标签：sed verify fir 同步 could cer cond i/o IV
在发生故障切换后，经常遇到的问题就是同步报错，下面是最近收集的报错信息。
在master上删除一条记录，而slave上找不到
Last_SQL_Error: Could not execute Delete_rows event on table hcy.t1;
Can‘t find record in ‘t1‘,
Error_code: 1032; handler error HA_ERR_KEY_NOT_FOUND;
the event‘s master log mysql-bin.000006, end_log_pos 254解决方法：master要删除一条记录，而slave上找不到报错，这种情况主都已经删除了，那么从机可以直接跳过。
stop slave;
set global sql_slave_skip_counter=1;
start slave;如果这种情况很多，需要针对这种错误专门写相关脚本。
在slave已经有该记录，又在master上插入了同一条记录。
Last_SQL_Error: Could not execute Write_rows event on table hcy.t1;
Duplicate entry ‘2‘ for key ‘PRIMARY‘,
Error_code: 1062;
handler error HA_ERR_FOUND_DUPP_KEY; the event‘s master log mysql-bin.000006, end_log_pos 924解决方法：
在slave上用desc hcy.t1; 先看下表结构：
mysql> desc hcy.t1;
+-------+---------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+-------+---------+------+-----+---------+-------+
| id | int(11) | NO | PRI | 0 | |
| name | char(4) | YES | | NULL | |
+-------+---------+------+-----+---------+-------+删除重复的主键
mysql> delete from t1 where id=2;
Query OK, 1 row affected (0.00 sec)
mysql> start slave;
Query OK, 0 rows affected (0.00 sec)
mysql> show slave status\G;
……
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
……
mysql> select * from t1 where id=2;在master上和slave上再分别确认一下。
在master上更新一条记录，而slave上找不到，丢失了数据。
Last_SQL_Error: Could not execute Update_rows event on table hcy.t1;
Can‘t find record in ‘t1‘,
Error_code: 1032;
handler error HA_ERR_KEY_NOT_FOUND;
the event‘s master log mysql-bin.000010, end_log_pos 794解决方法：
在master上，用mysqlbinlog 分析下出错的binlog日志在干什么。
/usr/local/mysql/bin/mysqlbinlog --no-defaults -v -v --base64-output=DECODE-ROWS mysql-bin.000010 | grep -A ‘10‘ 794
#120302 12:08:36 server id 22 end_log_pos 794 Update_rows: table id 33 flags: STMT_END_F
### UPDATE hcy.t1
### WHERE
### @1=2 /* INT meta=0 nullable=0 is_null=0 */
### @2=‘bbc‘ /* STRING(4) meta=65028 nullable=1 is_null=0 */
### SET
### @1=2 /* INT meta=0 nullable=0 is_null=0 */
### @2=‘BTV‘ /* STRING(4) meta=65028 nullable=1 is_null=0 */
# at 794
#120302 12:08:36 server id 22 end_log_pos 821 Xid = 60
COMMIT/*!*/;
DELIMITER ;
# End of log file
ROLLBACK /* added by mysqlbinlog */;
/*!50003 SET COMPLETION_TYPE=@OLD_COMPLETION_TYPE*/;在slave上，查找下更新后的那条记录，应该是不存在的。
mysql> select * from t1 where id=2;
Empty set (0.00 sec)然后再到master查看
mysql> select * from t1 where id=2;
+----+------+
| id | name |
+----+------+
| 2 | BTV |
+----+------+
1 row in set (0.00 sec)把丢失的数据在slave上填补，然后跳过报错即可。
mysql> insert into t1 values (2,‘BTV‘);
Query OK, 1 row affected (0.00 sec)
mysql> select * from t1 where id=2;
+----+------+
| id | name |
+----+------+
| 2 | BTV |
+----+------+
1 row in set (0.00 sec)
mysql> stop slave ;set global sql_slave_skip_counter=1;start slave;
Query OK, 0 rows affected (0.01 sec)
Query OK, 0 rows affected (0.00 sec)
Query OK, 0 rows affected (0.00 sec)
mysql> show slave status\G;
……
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
……误删二进制文件等各种原因，导致主库mysql-bin.000012文件丢失，从库同步失败。
Master_Log_File: mysql-bin.000012
Slave_IO_Running: No
Slave_SQL_Running: Yes
Last_IO_Error: Got fatal error 1236 from master when reading data from binary log: ‘Could not find first log file name in binary log index file‘首先停止从库同步
slave stop;查看主库日志文件和位置
mysql> show master logs;
+------------------+-----------+
| Log_name | File_size |
+------------------+-----------+
| mysql-bin.000013 | 154 |
+------------------+-----------+回从库，使日志文件和位置对应主库
CHANGE MASTER TO MASTER_LOG_FILE=‘log-bin.000013‘,MASTER_LOG_POS=154;最后，启动从库：
```bash
slave start;
show slave status\G;
Master_Log_File: mysql-bin.000013
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Last_IO_Error:
```
slave的中继日志relay-bin损坏。
Last_SQL_Error: Error initializing relay log position: I/O error reading the header from the binary log
Last_SQL_Error: Error initializing relay log position: Binlog has bad magic number;
It‘s not a binary log file that can be used by this version of MySQL1、手工修复
解决方法：找到同步的binlog和POS点，然后重新做同步，这样就可以有新的中继日值了。
例子：
mysql> show slave status\G;
*************************** 1. row ***************************
Master_Log_File: mysql-bin.000010
Read_Master_Log_Pos: 1191
Relay_Log_File: vm02-relay-bin.000005
Relay_Log_Pos: 253
Relay_Master_Log_File: mysql-bin.000010
Slave_IO_Running: Yes
Slave_SQL_Running: No
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 1593
Last_Error: Error initializing relay log position: I/O error reading the header from the binary log
Skip_Counter: 1
Exec_Master_Log_Pos: 821
Slave_IO_Running ：接收master的binlog信息
Master_Log_File
Read_Master_Log_Pos
Slave_SQL_Running：执行写操作
Relay_Master_Log_File
Exec_Master_Log_Pos以执行写的binlog和POS点为准。
Relay_Master_Log_File: mysql-bin.000010
Exec_Master_Log_Pos: 821mysql> stop slave;
Query OK, 0 rows affected (0.01 sec)
mysql> CHANGE MASTER TO MASTER_LOG_FILE=‘mysql-bin.000010‘,MASTER_LOG_POS=821;
Query OK, 0 rows affected (0.01 sec)
mysql> start slave;
Query OK, 0 rows affected (0.00 sec)
mysql> show slave status\G;
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.8.22
Master_User: repl
Master_Port: 3306
Connect_Retry: 10
Master_Log_File: mysql-bin.000010
Read_Master_Log_Pos: 1191
Relay_Log_File: vm02-relay-bin.000002
Relay_Log_Pos: 623
Relay_Master_Log_File: mysql-bin.000010
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 1191
Relay_Log_Space: 778
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error: 标签：sed verify fir 同步 could cer cond i/o IV
原文地址：https://www.cnblogs.com/zping/p/9145860.html
