标签：src 0 rows unique hid like 复合 modify oba lap
约束条件与数据类型的宽度一样，都是可选参数
作用：用于保证数据的完整性和一致性
主要分为：
PRIMARY KEY (PK) 标识该字段为该表的主键，可以唯一的标识记录
FOREIGN KEY (FK) 标识该字段为该表的外键
NOT NULL 标识该字段不能为空
UNIQUE KEY (UK) 标识该字段的值是唯一的
AUTO_INCREMENT 标识该字段的值自动增长（整数类型，而且为主键）
DEFAULT 为该字段设置默认值
UNSIGNED 无符号
ZEROFILL 使用0填充
说明：
1. 是否允许为空，默认NULL，可设置NOT NULL，字段不允许为空，必须赋值 2. 字段是否有默认值，缺省的默认值是NULL，如果插入记录时不给字段赋值，此字段使用默认值 sex enum(‘male‘,‘female‘) not null default ‘male‘ age int unsigned NOT NULL default 20 必须为正值（无符号） 不允许为空 默认是20 3. 是否是key 主键 primary key 外键 foreign key 索引 (index,unique...)
是否可空，null表示空，非字符串
not null - 不可空
null - 可空
默认值，创建列时可以指定默认值，当插入数据时如果未主动设置，则自动添加默认值
create table tb1(
nid int not null defalut 2,
num int not null
)
==================not null==================== mysql> create table t1(id int); #id字段默认可以插入空 mysql> desc t1; +-------+---------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +-------+---------+------+-----+---------+-------+ | id | int(11) | YES | | NULL | | +-------+---------+------+-----+---------+-------+ mysql> insert into t1 values(); #可以插入空 mysql> create table t2(id int not null); #设置字段id不为空 mysql> desc t2; +-------+---------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +-------+---------+------+-----+---------+-------+ | id | int(11) | NO | | NULL | | +-------+---------+------+-----+---------+-------+ mysql> insert into t2 values(); #不能插入空 ERROR 1364 (HY000): Field ‘id‘ doesn‘t have a default value ==================default==================== #设置id字段有默认值后，则无论id字段是null还是not null，都可以插入空，插入空默认填入default指定的默认值 mysql> create table t3(id int default 1); mysql> alter table t3 modify id int not null default 1;
============设置唯一约束 UNIQUE=============== 方法一： create table department1( id int, name varchar(20) unique, comment varchar(100) ); 方法二： create table department2( id int, name varchar(20), comment varchar(100), constraint uk_name unique(name) ); mysql> insert into department1 values(1,‘IT‘,‘技术‘); Query OK, 1 row affected (0.00 sec) mysql> insert into department1 values(1,‘IT‘,‘技术‘); ERROR 1062 (23000): Duplicate entry ‘IT‘ for key ‘name‘
mysql> create table t1(id int not null unique); Query OK, 0 rows affected (0.02 sec) mysql> desc t1; +-------+---------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +-------+---------+------+-----+---------+-------+ | id | int(11) | NO | PRI | NULL | | +-------+---------+------+-----+---------+-------+ 1 row in set (0.00 sec)
create table service( id int primary key auto_increment, name char(20), host char(15) not null, port int not null, unique(host,port) #联合唯一 ); mysql> insert into service values -> (1,‘nginx‘,‘192.168.0.10‘,80), -> (2,‘haproxy‘,‘192.168.0.20‘,80), -> (3,‘mysql‘,‘192.168.0.30‘,3306) -> ; Query OK, 3 rows affected (0.01 sec) Records: 3 Duplicates: 0 Warnings: 0 mysql> insert into service(name,host,port) values(‘nginx‘,‘192.168.0.10‘,80); ERROR 1062 (23000): Duplicate entry ‘192.168.0.10-80‘ for key ‘host‘
从约束角度看primary key字段的值不为空且唯一，那我们直接使用not null+unique不就可以了吗，要它干什么？
主键primary key是innodb存储引擎组织数据的依据，innodb称之为索引组织表，一张表中必须有且只有一个主键。
一个表中可以：
单列做主键
多列做主键（复合主键）
============单列做主键=============== #方法一：not null+unique create table department1( id int not null unique, #主键 name varchar(20) not null unique, comment varchar(100) ); mysql> desc department1; +---------+--------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +---------+--------------+------+-----+---------+-------+ | id | int(11) | NO | PRI | NULL | | | name | varchar(20) | NO | UNI | NULL | | | comment | varchar(100) | YES | | NULL | | +---------+--------------+------+-----+---------+-------+ rows in set (0.01 sec) #方法二：在某一个字段后用primary key create table department2( id int primary key, #主键 name varchar(20), comment varchar(100) ); mysql> desc department2; +---------+--------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +---------+--------------+------+-----+---------+-------+ | id | int(11) | NO | PRI | NULL | | | name | varchar(20) | YES | | NULL | | | comment | varchar(100) | YES | | NULL | | +---------+--------------+------+-----+---------+-------+ rows in set (0.00 sec) #方法三：在所有字段后单独定义primary key create table department3( id int, name varchar(20), comment varchar(100), constraint pk_name primary key(id); #创建主键并为其命名pk_name mysql> desc department3; +---------+--------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +---------+--------------+------+-----+---------+-------+ | id | int(11) | NO | PRI | NULL | | | name | varchar(20) | YES | | NULL | | | comment | varchar(100) | YES | | NULL | | +---------+--------------+------+-----+---------+-------+ rows in set (0.01 sec)
PS:有的童靴可能会问，我刚开始创建表的时候，也没指定主键，在Mysql系统中依靠主键为组织数据的依据，Mysql系统会自动绑定的合适n的对象，
还有一种情况，没有合适的对象，就隐藏在系统中，是看不到的。总之一张表必须有且只有一个主键
==================多列做主键================ create table service( ip varchar(15), port char(5), service_name varchar(10) not null, primary key(ip,port) ); mysql> desc service; +--------------+-------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +--------------+-------------+------+-----+---------+-------+ | ip | varchar(15) | NO | PRI | NULL | | | port | char(5) | NO | PRI | NULL | | | service_name | varchar(10) | NO | | NULL | | +--------------+-------------+------+-----+---------+-------+ 3 rows in set (0.00 sec) mysql> insert into service values -> (‘172.16.45.10‘,‘3306‘,‘mysqld‘), -> (‘172.16.45.11‘,‘3306‘,‘mariadb‘) -> ; Query OK, 2 rows affected (0.00 sec) Records: 2 Duplicates: 0 Warnings: 0 mysql> insert into service values (‘172.16.45.10‘,‘3306‘,‘nginx‘); ERROR 1062 (23000): Duplicate entry ‘172.16.45.10-3306‘ for key ‘PRIMARY‘
约束字段为自动增长，被约束的字段必须同时被key约束
#不指定id，则自动增长 create table student( id int primary key auto_increment, name varchar(20), sex enum(‘male‘,‘female‘) default ‘male‘ ); mysql> desc student; +-------+-----------------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +-------+-----------------------+------+-----+---------+----------------+ | id | int(11) | NO | PRI | NULL | auto_increment | | name | varchar(20) | YES | | NULL | | | sex | enum(‘male‘,‘female‘) | YES | | male | | +-------+-----------------------+------+-----+---------+----------------+ mysql> insert into student(name) values -> (‘qian‘), -> (‘best‘) -> ; mysql> select * from student; +----+------+------+ | id | name | sex | +----+------+------+ | 1 | qian | male | | 2 | best | male | +----+------+------+ #也可以指定id mysql> insert into student values(4,‘duo‘,‘female‘); Query OK, 1 row affected (0.00 sec) mysql> insert into student values(7,‘liang‘,‘female‘); Query OK, 1 row affected (0.00 sec) mysql> select * from student; +----+------+--------+ | id | name | sex | +----+------+--------+ | 1 | qian | male | | 2 | best | male | | 4 | duo | female | | 7 | liang | female | +----+------+--------+ #对于自增的字段，在用delete删除后，再插入值，该字段仍按照删除前的位置继续增长 mysql> delete from student; Query OK, 4 rows affected (0.00 sec) mysql> select * from student; Empty set (0.00 sec) mysql> insert into student(name) values(‘ze‘); mysql> select * from student; +----+------+------+ | id | name | sex | +----+------+------+ | 8 | ze | male | +----+------+------+ #应该用truncate清空表，比起delete一条一条地删除记录，truncate是直接清空表，在删除大表时用它 mysql> truncate student; Query OK, 0 rows affected (0.01 sec) mysql> insert into student(name) values(‘many‘); Query OK, 1 row affected (0.01 sec) mysql> select * from student; +----+------+------+ | id | name | sex | +----+------+------+ | 1 | many | male | +----+------+------+ 1 row in set (0.00 sec)
了解知识
#在创建完表后，修改自增字段的起始值 mysql> create table student( -> id int primary key auto_increment, -> name varchar(20), -> sex enum(‘male‘,‘female‘) default ‘male‘ -> ); mysql> alter table student auto_increment=3; mysql> show create table student; ....... ENGINE=InnoDB AUTO_INCREMENT=3 DEFAULT CHARSET=utf8 mysql> insert into student(name) values(‘qian‘); Query OK, 1 row affected (0.01 sec) mysql> select * from student; +----+------+------+ | id | name | sex | +----+------+------+ | 3 | qian | male | +----+------+------+ row in set (0.00 sec) mysql> show create table student; ....... ENGINE=InnoDB AUTO_INCREMENT=4 DEFAULT CHARSET=utf8 #也可以创建表时指定auto_increment的初始值，注意初始值的设置为表选项，应该放到括号外 create table student( id int primary key auto_increment, name varchar(20), sex enum(‘male‘,‘female‘) default ‘male‘ )auto_increment=3; #设置步长 sqlserver：自增步长 基于表级别 create table t1（ id int。。。 ）engine=innodb,auto_increment=2 步长=2 default charset=utf8 mysql自增的步长： show session variables like ‘auto_inc%‘; #基于会话级别 set session auth_increment_increment=2 #修改会话级别的步长 #基于全局级别的 set global auth_increment_increment=2 #修改全局级别的步长（所有会话都生效） #！！！注意了注意了注意了！！！ If the value of auto_increment_offset is greater than that of auto_increment_increment, the value of auto_increment_offset is ignored. 翻译：如果auto_increment_offset的值大于auto_increment_increment的值，则auto_increment_offset的值会被忽略 ，这相当于第一步步子就迈大了，扯着了蛋 比如：设置auto_increment_offset=3，auto_increment_increment=2 mysql> set global auto_increment_increment=5; Query OK, 0 rows affected (0.00 sec) mysql> set global auto_increment_offset=3; Query OK, 0 rows affected (0.00 sec) mysql> show variables like ‘auto_incre%‘; #需要退出重新登录 +--------------------------+-------+ | Variable_name | Value | +--------------------------+-------+ | auto_increment_increment | 1 | | auto_increment_offset | 1 | +--------------------------+-------+ create table student( id int primary key auto_increment, name varchar(20), sex enum(‘male‘,‘female‘) default ‘male‘ ); mysql> insert into student(name) values(‘qian1‘),(‘qian2‘),(‘qian3‘); mysql> select * from student; +----+-------+------+ | id | name | sex | +----+-------+------+ | 3 | qian1 | male | | 8 | qian2 | male | | 13 | qian3 | male | +----+-------+------+
待续。。。还在整理。。。
标签：src 0 rows unique hid like 复合 modify oba lap
原文地址：https://www.cnblogs.com/ManyQian/p/9010628.html
