标签：style http io os ar sp art cti on
I‘m trying to build a 1:n dev environment,with the help of Vsever(just like VMware worked on sever)
Things seem to be OK while I copy the os mirror to the virtual pc and install it.
Building My IDE(python+npp), Installing libraries needed, vcredist_x64 and WAMP are also small case.
The IPs config just like this:
10.10.x.x is the ip of Virtual PCs and 172.16.x.x are of Real PCs.
The net gate join 10.10.10.1 with 172.16.1.1 so that the V and the R are combined as one.
10.10.10.130---------------------|
10.10.10.131---------------------|
10.10.10.132---------------------|
10.10.10.133---------------------|
10.10.10.134---------------------|
|
NET GATE: 10.10.10.1--::---172.16.1.1
|
172.16.6.66(+10.10.10.197)----|
After all above,I start the WAMPserver service and got an green status, it worked!
check into my pc,type http://10.10.10.130:80 in the broswer::The traditional WAMP index page appears--connecting with virtual pc by http is OK!
reverse:
start WAMPserver in real PC and type http://172.16.6.66:80 can get the same result
It seems that all things are OK,but, while I try to use Navicat connect whit mysql in 10.10.10.130:3306, I got a 10061.
To my confused,It‘s ok to connect 172.16.6.66:3306 with Navicat from Virtual PC(10.10.10.130).
Just Like This:
From Http:(In Broswer)
10.10.10.x <--------------------> 172.16.6.66
From IP:PORT(In Navicat)
10.10.10.x ---------------------> 172.16.6.66
10.10.10.x <-----------X--------- 172.16.6.66
I wander if there are some fucking configuration in the IP_conf
After several trys ...orz
Chart with friends in qq group and XXX says that it may because of the fire wall configuration.
Googled it!
In The Fire Wall Configuration:
build a new port rule that allow the 3306 blablablabla.
named the rule with a XXX name and save
OVER~
Problem:To Connect with MySQL in Virtual PC Environment
标签：style http io os ar sp art cti on
原文地址：http://www.cnblogs.com/MrWho/p/3989589.html
