[Selenium+Java] Selenium Grid Tutorial: Command Line and JSON Example

标签：single   follow   machines   play   type   ring   chrome   central   debug   

Original URL: https://www.guru99.com/introduction-to-selenium-grid.html

What is Selenium Grid?

Selenium Grid is a part of the Selenium Suite that specializes in running multiple tests across different browsers, operating systems, and machines in parallel.

Selenium Grid has 2 versions - the older Grid 1 and the newer Grid 2. We will only focus on Grid 2 because Grid 1 is gradually being deprecated by the Selenium Team.

Selenium Grid uses a hub-node concept where you only run the test on a single machine called a hub, but the execution will be done by different machines called nodes. 

You should use Selenium Grid when you want to do either one or both of following:

• Run your tests against different browsers, operating systems, and machines all at the same time. This will ensure that the application you are Testing is fully compatible with a wide range of browser-O.S combinations.
• Save time in the execution of your test suites. If you set up Selenium Grid to run, say, 4 tests at a time, then you would be able to finish the whole suite around 4 times faster.

Following are the main differences between Selenium Grid 1 and 2.

Selenium Grid Architecture

Selenium Grid has a Hub and Node Architecture.

The Hub

• The hub is the central point where you load your tests into.
• There should only be one hub in a grid.
• The hub is launched only on a single machine, say, a computer whose O.S is Windows 7 and whose browser is IE.
• The machine containing the hub is where the tests will be run, but you will see the browser being automated on the node.

The Nodes

• Nodes are the Selenium instances that will execute the tests that you loaded on the hub.
• There can be one or more nodes in a grid.
• Nodes can be launched on multiple machines with different platforms and browsers.
• The machines running the nodes need not be the same platform as that of the hub.

Selenium grid can be set up in two different ways; one through command line and the other through JSON config file.

How to Set Up Selenium Grid? Using Command Line

In this section, you will use 2 machines. The first machine will be the system that will run the hub while the other machine will run a node. For simplicity, let us call the machine where the hub runs as "Machine A" while the machine where the node runs will be "Machine B." It is also important to note their IP addresses. Let us say that Machine A has an IP address of 192.168.1.3 while Machine B has an IP of 192.168.1.4.

Step 1

Download the Selenium Server from here.

Step 2

You can place the Selenium Server .jar file anywhere in your HardDrive. But for the purpose of this tutorial, place it on the C drive of both Machine A and Machine B. After doing this, you are now done installing Selenium Grid. The following steps will launch the hub and the node.

Step 3

• We are now going to launch a hub. Go to Machine A. Using the command prompt, navigate to the root of Machine A‘s - C drive, because that is the directory where we placed the Selenium Server.
• On the command prompt, type java -jar selenium-server-standalone-2.30.0.jar -role hub
• The hub should successfully be launched. Your command prompt should look similar to the image below

Step 4

Another way to verify whether the hub is running is by using a browser. Selenium Grid, by default, uses Machine A‘s port 4444 for its web interface. Simply open up a browser and go to http://localhost:4444/grid/console

Also, you can check if Machine B can access the hub‘s web interface by launching a browser there and going to where "iporhostnameofmachineA" should be the IP address or the hostname of the machine where the hub is running. Since Machine A‘s IP address is 192.168.1.3, then on the browser on Machine B you should type http://192.168.1.3:4444/grid/console

Step 5

• Now that the hub is already set up, we are going to launch a node. Go to Machine B and launch a command prompt there.
• Navigate to the root of Drive C and type the code below. We used the IP address 192.168.1.3 because that is where the hub is running. We also used port 5566 though you may choose any free port number you desire.
• NOTE: You now have to give path to the Gecko driver if using Firefox. Here is updated code that needs to be used

java -Dwebdriver.gecko.driver="C:\geckodriver.exe" -jar selenium-server-standalone-3.4.0.jar -role webdriver -hub http://192.168.1.3:4444/grid/register -port 5566

• When you press Enter, your command prompt should be similar to the image below.

Step 6

Go to the Selenium Grid web interface and refresh the page. You should see something like this.

At this point, you have already configured a simple grid. You are now ready to run a test remotely on Machine B.

To design test scripts that will run on the grid, we need to use DesiredCapabilites and the RemoteWebDriver objects.

• DesiredCapabilites is used to set the type of browser and OS that we will automate
• RemoteWebDriver is used to set which node (or machine) that our test will run against.

To use the DesiredCapabilites object, you must first import this package

To use the RemoteWebDriver object, you must import these packages.

Using the DesiredCapabilites Object

Go to the Grid‘s web interface and hover on an image of the browser that you want to automate. Take note of the platform, and the browserName showed by the tooltip.

In this case, the platform is "XP" and the browserName is "Firefox."

We will use the platform and the browserName in our WebDriver as shown below (of course you need to import the necessary packages first).

Using the RemoteWebDriver Object

Import the necessary packages for RemoteWebDriver and then pass the DesiredCapabilities object that we created above as a parameter for the RemoteWebDriver object.

Below is a simple WebDriver Testng code that you can create in Eclipse on Machine A. Once you run it, automation will be performed on Machine B.

 The test should pass.

Selenium grid configuration using JSON File:

JSON stands for Javascript Object Notation. It is a standard format used for interchange of data between browser and the web server. Selenium has an in built JSON config file that can be used to set up selenium grid.

Below are the steps to configure selenium grid using JSON config file.

Step 1) Download the code for JSON config file using the below path https://github.com/SeleniumHQ/selenium/blob/master/java/server/src/org/openqa/grid/common/defaults/DefaultHub.json

Here is the code

{
	  "port": 4444,
	  "newSessionWaitTimeout": -1,
	  "servlets" : [],
	  "withoutServlets": [],
	  "custom": {},
	  "capabilityMatcher": "org.openqa.grid.internal.utils.DefaultCapabilityMatcher",
	  "registryClass": "org.openqa.grid.internal.DefaultGridRegistry",
	  "throwOnCapabilityNotPresent": true,
	  "cleanUpCycle": 5000,
	  "role": "hub",
	  "debug": false,
	  "browserTimeout": 0,
	  "timeout": 1800
}

Step 2) Copy and paste the code on a text editor such as Notepad with the extension ‘.json‘

Step 3)Launch the hub using the below command using command prompt

java -jar selenium-server-standalone-2.53.1.jar -role hub -hubConfig hubconfig.json

NOTE: Selenium stand alone jar file and the json file must be present on the same directory

Step 4) The below screen will appear which indicates the hub is set up successfully

Step 5) Open web browser and try connecting to the below URL

http://192.168.43.223:4444/grid/console

NOTE: The URL may vary from machine to machine. URL followed by ‘Nodes should register to‘ on the above screen must be used.

Step 6) Grid Console screen will appear which indicates the hub is up and running

Configure NODES using JSON:

Step 1) Download the sample node configuration file provided by Selenium using the below URL https://github.com/SeleniumHQ/selenium/blob/selenium-2.53.0/java/server/src/org/openqa/grid/common/defaults/DefaultNode.json

NOTE: IF YOU ARE USING SELENIUM 3.0 OR ABOVE, THE BELOW JSON FILE MUST BE USED

https://github.com/SeleniumHQ/selenium/blob/master/java/server/src/org/openqa/grid/common/ defaults/DefaultNodeWebDriver.json

Step 2) Copy and paste the code into a text editor such as Notepad and save the file with the extension ‘.json’

Step 3)

Run the below command on command prompt

Java-Dwebdriver.chrome.driver="chromedriver.exe" -Dwebdriver.ie.driver="IEDriverServer.exe" -Dwebdriver.gecko.driver="geckodriver.exe" -jar selenium-server-standalone-2.53.1.jar -role node -nodeConfig node1.json

NOTE: Before running the command, please make sure the drivers for each of the browsers have been downloaded onto local machine directory

Step 4) The below screen will appear when enter key is pressed

Step 5) Navigate to the grid console to verify if the nodes have been successfully configured

The browsers are displayed on the grid console. Hence we can be sure that nodes are configured successfully.

Sample Test Cases On Selenium Grid:

 package com.objectrepository.demo;
 import org.openqa.selenium.*;
 import org.openqa.selenium.remote.DesiredCapabilities;
 import java.net.MalformedURLException;
 import java.net.URL;
 import org.openqa.selenium.remote.RemoteWebDriver;
 import org.testng.Assert;
 import org.testng.annotations.*;

 public class SeleniumGrid {

     WebDriver driver;
     String baseURL, nodeURL;

     @BeforeTest
     public void setUp() throws MalformedURLException {
         baseURL = "http://demo.guru99.com/test/guru99home/";
         nodeURL = "http://192.168.43.223:4444/wd/hub";
         DesiredCapabilities capability = DesiredCapabilities.chrome();
         capability.setBrowserName("chrome");
         capability.setPlatform(Platform.WIN10);
         driver = new RemoteWebDriver(new URL(nodeURL), capability);
     }

     @AfterTest
     public void afterTest() {
         driver.quit();
     }
     @Test
     public void sampleTest() {
         driver.get(baseURL);
         driver.get(baseURL);

         if (driver.getPageSource().contains("MOBILE TESTING")) {
             Assert.assertTrue(true, "Mobile Testing Link Found");
         } else {
             Assert.assertTrue(false, "Failed: Link not found");
         }

     }

 }

The above code launches chrome browser and navigates to the URL specified in the ‘baseURL’ variable. It verified a link name ‘Mobile Testing‘ is displayed on the page

URL on the ‘nodeURL‘ variable can be modified to reflect the IP Address of the remote machine. Test result can be verified on the default TestNG report generated

Summary

• Selenium Grid is used to run multiple tests simultaneously on different browsers and platforms.
• Grid uses the hub-node concept.
• The hub is the central point wherein you load your tests.
• Nodes are the Selenium instances that will execute the tests that you loaded on the hub.
• To install Selenium Grid, you only need to download the Selenium Server jar file - the same file used in running Selenium RC tests.
• There are 2 ways to verify if the hub is running: one was through the command prompt, and the other was through a browser
• To run test scripts on the Grid, you should use the DesiredCapabilities and the RemoteWebDriver objects.
• DesiredCapabilites is used to set the type of browser and OS that we will automate
• RemoteWebDriver is used to set which node (or machine) that our test will run agains

[Selenium+Java] Selenium Grid Tutorial: Command Line and JSON Example

标签：single   follow   machines   play   type   ring   chrome   central   debug   

原文地址：https://www.cnblogs.com/alicegu2009/p/9078216.html