码迷,mamicode.com
首页 > 系统相关 > 详细

linux dsp 播放音频文件

时间:2014-09-23 00:45:53      阅读:412      评论:0      收藏:0      [点我收藏+]

标签:style   blog   color   io   os   使用   ar   文件   div   

#include <unistd.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <stdlib.h>
#include <stdio.h>
#include <linux/soundcard.h>
/* 下面的三个参数是跟具体文件相关
 * cmd: file 音频文件
 * [file pass.wav] =>> pass.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, mono 44100 Hz
 *  1. 16位
 *  2. mono为当声道=1, Stereo为立体声=2
 *  3. 44100HZ为频率这个大家都知道,及一秒钟采集或者播放音频的bit数量。
 */
#define RATE 44100
#define SIZE 16
#define CHANNELS 1  // 1表示单声道,2为立体/* 缓冲区 */
unsigned char buff[RATE * SIZE * CHANNELS / 8]; //buff里面正好放一秒钟的音频

int main()
{
    int fd;
    int wavfd; /* wav文件的描述符 */
    int arg;   /* ioctl参数 */
    int ret;   /* 返回值 */
    /* 打开dsp音频设备 */
    fd = open("/dev/dsp", O_WRONLY);
    if (fd < 0) {
        printf("open of /dev/dsp failed");
        exit(1);
    }
    wavfd = open("pass.wav",O_RDONLY);
    if (wavfd < 0) {
        printf("open of wav failed");
        close(fd);
        exit(1);
    }

    /* 设置bit */
    arg = SIZE;
    ret = ioctl(fd, SOUND_PCM_WRITE_BITS, &arg);
    if (ret == -1)
         perror("SOUND_PCM_WRITE_BITS ioctl failed");
    if (arg != SIZE)
         perror("unable to set sample size");

    /* 设置channels */
    arg = CHANNELS;
    ret = ioctl(fd, SOUND_PCM_WRITE_CHANNELS, &arg);
    if (ret == -1)
        perror("SOUND_PCM_WRITE_CHANNELS ioctl failed");
    if (arg != CHANNELS)
        perror("unable to set number of channels");

    /* 设置rate */
    arg = RATE;
    ret = ioctl(fd, SOUND_PCM_WRITE_RATE, &arg);
    if (ret == -1)
        perror("SOUND_PCM_WRITE_WRITE ioctl failed");

    /* 从wav文件中读buff大小的内容,然后写入/dev/dsp中,直到文件结束 */
  /* Q:这里我试验时播放了两次,不知道啥情况,如果大家也遇到了请指教。*/
    while ((ret = read(wavfd, buff, sizeof(buff))) > 0) {
        //printf("read size = %d\n", ret);
        write(fd, buff, sizeof(buff));
        /* 下面的代码用于在更改播放文件的参数时,播放掉缓冲区内的内容 */
        ret = ioctl(fd, SOUND_PCM_SYNC, 0);
        if (ret == -1)
            perror("SOUND_PCM_SYNC ioctl failed");
    }

    close(fd);
    close(wavfd);
}


下面是封装的接口可以直接拿过来使用:

void play_audio(int rate, int bits, int channels, char *filename)
{
    int fd;
    int wavfd; /* wav文件的描述符 */
    int arg;   /* ioctl arg */
    int ret;   /* return value */

    unsigned char buff[rate * bits * channels / 8]; //buff里面正好放一秒钟的音频
    /* open device */
    fd = open("/dev/dsp", O_WRONLY);
    if (fd < 0) {
        printf("open of /dev/dsp failed");
        exit(1);
    }
    wavfd = open(filename, O_RDONLY);
    if (wavfd < 0) {
        printf("open of wav failed");
        close(fd);
        exit(1);
    }

    /* set bits */
    arg = bits;
    ret = ioctl(fd, SOUND_PCM_WRITE_BITS, &arg);
    if (ret == -1)
         perror("SOUND_PCM_WRITE_BITS ioctl failed");
    if (arg != SIZE)
         perror("unable to set sample size");

    /* set channels */
    arg = channels;
    ret = ioctl(fd, SOUND_PCM_WRITE_CHANNELS, &arg);
    if (ret == -1)
        perror("SOUND_PCM_WRITE_CHANNELS ioctl failed");
    if (arg != CHANNELS)
        perror("unable to set number of channels");

    /* set rate */
    arg = rate;
    ret = ioctl(fd, SOUND_PCM_WRITE_RATE, &arg);
    if (ret == -1)
        perror("SOUND_PCM_WRITE_WRITE ioctl failed");

    /* 从wav文件中读buff大小的内容,然后写入/dev/dsp中,直到文件结束 */
    while ((ret = read(wavfd, buff, sizeof(buff))) > 0) {
        printf("read size = %d\n", ret);
        write(fd, buff, sizeof(buff));
        /* 下面的代码用于在更改播放文件的参数时,播放掉缓冲区内的内容 */
        ret = ioctl(fd, SOUND_PCM_SYNC, 0);
        if (ret == -1)
            perror("SOUND_PCM_SYNC ioctl failed");
    }

    close(fd);
    close(wavfd);
}

 

linux dsp 播放音频文件

标签:style   blog   color   io   os   使用   ar   文件   div   

原文地址:http://www.cnblogs.com/Daniel-G/p/3987229.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!