码迷,mamicode.com
首页 > 编程语言 > 详细

Manjaro下带供电的USB Hub提示error -71

时间:2018-03-04 13:00:22      阅读:575      评论:0      收藏:0      [点我收藏+]

标签:ble   rate   article   电量   ram   帮助   测试   pre   描述   

问题描述

这款USB Hub是绿联出的1转7带供电的白色款。
lsusb中显示为

Bus 004 Device 023: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 004 Device 022: ID 05e3:0612 Genesys Logic, Inc. Hub

在插入后dmesg输出

[ 1855.415644] usb 4-1: new SuperSpeed USB device number 24 using xhci_hcd
[ 1855.439522] hub 4-1:1.0: USB hub found
[ 1855.439901] hub 4-1:1.0: 4 ports detected
[ 1855.555367] usb 3-1: new full-speed USB device number 39 using xhci_hcd
[ 1855.678791] usb 3-1: device descriptor read/64, error -71
[ 1855.908781] usb 3-1: device descriptor read/64, error -71
[ 1856.092320] usb 4-1.3: new SuperSpeed USB device number 25 using xhci_hcd
[ 1856.116606] hub 4-1.3:1.0: USB hub found
[ 1856.116891] hub 4-1.3:1.0: 4 ports detected
[ 1856.232072] usb 3-1: new full-speed USB device number 40 using xhci_hcd
[ 1856.355388] usb 3-1: device descriptor read/64, error -71
[ 1856.588724] usb 3-1: device descriptor read/64, error -71
[ 1856.695447] usb usb3-port1: attempt power cycle
[ 1857.338707] usb 3-1: new full-speed USB device number 41 using xhci_hcd
[ 1857.338834] usb 3-1: Device not responding to setup address.
[ 1857.548835] usb 3-1: Device not responding to setup address.
[ 1857.755378] usb 3-1: device not accepting address 41, error -71
[ 1857.878748] usb 3-1: new full-speed USB device number 42 using xhci_hcd
[ 1857.878928] usb 3-1: Device not responding to setup address.
[ 1858.085480] usb 3-1: Device not responding to setup address.
[ 1858.292078] usb 3-1: device not accepting address 42, error -71
[ 1858.292115] usb usb3-port1: unable to enumerate USB device

解决方法

  • 笔记本供电不足,需要连接笔记本电源
    这个问题研究了几个小时看了很多资料,也有帖子提到了供电,我也连接了额外的5v电源。直到笔记本提示电量不足,才真正解决。

其他

看了很多帖子,都有提到修改usbcore的配置,具体也没有测试,可能对读者有些帮助。
http://www.guyrutenberg.com/2008/06/26/usb-1-4-device-descriptor-read64-error-71/
http://blog.csdn.net/kenny_wju/article/details/9091395
中都有提到echo Y > /sys/module/usbcore/parameters/old_scheme_first,设置为优先使用旧的兼容方案。

参考资料:http://blog.csdn.net/tiny_pi/article/details/20529219

Manjaro下带供电的USB Hub提示error -71

标签:ble   rate   article   电量   ram   帮助   测试   pre   描述   

原文地址:https://www.cnblogs.com/zhuxiaoxi/p/8504211.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!