标签：device his ipa uid 例子 原来 ip地址 name tor
修改网卡eth0
vim /etc/sysconfig/network-scripts/ifcfg-eth0
++++++++++++++++++++++++++++++++
DEVICE="eth0"
BOOTPROTO="static" #将原来的值“dhcp”改为“static”
HWADDR="00:0C:29:F2:4E:96"
IPV6INIT="yes"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
UUID="b68b1ef8-13a0-4d11-a738-1ae704e6a0a4"
IPADDR=192.168.1.16 #你需要定义的IP地址
#以下两个的值如果不清楚的话，可以打开你本地的电脑，--》控制面板\所有控制面板项\网络和共享中心\本地连接\详细信息
NETMASK=255.255.255.0 #子网掩码
GATEWAY=192.168.1.1 #默认网关
++++++++++++++++++++++++++++++++
保存退出
重启网络服务
service network restart
------------------------------------------------------------------------------
ifconfig...没有看到eth0.。然后重启网卡又报下面错误。
故障现象：
service network restart
Shutting down loopback insterface:
[ OK ]
Bringing up loopback insterface:
[ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]
解决办法：
首先，打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：
# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
记录下，eth1网卡的mac地址00:0c:29:50:bd:17
接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
将 DEVICE="eth0" 改成 DEVICE="eth1" ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最后，重启网络
# service network restart
或者
# /etc/init.d/network restart
标签：device his ipa uid 例子 原来 ip地址 name tor
原文地址：https://www.cnblogs.com/yanghaotai/p/9078108.html
