop application user so that nobody can connect. Disabling per-session binlog beforehand
      $orig_master_handler->disable_log_bin_local();
     # print current_time_us() . " Drpping app user on the orig master..\n";
      print current_time_us() . " drop vip $vip..\n";
      #drop_app_user($orig_master_handler);
     &drop_vip();

      ## Waiting for N * 100 milliseconds so that current connections can exit
      my $time_until_read_only = 15;
      $_tstart = [gettimeofday];
      my @threads = get_threads_util( $orig_master_handler->{dbh},
        $orig_master_handler->{connection_id} );
      while ( $time_until_read_only > 0 && $#threads >= 0 ) {
        if ( $time_until_read_only % 5 == 0 ) {
          printf
"%s Waiting all running %d threads are disconnected.. (max %d milliseconds)\n",
            current_time_us(), $#threads + 1, $time_until_read_only * 100;
          if ( $#threads < 5 ) {
            print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n"
              foreach (@threads);
          }
        }
        sleep_until();
        $_tstart = [gettimeofday];
        $time_until_read_only--;
        @threads = get_threads_util( $orig_master_handler->{dbh},
          $orig_master_handler->{connection_id} );
      }

      ## Setting read_only=1 on the current master so that nobody(except SUPER) can write
      print current_time_us() . " Set read_only=1 on the orig master.. ";
      $orig_master_handler->enable_read_only();
      if ( $orig_master_handler->is_read_only() ) {
        print "ok.\n";
      }
      else {
        die "Failed!\n";
      }

      ## Waiting for M * 100 milliseconds so that current update queries can complete
      my $time_until_kill_threads = 5;
      @threads = get_threads_util( $orig_master_handler->{dbh},
        $orig_master_handler->{connection_id} );
      while ( $time_until_kill_threads > 0 && $#threads >= 0 ) {
        if ( $time_until_kill_threads % 5 == 0 ) {
          printf
"%s Waiting all running %d queries are disconnected.. (max %d milliseconds)\n",
            current_time_us(), $#threads + 1, $time_until_kill_threads * 100;
          if ( $#threads < 5 ) {
            print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n"
              foreach (@threads);
          }
        }
        sleep_until();
        $_tstart = [gettimeofday];
        $time_until_kill_threads--;
        @threads = get_threads_util( $orig_master_handler->{dbh},
          $orig_master_handler->{connection_id} );
      }

      ## Terminating all threads
      print current_time_us() . " Killing all application threads..\n";
      $orig_master_handler->kill_threads(@threads) if ( $#threads >= 0 );
      print current_time_us() . " done.\n";
      $orig_master_handler->enable_log_bin_local();
      $orig_master_handler->disconnect();

      ## After finishing the script, MHA executes FLUSH TABLES WITH READ LOCK
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "start" ) {
    ## Activating master ip on the new master
    # 1. Create app user with write privileges
    # 2. Moving backup script if needed
    # 3. Register new master‘s ip to the catalog database

# We don‘t return error even though activating updatable accounts/ip failed so that we don‘t interrupt slaves‘ recovery.
# If exit code is 0 or 10, MHA does not abort
    my $exit_code = 10;
    eval {
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );

      ## Set read_only=0 on the new master
      $new_master_handler->disable_log_bin_local();
      print current_time_us() . " Set read_only=0 on the new master.\n";
      $new_master_handler->disable_read_only();

      ## Creating an app user on the new master
      #print current_time_us() . " Creating app user on the new master..\n";
      print current_time_us() . "Add vip $vip on $if..\n";
     # create_app_user($new_master_handler);
      &add_vip();
      $new_master_handler->enable_log_bin_local();
      $new_master_handler->disconnect();

      ## Update master ip on the catalog database, etc
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "status" ) {

    # do nothing
    exit 0;
  }
  else {
    &usage();
    exit 1;
  }
}

sub usage {
  print
"Usage: master_ip_online_change --command=start|stop|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
  die;
}

View Code

7.在主库绑定vip(执行脚本)

sh init._vip.sh

8.检测SSH 是否ok

[root@mysql2 opt]# masterha_check_ssh --global_conf=/etc/masterha/masterha_default.conf --conf=/etc/masterha/app1.conf 
Sat Feb 10 22:00:34 2018 - [info] Reading default configuration from /etc/masterha/masterha_default.conf..
Sat Feb 10 22:00:34 2018 - [info] Reading application default configuration from /etc/masterha/app1.conf..
Sat Feb 10 22:00:34 2018 - [info] Reading server configuration from /etc/masterha/app1.conf..
Sat Feb 10 22:00:34 2018 - [info] Starting SSH connection tests..
Sat Feb 10 22:00:36 2018 - [debug] 
Sat Feb 10 22:00:35 2018 - [debug]  Connecting via SSH from root@192.168.1.135(192.168.1.135:22) to root@192.168.1.16(192.168.1.16:22)..
Sat Feb 10 22:00:36 2018 - [debug]   ok.
Sat Feb 10 22:00:41 2018 - [debug] 
Sat Feb 10 22:00:34 2018 - [debug]  Connecting via SSH from root@192.168.1.16(192.168.1.16:22) to root@192.168.1.135(192.168.1.135:22)..
Sat Feb 10 22:00:41 2018 - [debug]   ok.
Sat Feb 10 22:00:41 2018 - [info] All SSH connection tests passed successfully.

9.检测主从复制情况是否ok

[root@mysql2 opt]# masterha_check_ssh --global_conf=/etc/masterha/masterha_default.conf --conf=/etc/masterha/app1.conf 
Sat Feb 10 22:00:34 2018 - [info] Reading default configuration from /etc/masterha/masterha_default.conf..
Sat Feb 10 22:00:34 2018 - [info] Reading application default configuration from /etc/masterha/app1.conf..
Sat Feb 10 22:00:34 2018 - [info] Reading server configuration from /etc/masterha/app1.conf..
Sat Feb 10 22:00:34 2018 - [info] Starting SSH connection tests..
Sat Feb 10 22:00:36 2018 - [debug] 
Sat Feb 10 22:00:35 2018 - [debug]  Connecting via SSH from root@192.168.1.135(192.168.1.135:22) to root@192.168.1.16(192.168.1.16:22)..
Sat Feb 10 22:00:36 2018 - [debug]   ok.
Sat Feb 10 22:00:41 2018 - [debug] 
Sat Feb 10 22:00:34 2018 - [debug]  Connecting via SSH from root@192.168.1.16(192.168.1.16:22) to root@192.168.1.135(192.168.1.135:22)..
Sat Feb 10 22:00:41 2018 - [debug]   ok.
Sat Feb 10 22:00:41 2018 - [info] All SSH connection tests passed successfully.
[root@mysql2 opt]# 
[root@mysql2 opt]# 
[root@mysql2 opt]# masterha_check_repl --global_conf=/etc/masterha/masterha_default.conf --conf=/etc/masterha/app1.conf 
Sat Feb 10 22:26:50 2018 - [info] Reading default configuration from /etc/masterha/masterha_default.conf..
Sat Feb 10 22:26:50 2018 - [info] Reading application default configuration from /etc/masterha/app1.conf..
Sat Feb 10 22:26:50 2018 - [info] Reading server configuration from /etc/masterha/app1.conf..
Sat Feb 10 22:26:50 2018 - [info] MHA::MasterMonitor version 0.56.
Sat Feb 10 22:26:50 2018 - [info] GTID failover mode = 1
Sat Feb 10 22:26:50 2018 - [info] Dead Servers:
Sat Feb 10 22:26:50 2018 - [info] Alive Servers:
Sat Feb 10 22:26:50 2018 - [info]   192.168.1.16(192.168.1.16:3306)
Sat Feb 10 22:26:50 2018 - [info]   192.168.1.135(192.168.1.135:3306)
Sat Feb 10 22:26:50 2018 - [info] Alive Slaves:
Sat Feb 10 22:26:50 2018 - [info]   192.168.1.16(192.168.1.16:3306)  Version=5.7.17-log (oldest major version between slaves) log-bin:enabled
Sat Feb 10 22:26:50 2018 - [info]     GTID ON
Sat Feb 10 22:26:50 2018 - [info]     Replicating from 192.168.1.135(192.168.1.135:3306)
Sat Feb 10 22:26:50 2018 - [info]     Primary candidate for the new Master (candidate_master is set)
Sat Feb 10 22:26:50 2018 - [info] Current Alive Master: 192.168.1.135(192.168.1.135:3306)
Sat Feb 10 22:26:50 2018 - [info] Checking slave configurations..
Sat Feb 10 22:26:50 2018 - [info]  read_only=1 is not set on slave 192.168.1.16(192.168.1.16:3306).
Sat Feb 10 22:26:50 2018 - [info] Checking replication filtering settings..
Sat Feb 10 22:26:50 2018 - [info]  binlog_do_db= , binlog_ignore_db= 
Sat Feb 10 22:26:50 2018 - [info]  Replication filtering check ok.
Sat Feb 10 22:26:50 2018 - [info] GTID (with auto-pos) is supported. Skipping all SSH and Node package checking.
Sat Feb 10 22:26:50 2018 - [info] Checking SSH publickey authentication settings on the current master..
Sat Feb 10 22:26:51 2018 - [info] HealthCheck: SSH to 192.168.1.135 is reachable.
Sat Feb 10 22:26:51 2018 - [info] 
192.168.1.135(192.168.1.135:3306) (current master)
 +--192.168.1.16(192.168.1.16:3306)

Sat Feb 10 22:26:51 2018 - [info] Checking replication health on 192.168.1.16..
Sat Feb 10 22:26:51 2018 - [info]  ok.
Sat Feb 10 22:26:51 2018 - [info] Checking master_ip_failover_script status:
Sat Feb 10 22:26:51 2018 - [info]   /etc/masterha/master_ip_failover --command=status --ssh_user=root --orig_master_host=192.168.1.135 --orig_master_ip=192.168.1.135 --orig_master_port=3306 
Sat Feb 10 22:26:51 2018 - [info]  OK.
Sat Feb 10 22:26:51 2018 - [warning] shutdown_script is not defined.
Sat Feb 10 22:26:51 2018 - [info] Got exit code 0 (Not master dead).

MySQL Replication Health is OK.

10.设置从库上的 relay_log_purge=0 以及 read_only=1 (只读)

‘set global relay_log_purge=0‘

‘set global read_only=1‘

应用差异的中继日志到其他从库的时候也许会用到 ,但是我们这里一主一从其实不必配置,如果设置了 relay_log_purge=0 的话,又怕从库的relay log产生过多,这时候我们可以使用purge_relay_logs 命令定时删除,这个是MHA自带的

可以写成一个脚本定时删除如下:

#!/bin/bash

user=zhuch
passwd=zhuch
port=3306
log_dir=‘/etc/masterha/log‘
work_dir=‘/etc/masterha/relay_log_node‘
purge=‘/usr/bin/purge_relay_logs‘


if [ ! -d $log_dir ]
then
    mkdir $log_dir -p
fi

if [ ! -d $work_dir ]
then
    mkdir $work_dir -p

fi

$purge --user=$user --password=$passwd --disable_relay_log_purge --port=$port --workdir=$work_dir >> $log_dir/purge_relay_logs.log 2>&1

基本上MHA 就已经搭建完了 ,主库挂掉后会切换到从库并且vip 也会漂移到从库

二安装配置proxysql

1.安装

下载地址 https://www.percona.com/downloads/proxysql/

rpm -ivh proxysql-1.4.3-1-centos67.x86_64.rpm

2.配置登入proxysql 把MySQL主从信息添加进去,将主库master放入写节点中,也加就是hostgroup_id 为100中,slave节点做读放到1000中

mysql -uadmin -padmin -P6032 -h127.0.0.1

但是注意:这里我直接将写节点的设置为 VIP 192.168.1.101

insert into mysql_servers(hostgroup_id,hostname,port,weight,max_connections,max_replication_lag,comment) values(100,‘192.168.1.101‘,3306,1,1000,10,‘vip‘);

insert into mysql_servers(hostgroup_id,hostname,port,weight,max_connections,max_replication_lag,comment) values(1000,‘192.168.1.16‘,3306,1,1000,10,‘slave‘

admin@ 23:16:  [(none)]> select * from mysql_servers;
+--------------+---------------+------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------------+
| hostgroup_id | hostname      | port | status | weight | compression | max_connections | max_replication_lag | use_ssl | max_latency_ms | comment       |
+--------------+---------------+------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------------+
| 100          | 192.168.1.101 | 3306 | ONLINE | 1      | 0           | 1000            | 10                  | 0       | 0              | test proxysql |
| 1000         | 192.168.1.16  | 3306 | ONLINE | 9      | 0           | 1000            | 10                  | 0       | 0              | test proxysql |
+--------------+---------------+------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------------+

3. 配置后端使用的MySQL用户,需要先在后端MySQL(135,16) 里真实存在,一个是监控账号,一个是程序账号:

GRANT ALL PRIVILEGES ON *.* TO ‘proxysql‘@‘192.168.1.16‘  identified by ‘proxysql‘
GRANT ALL PRIVILEGES ON *.* TO ‘sbuser‘@‘%‘ identified by ‘sbuser‘

在后端MySQL里添加完之后再配置proxysql: 这里需要注意,default_hostgroup需要和上面的对应

insert into mysql_users(username,password,active,default_hostgroup,transaction_persistent) values(‘sbuser‘,‘sbuser‘,1,100,1);

admin@ 23:37:  [(none)]> select * from mysql_users;
+----------+-------------------------------------------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+
| username | password                                  | active | use_ssl | default_hostgroup | default_schema | schema_locked | transaction_persistent | fast_forward | backend | frontend | max_connections |
+----------+-------------------------------------------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+
| sbuser   | sbuser　　　　　　　　　　　　　　　　　　　　　 | 1      | 0       | 100               |                | 0             | 1                      | 0            | 1       | 1        | 10000           |
+----------+-------------------------------------------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+

4.设置健康的监测账号

admin@ 23:37:  [(none)]>set mysql-monitor_username=‘proxysql‘;

admin@ 23:37:  [(none)]>set mysql-monitor_password=‘proxysql‘;

-- 应用到线上

load mysql servers to runtime;
load mysql users to runtime;
load mysql variables to runtime;


-- 持久化
save mysql servers to disk;
save mysql users to disk;
save mysql variables to disk;

要是是用明文密码设置mysql_users，在这里可以用save命令来转换成了hash值的密码：

save mysql users to mem;

admin@ 23:39:  [(none)]> select * from mysql_users;
+----------+-------------------------------------------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+
| username | password                                  | active | use_ssl | default_hostgroup | default_schema | schema_locked | transaction_persistent | fast_forward | backend | frontend | max_connections |
+----------+-------------------------------------------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+
| sbuser   | *CA96E56547F43610DDE9EB7B12B4EF4C51CDDFFC | 1      | 0       | 100               |                | 0             | 1                      | 0            | 1       | 1        | 10000           |
+----------+-------------------------------------------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+

5.配置路由

-- 发送到M
admin@127.0.0.1 : (none) 04:58:11>INSERT INTO mysql_query_rules(active,match_pattern,destination_hostgroup,apply) VALUES(1,‘^SELECT.*FOR UPDATE$‘,100,1);
Query OK, 1 row affected (0.00 sec)
-- 发送到S
admin@127.0.0.1 : (none) 05:08:17>INSERT INTO mysql_query_rules(active,match_pattern,destination_hostgroup,apply) VALUES(1,‘^SELECT‘,1000,1);
Query OK, 1 row affected (0.00 sec)

admin@127.0.0.1 : (none) 05:09:37>load mysql query rules to runtime;
Query OK, 0 rows affected (0.00 sec)
admin@127.0.0.1 : (none) 05:09:57>save mysql query rules to disk;
Query OK, 0 rows affected (0.00 sec)

6.连接数据库6033 测试读写分离

[root@mysql2 sysbench]# mysql -usbuser -psbuser -P6033 -h192.168.1.16

sbuser@ 23:59:  [(none)]> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| performance_schema |
| sys                |
| z1_email           |
| z1_exchange        |
| z1_relation        |
+--------------------+
7 rows in set (0.03 sec)

sbuser@ 00:02:  [(none)]> 
sbuser@ 00:02:  [(none)]> 
sbuser@ 00:02:  [(none)]> use z1_email;
Database changed, 2 warnings
sbuser@ 00:02:  [z1_email]> 
sbuser@ 00:02:  [z1_email]> insert into a1 values(134);
Query OK, 1 row affected (0.01 sec)

sbuser@ 00:03:  [z1_email]> insert into a1 values(146);
Query OK, 1 row affected (0.01 sec)

sbuser@ 00:03:  [z1_email]> insert into a1 values(157);
Query OK, 1 row affected (0.02 sec)

sbuser@ 00:03:  [z1_email]> 
sbuser@ 00:03:  [z1_email]> selet * from a1;
ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ‘selet * from a1‘ at line 1
sbuser@ 00:03:  [z1_email]> 
sbuser@ 00:03:  [z1_email]> 
sbuser@ 00:03:  [z1_email]> 
sbuser@ 00:03:  [z1_email]> 
sbuser@ 00:03:  [z1_email]> select * from a1;
+------+
| id   |
+------+
|    1 |
|    2 |
|   12 |
|   13 |
|   14 |
|  111 |
|  222 |
|  333 |
|  250 |
|    5 |
|    6 |
|    7 |
|    8 |
|    9 |
|   10 |
|   11 |
|   12 |
|   13 |
|   14 |
|   15 |
|   15 |
|   15 |
|   16 |
|  123 |
|  124 |
|   17 |
| 1000 |
| 1001 |
| 1002 |
| 1003 |
| 1003 |
| 1004 |
| 1004 |
|  134 |
|  146 |
|  157 |
+------+
36 rows in set (0.00 sec)

进入管理账户6032端口查看,可以看到的确有读写分离已经完成了

admin@ 00:10:  [(none)]> select * from stats_mysql_query_digest;
+-----------+--------------------+----------+--------------------+--------------------------+------------+------------+------------+----------+----------+----------+
| hostgroup | schemaname         | username | digest             | digest_text              | count_star | first_seen | last_seen  | sum_time | min_time | max_time |
+-----------+--------------------+----------+--------------------+--------------------------+------------+------------+------------+----------+----------+----------+
| 1000      | z1_email           | sbuser   | 0xB17CC7AAA7E39A4A | select * from a1         | 1          | 1518278606 | 1518278606 | 2123     | 2123     | 2123     |
| 100       | z1_email           | sbuser   | 0x496C8B86BBC0D398 | insert into a1 values(?) | 3          | 1518278580 | 1518278588 | 30478    | 6373     | 16671    |
| 1000      | information_schema | sbuser   | 0x620B328FE9D6D71A | SELECT DATABASE()        | 1          | 1518278568 | 1518278568 | 508      | 508      | 508      |
| 100       | information_schema | sbuser   | 0x02033E45904D3DF0 | show databases           | 1          | 1518278563 | 1518278563 | 30233    | 30233    | 30233    |
+-----------+--------------------+----------+--------------------+--------------------------+------------+------------+------------+----------+----------+----------+
4 rows in set (0.00 sec)

三测试

1. 模拟主库宕机的情况

分析:主库挂掉后proxysql的写入情况

主库故障,使用MHA 手动failover 将 vip 切换到从库 192.168.1.16上 ,此时 192.168.1.16 上的 vip是192.168.1.101

admin@ 00:17:  [(none)]> select hostgroup_id,hostname,port,status,weight from runtime_mysql_servers;
+--------------+---------------+------+--------+--------+
| hostgroup_id | hostname      | port | status | weight |
+--------------+---------------+------+--------+--------+
| 100          | 192.168.1.101 | 3306 | ONLINE | 1      |
| 1000         | 192.168.1.16  | 3306 | ONLINE | 9      |
+--------------+---------------+------+--------+--------+
2 rows in set (0.00 sec)

从上面可以看出来 mysql_servers 中的 hostname 的写是192.168.1.101 读是192.168.1.16,这样一来是不是主库挂了后手动切换后就可以直接写了呢? 测试一下

在主节点上模拟主库挂掉的情况
[root@mysql3 masterha]# ps -ef |grep mysql
mysql     2020 65360  0 Feb10 pts/1    00:00:58 mysqld --defaults-file=/etc/my.cnf
root      5356 65360  0 00:43 pts/1    00:00:00 grep mysql
[root@mysql3 masterha]# 
[root@mysql3 masterha]# 
[root@mysql3 masterha]# kill -9 2020

然后去6033 程序端口查看是否可以写发现报错了超时

sbuser@ 00:57:  [z1_email]> insert into a1 values(158);
ERROR 9001 (HY000): Max connect timeout reached while reaching hostgroup 100 after 10001ms

然后去6033 程序端口查看是否可以读发现也报错了超时

MHA + proxysql 高可用以及读写分离

标签：percona kill either printf distrib warning invalid ring ==

原文地址：https://www.cnblogs.com/yingdiblog/p/8438428.html

踩

(0)

评论一句话评论（0）

分享档案

更多>

2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)

周排行

MHA + proxysql 高可用以及读写分离

环境

一 MHA的搭建

二 安装配置proxysql

三 测试

二安装配置proxysql

三测试